BRAUN GMBH speed sensor

BRAUN GMBH Industrie Elektronik Monitoring and Protection System for Rotating Equipment in Industrial Applications and Hazardous Areas

The Braun protection system for rotating equipment covers different usage areas and exists in safety critical industries. Mainly used in power plants of major power generation companies in the petroleum, natural gas, and chemical industries.

With over 60 years of experience, Braun has extensive expertise in developing customized applications. Therefore, we can quickly adapt standardized solutions to specific applications.

art museum

power generation

power generation

Steam turbine/gas turbine/water turbine

The power generation industry requires a particularly high level of safety and protection, especially in terms of turbine overspeed protection.

Due to downtime being a critical cost factor, turbines in power plants should only be shut down when absolutely necessary. On the other hand, it is necessary to be able to shut down the turbine when necessary to prevent harm to people and machines. And this is precisely where our protection system proves its value.

The Braun protection system monitors these factories and ensures the smooth operation of safety critical applications, including rotating components such as power generation. It can be implemented according to SIL3 certification.

Related products:

Protection system

speed sensor

art museum

Turbine processing plant

Turbine processing plant

Steam turbine/gas turbine/compressor/expander

The application of turbines places particularly high demands on safety and protection, especially for overspeed protection of turbines, compressors, and expanders.

Complex systems including turbines, compressors, and other equipment should only be shut down when absolutely necessary, as non critical downtime is an expensive task. But at the same time, if there are situations that require action, it must be possible to shut down these systems. And this is precisely where our protection system proves its value.

The Braun protection system monitors these systems and ensures the smooth operation of safety critical applications, including rotating components such as turbines. If this is a requirement, it can be implemented according to the regulations of SIL3 certification.

Related products:

Protection system

speed sensor

art museum

Other industrial applications

Other industrial applications

Variable drive/pump/fan/conveyor/generator/gear/motor

Industrial applications, including rotating equipment, require a high level of safety and protection, especially overspeed protection. In this field of activity, our system monitors pumps, conveyors, motors, and transmission equipment. In addition, our customers use our protection system to detect speed and direction suitable for automotive and power tool testing. Further applications can be found in research and development, as well as maintenance of machines and equipment.

The Braun protection system monitors these devices and provides necessary safety and operational stability for factories using rotating equipment. Compliant with SIL3 certification, if necessary.

Related products:

Protection system

speed sensor

tachometer

art museum

Dangerous areas

Dangerous areas

Suitable for hazardous areas with increased ignition or explosion risk due to gas or dust

The demand environment requires exceptional solutions. For example, there is a risk of explosion in petrochemical plants. To eliminate this possibility, we offer specially developed products, but require additional or even stricter quality control.

All regions use Braun speed sensors and barriers, which increase the risk of ignition or explosion due to gas or dust. Therefore, we have been providing our ATEX/EECX, UL/CSA certified products, as well as the correct solutions in these areas, especially in critical areas.

Related products:

Humanitarian Effect Sensor (Essentially Safe)

Isolation barrier D461R1 of A5S1... sensors in hazardous areas

Series A5S - Various Types and Their Characteristics

The correct selection of sensors has always been a prerequisite for successfully solving problems Our A5S speed sensor is based on the validated differential effect principle. Their low-end 0 Hz allows monitoring machines to drop to zero speed. In addition, they are contactless, wear-resistant, and maintenance free. In addition, they are not affected by external magnetic fields and machine vibrations These features make the series of A5S sensors particularly suitable for all high-precision and reliable applications. On the contrary, other sensors such as magnetic induction or static sensors do not meet these requirements.

Each sensor in this series comes in different lengths and diameters, and has connection options. However, all sensors have the same characteristics in terms of functionality.

The stainless steel sensor housing is sealed at the front and is pressure resistant (200 strips). Can provide a flat shaft or be equipped with a threaded input line M12x1、M14x1、M14x1、M16x1、M16x1、M16x1、M18x1、M18x1、M22x1、5/8-18UN-2A。 Customized sizes and thread specifications are possible

To meet the specific requirements of hazardous areas, we provide certified special types of ATEX, UKEX, EECX, as well as other international standards such as UL/CSA and EAC (Eurasian Customs Union of Russia, Kazakhstan, and Belarus).

In terms of hazardous areas (zone 0-1), combined with our isolation barrier D461, it is essentially safe

For hazardous areas (Zone 2), non incendiary changes can be provided

Non sparking series A5S1-N-N type non sparking sensor.

