Technical parameters of tuning fork type level switch

The tuning fork level switch adopts new technologies and chips from abroad, which have the advantages of long service life, stable performance, safety and reliability, as well as strong adaptability (different electrical parameters and densities of the measured medium do not affect the measurement), no need for calibration (no on-site calibration is required for any measured medium), and maintenance free characteristics. The tuning fork level switch is widely used in the process control of material level in metallurgy, building materials, chemical industry, light industry, grain and other industries.

Technical parameters of tuning fork level switch:

1. Power supply voltage: DC24V or AC220V;

2. Working temperature: Fork body -40~150 ℃;

3. Environmental temperature: -20~70 ℃;

4. Work pressure: ≤ 2MPa;

5. Medium density: ≥ 0.7g/cm3;

6. Output mode: Relay output (AC220V/, DC28V/10A);

7. Output delay: adjustable from 1 to 50 seconds;

8. Power consumption: 0.5W;

9. High and low level alarms: can be set to HLFS (high level alarm mode) or LLFS (low level alarm mode) on site;

10. Electrical interface: M20 × 1.5;

11. Process connection: 1 "NPT thread installation (standard, optional BSPT), flange installation (optional);

12. Shell protection: IP65;

Supply: Resistance rotary level switch, tuning fork level switch, RF admittance level switch, electrostatic capacitance level switch, single rod vibration level controller, stainless steel side mounted float level switch, magnetic flap level gauge, thermal conductivity flow switch