Box type flushing test chamber

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product use: The box type flushing test box is suitable for external lighting and signal devices, as well as for protecting the outer shell of automotive lighting fixtures. It can provide realistic simulation of various environments that electronic products and their components may be subjected to during transportation and use, such as water and spray tests. To achieve the testing of waterproof performance of various products.

Product Details

Equipment model		Box size (D * W * H) mm	Dimensions (D * W * H) mm
LRHS-1000-JL		1000×1000×1000	1320×4500×2070

Technical Parameter

Sales Hotline: 021-608 99999

sexually ability finger treetop	Spray nozzle diameter	ø 6.3mm and ø 12.5mm
	Water spray pressure	30kpa and 100kpa (reference values, subject to flow rate reaching)
	working water jet capacity	12.5 ± 0.625L/min~75 ± 5L/min adjustable 20 ± 1L/min~120 ± 6L/min adjustable
	Test time	At least 3 minutes
send use material material	External material	High quality A3 steel plate electrostatic spraying
	Inner box material	Imported high-grade stainless steel SUS304
	Insulation material	Rigid polyurethane foam+glass fiber
	rotary table	The countertop is made of SUS304 stainless steel
	Other accessory materials	The parts that come into contact with water are made of stainless steel or copper materials
Safety protection		Automatic shutdown after testing timing, leakage protection, short circuit protection, and fault alarm
supply voltage		AC220V±10% 50Hz
Power		2.5kW
Usage environment		5℃～＋28℃ ≤85% RH
Note: 1. The above data were measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. We can customize non-standard laboratories according to specific user requirements 3. This technical information is subject to change without prior notice