To meet the specific requirements of hazardous areas, we provide certified special types of ATEX, UKEX, EECX, as well as other international standards such as UL/CSA and EAC (Eurasian Customs Union of Russia, Kazakhstan, and Belarus). For hazardous areas (Zone 2), non incendiary changes can be provided. No need for isolation barrier D461.

The correct selection of sensors has always been a prerequisite for successfully solving problems Our A5S sensor is based on the validated principle of differential effects. Their low-end 0 Hz allows monitoring machines to drop to zero speed. In addition, they are contactless, wear-resistant, and maintenance free. In addition, they are not affected by external magnetic fields and machine vibrations These features make the series of A5S sensors particularly suitable for all high-precision and reliable applications. On the contrary, other sensors such as magnetic induction or static sensors do not meet these requirements.

Sensors can actually detect any steel profile: fine or coarse, spiral or straight gears, nuts, or polar wheels with large and small cams. According to the application, the speed range ranges from a stationary state to 25000 pulses per second (0 Hz. 25 kHz).

Each sensor in this series comes in different lengths and diameters, and has connection options. However, all sensors have the same characteristics in terms of functionality. The stainless steel sensor housing is sealed at the front and is pressure resistant (200 pieces). Can provide a flat shaft or be equipped with a threaded input line M12x1、M14x1、M14x1、M16x1、M16x1、M16x1、M18x1、M18x1、M22x1、5/8-18UN-2A。 Customized sizes and thread specifications are possible

A5S1 Product Matrix Differences - Impact Sensor (Overview)

art museum

A5S1DD0…-n

A5S1DD0…-n

Sensor A5S1DDS-N for detecting the speed of hazardous area 2

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 25 kHz

Single channel, output display speed as a single track frequency signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

Install in hazardous areas as a non spark operation resource

UKX, EECX certified T4/T6GC

QPS/QPSS certified according to UL and CSA standards, Class I, Groups B, C, and D

Certified by the Hong Kong Industrial and Trade Commission as International Trade Centre T4/T6GC

Differential Sensor Series A5S0

The correct selection of sensors has always been a prerequisite for successfully solving problems Our A5S speed sensor is based on the verified principle of differential effects. Their low-end 0 Hz allows monitoring machines to drop to zero speed. In addition, they are contactless, wear-resistant, and maintenance free. In addition, they are not affected by external magnetic fields and machine vibrations These features make the series of A5S sensors particularly suitable for all high-precision and reliable applications. On the contrary, other sensors such as magnetic induction or static sensors do not meet these requirements.

Sensors can actually detect any steel profile: fine or coarse, spiral or straight gears, nuts, or polar wheels with large and small cams.

Depending on the application, the speed range ranges from a stationary state to 25000 pulses per second (0 Hz. 25 kHz).

Each sensor in this series comes in different lengths and diameters, and has connection options. However, all sensors have the same characteristics in terms of functionality. The stainless steel sensor housing is sealed at the front and resistant to pressure (200 strips). Can provide a flat shaft or be equipped with a threaded input line M12x1、M14x1、M14x1、M16x1、M16x1、M16x1、M18x1、M18x1、M22x1、5/8-18UN-2A。 Customized sizes and thread specifications are possible

A5S0 Product Matrix Differences - Impact on Sensors (Overview)

art museum

A5S0DD0

A5S0DD0

Sensor A5S0D0 for detecting rotational speed

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 25 kHz

Single channel, output display speed as a single track frequency signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

details

art museum

A5S0DD3

A5S0DD3

Sensor A5S0D3 for detecting rotational speed and direction

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 25 kHz

Dual channel, 1 track=speed as frequency, 1 track=F/R state as binary signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

details

art museum

A5S0DD4

A5S0DD4

A5S0DD4 sensor, used to detect the speed and speed direction of two phase shift speed signals

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 25 kHz

Dual channel, output display speed as dual track frequency signal (phase transformation)

Suitable for external detection with strong security

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

details

art museum

A5S0DS0

A5S0DS0

Sensor A5S0DS0 for detecting rotational speed

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 12 kHz

Single channel, output display speed as a single track frequency signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

details

art museum

A5S0DS3

A5S0DS3

Sensor A5S0Ds3 for detecting rotational speed and direction

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 12 kHz

Dual channel, 1 track=speed as frequency, 1 track=F/R state as binary signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

details

art museum

A5S0DS4

A5S0DS4

A5S0DS4 sensor, used to detect speed and direction of speed using two phase shift speed signals

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 12 kHz

Dual channel, output display speed as dual track frequency signal (phase transformation)

Suitable for external detection with strong security

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

Tachometer and installation device for monitoring set points, converting and displaying speed, velocity, and flow rate

These units receive input signals from speed sensors or flow transmitters. Some are equipped with specially designed signal inputs, our A5S sensors are installed, and some are equipped with universal signal inputs that serve any other type of sensor. Therefore, the device can be adjusted to adapt to each application.

