350 degree high temperature camera

NegotiableUpdate on 03/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 350 degree high-temperature camera XDP-3410S-1 is made of double-layer stainless steel and cast aluminum end caps. Circulating water is cooled through a cooling interlayer to achieve a cooling effect. Compressed air can enter the front end cap to form a wind curtain for dust prevention. It has good corrosion and dust resistance, and can be used in environments with high temperature, high dust, and corrosive gases. Color 1/3 CCD 700 line, PAL system, optional lenses of 4, 6, 8MM, etc. Widely used in industries such as metallurgy, power, glass, and building materials. (Used in environments below 350 degrees Celsius)

Product Details

　　350 degree high temperature cameraXDP-3410S-1 is made of double-layer stainless steel and cast aluminum end caps, with circulating water passing through a cooling interlayer to achieve cooling effect. Compressed air can enter the front end cap to form a wind curtain for dust prevention. It has good corrosion and dust resistance, and can be used in environments with high temperature, high dust, and corrosive gases. Color 1/3CD700 line, PAL system, optional lenses of 4, 6, 8MM, etc. Widely used in industries such as metallurgy, power, glass, and building materials. (Used in environments below 350 degrees Celsius)

　　350 degree high temperature cameraXDP-3410S-1Basic Parameters

model	XDP-3410S-1
Product Features	Good cooling effect, suitable for use in areas with abundant water resources and high operating temperatures
Environmental temperature for use	-50℃~+350℃
Dust concentration in the usage environment	≤ 200mg/m3 (based on cement dust as standard)
cooling water temperature	≤35℃
cooling water pressure	0.1Mpa
cooling water flow rate	0.3m3 /h
Protective cover protection capability	Meets IP56 standard
Compressed air temperature	≤35℃
Compressed air pressure	0.3~0.4Mpa
Compressed air flow rate	0.3~0.6m3 /min
camera	Color 1/3 CCD 700 line, PAL system, optional lenses of 4, 6, 8MM, etc.
power supply	12V DC