High temperature resistant camera

NegotiableUpdate on 03/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XDP-3410S-2 high-temperature resistant camera is made of double-layer stainless steel material, with cooling water passing through the interlayer to achieve cooling effect, and the front cover forming a wind curtain through compressed air to prevent dust. Has good corrosion resistance and can be used in environments with high temperature, dust, and corrosive gases. To achieve monitoring and control functions, it is widely used in industries such as steel, cement, and electricity to improve production efficiency, improve working conditions, and reduce labor intensity. Used in environments below 800 degrees Celsius.

Product Details

XDP-3410S-2High temperature resistant cameraMade of double-layer stainless steel material, the cooling water achieves cooling effect through the interlayer, and the front cover forms a wind curtain through compressed air to prevent dust. Has good corrosion resistance and can be used in environments with high temperature, dust, and corrosive gases. To achieve monitoring and control functions, it is widely used in industries such as steel, cement, and electricity to improve production efficiency, improve working conditions, and reduce labor intensity. Used in environments below 800 degrees Celsius.

　　XDP-3410S-2High temperature resistant cameraBasic Parameters

structural type	double-layer stainless steel
Imaging devices	1/3″SONY CCD
resolution	700LINE
Low illumination	0．5LUX
lens	4、6、8、12The16mmoptional
power supply	DC12V
Protection level	IP68
cable entry			2A waterproof inlet inner hole diameterΦ13
inlet and outlet		G1/4”
Window dust removal interface	G1/4”
mechanical properties
Mirror glass size(mm)			Φ60
Usage requirements
Operating temperature (℃)			0～+800
relative humidity	≤80% (40℃)
Atmospheric pressure（Kpa）	86～106
dust concentration(mg/ m³)	≤200(Based on cement dust as the standard)
Inlet water temperature (℃)	≤35
traffic(L/s)	0.3～0.6
Inlet water pressure(Mpa)	0.1
Dust removal compressed air pressure(Mpa)	0.1～0.4
air flow(L/s)	0.3～0.6