Speedometer Product Matrix (Overview)

The signal input of the model silicon simulates the output of the alarm as SPDT relay alarm output as photoelectric relay data interface

D521.02 USB 2.0

D521.04 USB 2.0

D521.10 USB 2.0

D521.12 USB 2.0

D521.14 USB 2.0

D521

Single channel speed monitoring series D521, increasing safety requirements up to SIL1

Monitoring with sensor monitoring and self testing capabilities

5-digit red LED display

The frequency range is 0 Hz. . 50 kHz

Universal signal input, also applicable to magnetic receiving sensors (MPS)

1 Analog Output 0/4…20 mA or 0/2…10 V (for versions D521.10, D521.12, D521.14)

2 alarm outputs are SPDT relays (for versions D521.02, D521.04, D521.12, D521.14)

2 alarm outputs as photoelectric relays (for versions D521.04, D521.14)

Square wave pulse output

data interface

Minimize TCO as there is no maintenance throughout the lifecycle

A monitor with two appropriately configured alarm outputs connected together can provide a protection system with 1oo2 or 2oo2 redundancy

Improved structural safety in OO2

Maximum availability of 2OO2 architecture

Universal power supply range 20... 265

(Essentially Safe) Series A5S1 Differential Humanitarian Effect Speed Sensor

To meet the specific requirements of hazardous areas, we provide certified special types of ATEX, UKEX, EECX, as well as other international standards such as UL/CSA and EAC (Eurasian Customs Union of Russia, Kazakhstan, and Belarus). In addition, for hazardous areas (zone 0-1), we provide an inherently safe implementation in conjunction with our isolation barrier D461.

The correct selection of sensors has always been a prerequisite for successfully solving problems Our A5S sensor is based on the validated principle of differential effects. Their low-end 0 Hz allows monitoring machines to drop to zero speed. In addition, they are contactless, wear-resistant, and maintenance free. In addition, they are not affected by external magnetic fields and machine vibrations These features make the series of A5S sensors particularly suitable for all high-precision and reliable applications. On the contrary, other sensors such as magnetic induction or static sensors do not meet these requirements.

Sensors can actually detect any steel profile: fine or coarse, spiral or straight gears, nuts, or polar wheels with large and small cams. According to the application, the speed range ranges from a stationary state to 25000 pulses per second (0 Hz. 25 kHz).

Each sensor in this series comes in different lengths and diameters, and has connection options. However, all sensors have the same characteristics in terms of functionality. The stainless steel sensor housing is sealed at the front and is pressure resistant (200 pieces). Can provide a flat shaft or be equipped with a threaded input line M12x1、M14x1、M14x1、M16x1、M16x1、M16x1、M18x1、M18x1、M22x1、5/8-18UN-2A。 Customized sizes and thread specifications are possible

A5S1 Product Matrix Differences - Impact on Sensors (Overview)

art museum

A5S1DD0

A5S1DD0

Sensor A5S1D0 for detecting the speed of 0 or 1 in hazardous areas

No contact, no wear, no maintenance

Not sensitive to external magnetic fields and machine vibrations

Suitable for all applications with high precision and reliability

The frequency range is 0 Hz. . 25 kHz

Single channel, output display speed as a single track frequency signal

Security level TV certification: 2010

TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012

License and Television Limited Certification Computer Language 3/IEC 62061:2015

Need to isolate wall D461

As an inherently safe operational resource installed in hazardous areas

Certified by the T4/T6 Conference of International Insurance Companies

QPS/QPSS certified according to UL and CSA standards, Class I, Groups B, C, and D

Obtained T4/T6 certification from the International Investment Center

Monitoring and protection system for rotating equipment with the highest safety requirements (SIL2)

Customized according to the specific requirements of each customer, Braun offers a comprehensive range of protection systems. From a single channel solution that meets advanced security considerations to a high availability OO3 solution, three module redundancy (TMR) is used to achieve the highest system security and machine availability.

Single channel protection system up to SIL2

Single channel protection system up to SIL2

Extended safety requirements for rotational speed monitoring

Used for monitoring engines, pumps, and small turbines.

Can be used as a single channel solution in 1OO1, 1OO2, or 2OO2 architectures.

