AC: 500V/60A Transformer Comprehensive Parameter Tester

Introduction to Intelligent Transformer Comprehensive Parameter Tester Instrument
The TPKZC-A intelligent transformer comprehensive parameter tester is a precision instrument developed and produced by Topu Electric specifically for detecting the power of power transformers. It can accurately measure the true effective values of parameters such as voltage, current, power, and power factor of three-phase electrical equipment. It has the characteristics of fast measurement speed, high accuracy, easy use, lightweight and beautiful appearance.
The TPKZC-A transformer electrical parameter tester uses digital synchronous sampling technology, which can replace nine pointer instruments of the same level and is an upgraded product of traditional power testing instruments.

Characteristics of Intelligent Transformer Comprehensive Parameter Tester
1. It can measure the no-load current, no-load loss, short-circuit voltage, and short-circuit loss of various types of transformers.
2. Use a 240 × 128 dot matrix LCD display screen to simultaneously display parameters such as three-phase voltage, current, low-voltage side voltage, power, and power factor.
3. Ensure accurate measurement of power factor 0.000-1.000, especially suitable for detecting low power factor loads.
4. Wide linear range, good repeatability of readings, and stable performance.
5. Convenient locking can ensure the simultaneity of measurement data and the convenience of operation.
6. Voltage circuit width limit: The maximum voltage can be measured up to 750V without switching gears to ensure accuracy. The instrument itself will not be damaged due to incorrect voltage gear selection.
7. Large screen, high brightness LCD display, full Chinese character menu and operation prompts enable friendly human-machine dialogue, and touch buttons make operation easier.
8. Users can print out the results of the test data at any time through a micro printer.

Precautions for using the intelligent transformer comprehensive parameter tester
1. During the measurement process, be sure not to touch the metal parts of the test line to avoid being damaged by electrical shock.
2. Measurement wiring must be strictly operated according to the instructions, otherwise the consequences will be borne by oneself.
3. Before testing, it is necessary to carefully check whether the set parameters are correct.
4. Use a grounded power socket.
5. Cannot operate under excessive voltage and current limits.
6. During the short-circuit test, the short-circuit on the non pressurized side must be in good condition, otherwise it will affect the test results.
7. When conducting a short-circuit test, if a ring current transformer is installed in the high-voltage or medium voltage side outlet bushing, the secondary of the current transformer must be short circuited before the test.
8. The experimental wiring work must be carried out with the tested circuit grounded to prevent induced voltage electric shock. All short circuits, grounding, and leads should have sufficient cross-sectional area and must be securely connected. The testing organization work should be rigorous and communication should be smooth to ensure the safe and smooth progress of the testing work.

Technical specifications of intelligent transformer comprehensive parameter tester
1. Input characteristics: (1) Voltage measurement range: 0-750V with a wide limit
(2) Current measurement range: 0-80A, all internal automatic switching ranges
2. Accuracy: (1) Voltage and current: ± 0.2%
(2) Power: ± 0.5% (Cos Φ>0.1), ± 1.0% (0.02 ＜ Cos Φ ＜ 0.1)
3. Working temperature: -10 ℃ to+40 ℃
4. Insulation: (1) The insulation resistance between the voltage and current input terminals and the casing is ≥ 100M Ω?.
(2) The working power input terminal is subjected to a power frequency of 2kV (effective value) between the casing for a 1-minute experiment.

Friendly reminder: When purchasing instruments, choose products from direct manufacturers, as product quality and after-sales service are guaranteed!

Top Electric's main products:
Variable frequency series resonance test device, DC high voltage generator, SF6 micro water meter, SF6 gas leak detector, SF6 gas purity tester SF6 density relay calibrator, test transformer, ultra-low frequency high voltage generator, cable fault tester, DC resistance tester, transformer ratio group tester, microcomputer relay protection tester, high voltage switch mechanical characteristic tester, insulation oil dielectric strength tester (insulation oil withstand voltage tester), frequency conversion anti-interference dielectric loss tester, fully automatic capacitance and inductance tester, circuit resistance tester (contact resistance tester), high current generator (current converter), grounding resistance tester, insulation resistance tester (megohmmeter), zinc oxide lightning arrester tester, transformer characteristic tester, insulation boot and glove withstand voltage tester, power safety tool mechanical performance tester (electronic force tester), wireless high voltage nuclear tester Phase meter, transformer capacity characteristic tester Transformer on load tap changer tester, transformer winding deformation tester, transformer characteristic comprehensive testing bench, lightning counter calibrator, vacuum degree tester, vacuum oil filter, solar photovoltaic junction box tester, electric heating appliances, insulation products, sliding wire guide rail bridge, etc.

Yangzhou Top Electric Technology Co., Ltd
Address: No.2 Guotai Road, Baoying Economic Development Zone, Jiangsu Province
Telephone:
mobile phone:
Fax:
Email: yztpdq@yztpdq.com
Topp: www.yztpdq.com
拓普： www.topcsy.com
：843058685 846879366