Ailian Intelligent Network Electronic Fence

Ailian Intelligent Network Electronic FenceHost product features:

Supports external power supply DC12V 3A DC power supply, and also supports POE network power supply technology, which can be powered by POE switches.

2. Intelligent display: Equipped with a ≥ 3.2-inch LCD screen, the host's working status, alarm parameters, and defense zone address information are clear at a glance.

3. Adopting TCP/IP communication, supporting applications across network segments and routes.

4. Support access to the local network through RJ45 network port, and support high and low voltage deployment and disarming functions in the center.

5. Support ≥ 2 independent Ethernet alarm centers.

6. Support PC configuration tool upgrade and programming.

7. It is possible to read device programming data through IP, import and export programming data, and configure parameters.

8. The system adopts a design concept of high voltage and low energy, which does not pose a threat to human life.

9. Differential voltage output technology: There is voltage on each line, and there is a voltage difference between adjacent lines.

10. Adjustable high and low voltage output voltage: Low voltage setting range: 0.8kv~1.2kv; High voltage setting range: 3.0kV to 5.5kV.

11. The high and low voltage working modes can be switched, set to automatic mode, outputting low voltage during normal operation and high voltage during alarm.

12. Pulse electronic fence has functions such as disassembly alarm, disconnection alarm, short circuit alarm, battery low voltage alarm, and switch input alarm.

13. Supports built-in ≥ two alarm outputs (DC12V) and two switch signal outputs.

14. Equipped with ≥ two switch input alarms, one normally open and the other normally closed.

15. Supports built-in 4 and 5Ah batteries, which can continue to work for 7-8 hours in the event of a power outage, and automatically switch to mains power supply when power is restored.

16. There is a prompt for battery reverse connection or short circuit, and a prompt for low or high system power supply voltage.

17. Power off memory: After the device is powered off, it can remember its original working state.

18. Power supply: DC12V 3A or POE power supply

19. Host display: ≥ 3.2-inch LCD screen

20. System power consumption: 15W

21. Communication method: Supports RS485, TCP/IP, and switch communication

22. I/O interface: Comes with two sets of switch inputs, two sets of switch outputs, and two sets of 12V alarm signal outputs

23. Peak output high voltage: 3.0KV~5.4KV

24. Output low voltage peak value: 0.8V~1.2KV

25. Peak value of pulse current:<10A

26. Pulse duration: ≤ 0.1s

27. Pulse interval time: 1-1.2s

28. Pulse output power ≤ 2.6mC, pulse output energy ≤ 5.1J

29. It has real-time monitoring of the operating status of various access devices in the terminal system, and can transmit alarm numbers to corresponding management personnel in real time according to the scope of authority

30. The surface coating of the metal shell should cover the underlying metal, without bubbles, corrosion, scratches, coating peeling, or sand holes. The shell and parts of the terminal should be free of sharp edges, burrs, and undercuts;

Electrical parameters of intelligent pulse electronic fence host:

Product models: AN-EF/B4 (four wire dual protection zone), AN-EF/B6 (six wire dual protection zone)

Power supply: DC12V 3A

Communication method: 485 bus

Working temperature: -20~50 ° C

Relative humidity:<95%

Shell size: 340 * 245 * 140mm

Pulse output parameters:

Output high voltage peak: 2 * 3KV~2 * 6KV

Output low voltage peak: 2 * 0.5KV~2 * 2KV

Maximum energy output per single pulse: ≤ 5.0J

Maximum power output per pulse: 2.5mC

Peak value of pulse current:<10A

Pulse interval time: 1s

Pulse duration: ≤ 0.1s

System power consumption: 10W for single zone and 15W for dual zone