Three channel protection system (TMR) to SIL3

Three channel protection system (TMR) to SIL3

Monitoring and protection system with the highest safety requirements

Rotating equipment and turbines, compressors, and expanders used to prevent overspeed and other important conditions.

Customized Tmm system version to SIL3

Customized Tmm system version to SIL3

Customize monitoring and protection systems according to the highest security requirements

Our main OEM customers must meet precise requirements for protecting rotating equipment and turbines.

BRAUN GMBH speed sensor

BRAUN GMBH speed sensor

Brand: TRACO POWER

Model: TEP-75WI series

TRACO POWER TEP-75WI Series Product Introduction

The TEP-75WI series is an isolated high-performance DC/DC converter module series with an ultra wide 4:1 input voltage range and a sturdy sealed metal casing. These converters are suitable for a wide range of applications. For the convenience of connection, a special adapter with screw terminals is also provided. Very high efficiency allows for operating temperatures up to+60 ° C without reducing power in natural convection cooling. Other functions include output voltage fine-tuning, remote on/off, and undervoltage locking. The very wide input voltage range and reverse input voltage protection make these converters a solution for battery powered systems as well.

TRACO POWER TEP-75WI series TRACO POWER TEP-75WI series Performance characteristics

Sturdy and compact metal casing

Can provide screw terminal adapters for easy connection

EN 50155 Railway Application Certification

Ultra wide 4:1 input voltage range

Full load operation temperature up to+60 ° C with convective cooling

Under voltage locking

Reverse input voltage protection

Input protection filter

TRACO POWER TEP-75WI Series Technical Parameters

Power: 75 W

Input: 9-36, 18-75, 43-1 60 VDC

Output: 3.3, 5, 12, 15, 24, 28, 48 VDC

Brand: TOSHIBA

Model: G9400

TOSHIBA uninterruptible power supply G9400 TOSHIBA G9400 product introduction

The Toshiba G9400 series uninterruptible power supply system (UPS) takes the proven design and performance of the G9000 series to a new level of efficiency, reliability, and performance. The G9400 series adopts the new generation IGBT technology, which is the "engine" of UPS. The G9400 technology allows for high power density in a small size and high online efficiency under various loads, making it an ideal choice for large-scale hosting or ultra large scale data departments worldwide.

TOSHIBA uninterruptible power supply G9400 TOSHIBA G9400 performance characteristics

提供 60 Hz / 480V / 1200kVA、1600kVA 和 2000kVA 型号

Suitable for global applications, also available in 60/50Hz/380 to 415V/1050kVA, 1400kVA, and 1750kVA models

The special parallel power module design allows for built-in redundancy and continuous power quality protection for loads

Easy parallel connection of up to six capacity units or any N+x critical power level redundancy. Each UPS has built-in parallel monitoring, eliminating expensive intelligent solutions or monitoring requirements in parallel gears

The ability to perform self load testing is a special alternative to using expensive external load boxes during UPS startup and preventive maintenance

Remote monitoring through Toshiba's RemotEye 4 IoT Multi Protocol Card

Compatible with various new energy storage systems (ESS) including VRLA, wet batteries, nickel cadmium, nickel zinc, or Toshiba's SCiB lithium-ion batteries

Three year warranty reduces ownership costs

TOSHIBA uninterruptible power supply G9400 TOSHIBA G9400 technical parameters

Voltage range: -20% to+15% (without battery)

Power factor:>0.98 lagging

Voltage regulation:+/-1%

Temperature range: 32 ° to 104 ° F (0 ° to 40 ° C)

Relative humidity: 5% to 95% without condensation

Brand: TIPPKEMPER

Model: ILS series

TIPPKEMPER Grating ILS Series Product Introduction

Tipkemper Matrix GmbH, founded in 1973, is a medium-sized family owned enterprise with multiple branches in Germany and Switzerland. It is one of the sensor manufacturers in the field of industrial automation. In addition to optical, inductive, and capacitive sensors, they also focus on sensor solutions for potential explosive applications. For about 50 years, we have been solving customer challenges every day and providing suitable products and solutions for difficult and special tasks and applications. Continuously strive to meet customer needs in development, production, management, sales, and customer service.

The ILS series is a high-performance grating.

