BT35 explosion-proof axial flow fan

BT35 explosion-proof axial flow fanProduct Features:

① More reasonable structure;

② The performance has been significantly improved, with a total pressure effectiveness of 89.5%;

③ The noise is lower, with a reduction of 3.6dB (A) compared to the A-level. The noise can be reduced by 30-40 dB. The explosion-proof axial fan is composed of explosion-proof motors, blades, ducts, and other components.

BT35 explosion-proof axial flow fanInstallation instructions:

1. Before installation, the fan should be carefully inspected for any damage or deformation. If there is any damage or deformation, it should be repaired properly before installation can proceed.

2. During installation, pay attention to checking whether the connecting parts are loose, and the gap between the blades and the air duct should be even and not collide.

3. The weight of the connecting air duct should not be borne by the air duct of the fan, and additional support brackets should be added during installation.

4. A collector must be installed at the air outlet of the fan, and it is recommended to install a protective net.

5. The fan base must be naturally connected to the foundation plane, and it is not allowed to forcefully connect the base by knocking it to prevent deformation. During installation, the base should be calibrated, iron pads should be added, and the basic horizontal position should be maintained. Then, the anchor bolts should be tightened.

6. After installation, it is necessary to conduct experiments and wait for normal operation before allowing formal use.

Technical Specifications

Explosion proof mark: Exd II BT4

Protection level: IP54

Anti corrosion grade: WF1

Rated voltage: AC220/380

Spindle speed: 960, 1450r/min or 2900r/min, customizable with the largest blade diameter of 1120mm.