TIPPKEMPER Grating ILS Series Performance Characteristics of TIPPKEMPER ILS Series

The assembly and calibration of transmitters and receivers are customer friendly and easy to handle

The range can reach 600m

Extremely insensitive to dirt

Strong penetration ability

Not sensitive to external light

Stable metal casing

Protection level IP 67

TIPPKEMPER Grating ILS Series Technical Parameters

Wood and Paper Industry

Concrete, cement, and gravel plants

Recycling plant

Batch control

Brand: TE

Model: ED9904-000

TE Electronic Power Meter ED9904-000 Product Introduction

TE provides power solutions for electric vehicles, airplanes, digital factories, and smart homes. Innovation can achieve sustainable communities, utility networks, and global communication infrastructure. For over 75 years, they have been collaborating with customers to produce highly engineered connectivity and sensing products that make the connected world possible. Their focus on reliability and durability, their commitment to progress, and their broad product portfolio enable companies big and small to transform ideas into technologies that can change the way the world works and lives in the future. An electronic power meter, also known as a digital or smart meter, is a device that measures the electrical energy consumed by businesses or electrical equipment in a digital manner. This type of instrument can be remotely tracked through digital connections, allowing utility providers and building owners to manage usage requirements and other electrical parameters.

TE Electronic Power Meter ED9904-000 Performance Characteristics of TE ED9904-000

Measure the consumed electrical energy digitally

Brand: TEXIO

型号： ASR501-351 ASR501-351G ASR102-351 ASR102-351G

TEXIO Programmable ACDC Power Supply ASR501-351 TEXIO ASR501-351 ASR501-315G ASR102-351 ASR102-351G Product Introduction

The ASR series has rich measurement functions, harmonic analysis mode sequences, simulation testing functions, and arbitrary waveform editing. In addition, it has 9 output modes that combine AC+DC internal+external signals.

Equipped with USB and LAN interfaces

Optional GPIB and RS-232C interfaces

Color LCD display screen is more intuitive and easy to operate

TEXIO Programmable ACDC Power Supply ASR501-351 TEXIO ASR501-351 ASR501-315G ASR102-351 ASR102-351G Performance Features

Sequence pattern

There are 10 sets of sequence modes, each with a maximum of 999 steps and a step size of 100 μ s -99.999. Time can be set within this range. Edit the required DC components and complex waveforms by combining multiple steps. The sequence can be saved to memory or USB storage.

simulation function

It can quickly simulate different transient waveforms such as power interruption, voltage increase, voltage decrease, etc. for engineering personnel to evaluate the impact of transient phenomena on the test object. For example, durability testing of capacitors. 10 simulated waveforms can be stored in local memory. It can also be saved in USB memory.

display mode

It has three display modes: standard, simple, and harmonic. It displays three selected settings in the standard display mode. Display the measurement values of all available items in simple mode and switch between displaying the effective value, average value, and peak value. Display the measured values of 40th harmonic voltage and harmonic current in harmonic mode on 4 pages.

output waveform

In addition to the built-in sine wave, square wave, and triangular wave, there are also 16 arbitrary waveforms (4096 points) that can be edited. Additionally, the phase can be independently set to ON and OFF.

Peak current maxCF=4

For capacitor input rectifier loads, the peak current max can reach 4 times the rated current max (effective value). (Within 5 milliseconds)

T Ipeak、 Maintain functionality

T Ipeak、 After the function setting is activated, a delay time (1ms~60s) can be set from the start of output to the start of measurement, and then the peak current value (MAX) can be maintained. This function can eliminate the measurement and judgment of surge current (MAX) caused by output ON.

Selection Guide

TEXIO Programmable ACDC Power Supply ASR501-351 TEXIO ASR501-351 ASR501-315G ASR102-351 ASR102-351G

Optional Features and Accessories

attachment

CD-ROM (user manual, programming manual)

Terminal cover: output terminal and sensing terminal (I) power cord

GTL-246 USB cable: approximately 2m TypeA-TypeB

GTL-123 test line: approximately 1m40A

accessories

GET-003: Extended Universal Power Socket

GRA-439-J: Rack Installation Kit (JIS)

GRA-439-E: Rack Installation Kit (EIA)

GTL-232: RS-232C line approximately 2m

GTL-258: GP-IB line approximately 2m

TEXIO Programmable ACDC Power Supply ASR501-351 TEXIO ASR501-351 ASR501-315G ASR102-351 ASR102-351G

Product size

Brand: TWK

Model: NOCIO/S3 SIL2/PLd

TWK Cam Controller NOCIO S3 SIL2 PLd TWK NOCIO S3 SIL2 PLd Product Introduction

The NOCIO79 equipment has a structure that complies with IEC 61508 and ISO 13849. This involves a gapless electronic switch cam encoder (NOCIO) with two current isolated switch outputs (SIL 2 and PLd) that can be configured by the customer. Activate or disable the output based on the position of the drive shaft or its speed and acceleration characteristics. The parameterized multi turn encoder with IO Link interface and the switch cam encoder with independent controller are integrated in a compact housing. Multiple parameter settings can be made through the IO Link interface.

TWK cam controller NOCIO S3 SIL2 PLd TWK NOCIO S3 SIL2 PLd performance characteristics

Non playable digital version used to replace electromechanical switch cam encoder

Used for fixed and mobile machines and systems, especially suitable for wind power plants, power plants, cranes, etc.

Integrated (SIL2, PLd) multi turn rotary encoder with standard IO Link interface

Switch output controlled electronically by axis position or axis velocity/acceleration

Two switch outputs (forced drive relay)

The switch output and IO Link position signal can be preset and adjusted through IO Link

Durable design with high vibration and impact resistance

Can be preset at the factory (such as position or speed/acceleration tripping)

TWK cam controller NOCIO S3 SIL2 PLd TWK NOCIO S3 SIL2 PLd technical parameters

Brand: ULO OPTICS

Model: 48TSL75

ULO OPTICS f-theta Scanner Lens 48TSL75 Product Introduction

ULO Optics' ZnSe single line scanning lens (TSL series) has been optimized to reduce off-axis aberration to a lower level.

ULO Optics has been a supplier of scanning lens technology for nearly thirty years, offering a wide range of single, double, and triple f-theta lenses on the market. As a company that brought these lenses to market, ULO developed the 48TSL series, which is now considered the industry standard. These lenses are typically used in conjunction with their CO2mpact series beam expander (C-BE series). All scanner optics can be coated according to your specifications or their Supermax or UltraLO coatings can be obtained from inventory for better performance.

ULO OPTICS f-theta scanner lens 48TSL75 ULO OPTICS 48TSL75 performance characteristics

Better compromise of all aberrations, field flatness, and f-theta errors using a single component spherical lens

For beams with a diameter not exceeding 15mm

Focal length from 75mm to 2122mm or above

Coverage area ranges from 50mm to 1500mm square

Expanded to many carving, marking, and cutting applications

Designed to be positioned at the same position relative to the scanning mirror, so it can be directly replaced with other focal lengths

Can also be installed

Can provide coatings of various wavelengths

Selection Guide

Brand: Ultratek

Model: PREAMP2

Ultratek Preamp PREAMP2 Product Introduction

PREAMP2 is a broadband, low-noise, multi-channel preamplifier used for ultrasonic testing and acoustic emission testing. In ultrasonic testing, especially for TOFD methods, series probes, and FAST transducers with long coaxial cables, ultrasonic signals are usually weak. Therefore, additional gain and signal-to-noise ratio enhancement are necessary for appropriate signal acquisition. In the acoustic emission testing system, the ability to amplify low signal amplitude events and drive long cables connected to remote sensors is also required. The PREAMP2 preamplifier is equipped with two different sizes. The size of the compact module is 3 'x 2' x 1 '. The 9V battery option still offers up to 4 amplifier channel sizes of 4 5/8 'x 2 3/4' x 1 '. Each amplifier is independent of other amplifiers and can be easily set to a separate gain by adjusting the potentiometer. All input and output connections are protected from high-voltage transients such as sensor excitation pulses. The output can drive coaxial cables over 300 feet (100 meters) in length. PREAMP2 uses a wide DC power supply ranging from 5VDC to 26VDC.

Ultratek preamplifier PREAMP2 Performance characteristics

Capable of driving long coaxial cables

Wide bandwidth from 500 kHz to 30 MHz (20kHz optional)

compact

Amplifier with up to 4 channels

Gain can be adjusted through potentiometer

Channel independent of gain adjustment

Durable and sturdy, specifically designed for special environments

high signal-to-noise ratio

Powered by 9V battery or AC adapter

Wide input voltage range of DC power supply

Input protection for high-voltage transients

User specified connector

Ultratek preamplifier PREAMP2 Technical parameters

Size:

Compact module: 3 'x 2' x 1 '

9V battery module: 4.6 'x 2.75' x 1 '

Power range: 5VDC to 26VDC (recommended 6VDC to 13VDC)

功耗： PREAMP2-A：13 mA PREAMP2-B：26 mA PREAMP2-C：39 mA PREAMP2-D：52 mA

Input voltage: 0.5V pp

Input coupling: AC coupling

Output voltage: ± 1.1V min value

Bandwidth (-3dB): 0.5 MHz to 30 MHz (20 kHz optional)

Gain range: 10 to 60dB

Temperature range: -40 º C to 60 º C

Signal to noise ratio: 67 dB

Humidity: 20% to 90% for 9V module, 20% to condensation

Brand: Ultratek

Model: LOGAMP3

Ultratek LogAMP3 Product Introduction

LOGAMP3 is an independent logarithmic amplifier (log amp). It provides high-speed logarithmic signal compression from microvolts to volts with good linearity. Both positive and informational aspects can be processed over a wide range of duty cycles. LOGAMP3 is widely used for ultrasonic testing of high attenuation materials, which require obtaining high dynamic range signals on an oscilloscope screen without the need for high-resolution ADC instruments. The applications of ultrasonic testing include composite material evaluation, rough surface corrosion mapping, small defect detection, and testing with a wide range of signal amplitudes. Other applications include LiDAR, laser, and electro-optical.

Ultratek logarithmic amplifier LOGAMP3 Performance characteristics

High speed logarithmic signal compression

High dynamic range - up to 90 dB

Optional input coupling

Optional input impedance

compact size

Input protection for high-voltage transients

Ultratek logarithmic amplifier LOGAMP3 Technical parameters

Input impedance: 100 or 50 ohm switch optional

Input coupling: AC or DC switch optional

Input range: 0.0001 to 10 Vp-p

Input noise: 16 microvolts (typical value)

Pulse response:

Rise time: 12 ns (DC-30 MHz)

Descent time: 15 ns (typical value)

Working temperature: 0 ° C to 50 ° C

Single ended output noise: 7mVRMS typical value load:>=50 ohms slope: 29 mV/dB typical value

Polarity: Same phase

Linearity:+/-1 decibel

Power 12VAC/100mA through AC/AC adapter

Size: 4.5 "x2.7" x1.2 "(107mm x 70mm x 30mm)

Weight: 7 ounces (0.2 kilograms)

Brand: TWK

Model: NOCE79/S3 SIL2

TWK Cam Controller NOCE79 S3 SIL2 TWK NOCE79 S3 SIL2 Product Introduction

It is a gapless electronic cam controller (NOCE) with up to four electrically isolated SIL2 switch outputs that can be set by the customer and activated or deactivated based on the corresponding position of the drive shaft. The parameterized multi turn angle sensor with SSI interface is integrated into a compact housing, and the cam switch circuit board also comes with a separate controller. The SSI interface can preset code direction and switch output. Special shaft design suitable for gap compensation target wheel ZRS can be provided. The power supply voltage, SSI signal, and switch contacts are all electrically isolated from each other.

TWK cam controller NOCE79 S3 SIL2 TWK NOCE79 S3 SIL2 performance characteristics

The seamless design can replace the use of electromechanical cam switches

Used for fixing and moving machines and systems, especially power plants, wind turbines, cranes, etc.

Up to four electronically controlled SIL2 switch outputs (relays)

Integrated multi stroke SIL2 encoder with standard SSI interface

Can output and SSI position signal through preset input, preset switch output, and SSI position signal

Position resolution: up to 15 bits

A sturdy structure with high resistance to vibration and impact

TWK Cam Controller NOCE79 S3 SIL2 TWK NOCE79 S3 SIL2 Technical Parameters

Brand: TRIPUS

Model: TP3251

TRIPUS built-in switch TP3251 TRIPUS TP3251 product introduction

Tripus is a leading manufacturer of complete switch plug combinations in the DIY and construction industries in Europe. With over 50 years of experience and enterprising employees, they ensure high quality and strong reliability. TRIPUS TP3251 is a built-in switch with undervoltage release, suitable for a wide range of applications such as motors, concrete mixers, drilling machines, etc. There is a compact small button version with a buckle frame cover 29 00x 52 40mm panel opening 46 5 x 22 1mm. There is a button version with screw installation, 2 mounting holes with a diameter of 4 2-42mm, and a panel opening of 46 5 x 22 1mm. There is also a joystick version with snap fastener frame cover 25x 48 mm panel opening 46 5x 22 1 mm. The optional external coil connection is turned off through limit switches, etc. It can still be mechanically opened without self holding.

TRIPUS built-in switch TP3251 TRIPUS TP3251 performance characteristics

reliability

TRIPUS built-in switch TP3251 TRIPUS TP3251 technical parameters

Origin: Germany

Whether to import: Yes

Application: Widely used

Packaging: Developed by the manufacturer

Performance: Good

Reliability: High

Can provide different rated operating voltages

voltage

frequency

230V

50Hz

230V

60Hz

120V

60Hz

115V

50Hz

115V

60Hz

breaking capacity

AC-1

16A

AC-3

14.5A

Brand: TRIPP LITE

Model: APSX1250

TRIPP LITE Inverter APSX1250 Product Introduction

The APSX1250 1250W APS X series 12V DC 230V AC inverter/charger is a reliable power source suitable for various devices ranging from power tools and pumps to portable lighting equipment and computer devices under heavy load conditions. It is a substitute for generator power without smoke, fuel, or excessive noise. DC-AC inverters have automatic line battery conversion switches and integrated charging systems that can be used as vehicle inverters, independent AC power sources, or extended operation UPS. During device startup or cycling, it can provide 1250W continuous power, 1875W for up to one hour, or 2500W peak power for up to 10 seconds. Automatic overload detectors, cooling fans, and resettable AC circuit breakers can protect equipment from damage.

TRIPP LITE inverter APSX1250 TRIPP LITE APSX1250 performance characteristics

Provide reliable power for mobile, emergency, and remote sites

Meet normal and peak power requirements

Optional remote control function

Durable polycarbonate shell

TRIPP LITE inverter APSX1250 Technical parameters

Brand: TRIPP LITE

Model: APSINT2424

TRIPP LITE Inverter APSINT2424 TRIPP LITE APSINT2424 Product Introduction

The APSINT2424 2400W APS INT series 24V DC 230V AC inverter/charger is a reliable power source suitable for various devices ranging from power tools and pumps to portable lighting equipment and computer devices under heavy load conditions. It is a substitute for generator power without smoke, fuel, or excessive noise. DC-AC inverters have automatic line battery conversion switches and integrated charging systems that can be used as vehicle inverters, independent AC power sources, or extended operation UPS. It provides 2400W continuous power, 3600W for up to one hour, or 4800W peak power for up to 10 seconds during device startup or cycling. Automatic overload detectors, cooling fans, and resettable AC circuit breakers can protect equipment from damage.

TRIPP LITE inverter APSINT2424 TRIPP LITE APSINT2424 performance characteristics

Provide reliable power for mobile, emergency, and remote sites

Meet normal and peak power requirements

Automatic transfer switch

3-level 30A battery charger

Optional remote control function

Durable polycarbonate shell

TRIPP LITE inverter APSINT2424 Technical parameters

Brand: TRIPP LITE

Model: U280-C02-S2

TRIPP LITE Car Charger U280-C02-S2 Product Introduction

The U280-C02-S2 dual port USB car charger allows you to quickly charge two USB powered mobile devices in your car simultaneously. You and your passengers can connect your phones simultaneously to ensure they are fully charged when you arrive at your destination. U280-C02-S2 is also recommended for tablets, MP3 players, and other USB devices with two 5V 2.4A USB ports. Whether your device is an Apple, Android, or other device, the auto sensing port will automatically adjust to the appropriate power level and platform. This ultra compact charger can be used with any standard 12V DC car power outlet.

TRIPP LITE Car Charger U280-C02-S2 Performance Features

Charge 2 mobile devices in your vehicle simultaneously

Each USB port supports up to 5V 2.4A

Automatically adjust the sensing port to the appropriate power level and platform (Apple, Android, etc.)

Suitable for any standard 12V DC car power socket

Brand: TRIPP LITE

Model: U280-C02-30W-K

TRIPP LITE Car Charger U280-C02-30W-K Product Introduction

This dual port USB car charger allows you to quickly charge two USB mobile devices simultaneously. You and your passengers can connect compatible devices such as smartphones, tablets, laptops, or power banks to ensure satisfactory battery life upon arrival at your destination. When used together, the USB-C and USB-A ports support up to 30W of charging power. The USB-C PD 3.0 port can support up to 18W (5V 3A or 9V 2A) to maintain the capacity of mobile devices. The USB-A port can support up to 12W (5V 2.4A) of power for reliable charging of smartphones and tablets. The compact charger can be connected to any standard 12V DC car power outlet, such as the power outlet on the dashboard. Simply plug it into and connect the device's USB data cable (or the included USB-C to Lightning data cable) to achieve fast and convenient mobile charging. An easily visible green LED indicates that the charger is powered on. U280-C02-30W-K is compatible with Apple (including iPhone), Android (including Samsung), Windows, and Amazon devices with USB-A, USB-C, or Thunderbolt 3 charging ports.

TRIPP LITE Car Charger U280-C02-30W-K TRIPP LITE U280-C02-30W-K Performance Features

USB car charger can charge 2 mobile devices in your car at the same time

Combining 30W of charging power to power your power consuming devices

Insert into the vehicle's 12V DC power socket