-
E-mail
linpin@linpin.com
-
Phone
1580074900313818913497
-
Address
Linpin Industrial Park, No. 888 Zhangong Road, Linhai Industrial Zone, Fengxian District, Shanghai
Product Categories
Shanghai Linpin Instrument Co., Ltd
Salt spray cyclic corrosion test chamber
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Usage: The salt spray cyclic corrosion test chamber provides a more realistic simulation of the natural climate, where materials can withstand both dry and wet atmospheric exposure. Accelerating laboratory testing to simulate natural cyclic conditions is meaningful. Research has shown that in cyclic corrosion testing, the relative corrosion rate, structure, and morphology are more similar to those in outdoor conditions. Therefore, compared with conventional salt spray testing, cyclic testing usually has a stronger correlation with outdoor testing and can have
Product Details
| Equipment model | Studio size (D * W * H) mm | Dimensions (D * W * H) mm | |
| LRHS-108-RFHY | 450×600×400 | According to the three views of the contract | |
|---|---|---|---|
| LRHS-270-RFHY | 600×900×500 | ||
| LRHS-412-RFHY | 750×1100×500 | ||
| LRHS-663-RFHY | 850×1300×600 | ||
| LRHS-816-RFHY | 850×1600×600 | ||
| LRHS-1080-RFHY | 900×2000×600 | ||
Technical Parameter
Sales Hotline: 021-608 99999
| sexually ability finger treetop |
temperature range | 0℃～60℃ | |||||
| Humidity range | 30%～98% RH | ||||||
| Saturation bucket temperature | RT+10℃～70℃ | ||||||
| temperature uniformity | ≤ 2 ℃ (when unloaded) | ||||||
| temperature fluctuation | ± 0.5 ℃ (when unloaded) | ||||||
| Salt spray deposition amount | 1-2ml/80 cm ². h (16 hour average) | ||||||
| heating rate | 0.5℃～1.5℃/min | ||||||
| cooling rate | 0.5℃～1.0℃/min | ||||||
| Compressed air pressure | 2.00±0.01（kg/cm²） | ||||||
|---|---|---|---|---|---|---|---|
| spray mode | Continuous/Periodic Optional | ||||||
| Sample holder angle | Can meet 15 ° and 30 ° tilt tests | ||||||
| test method | NSS test AASS test CASS test | ||||||
| send use material material |
Cabinet material | PP reinforced hard plastic board or 316 stainless steel | |||||
| Box cover material | PP reinforced hard plastic board or 316 stainless steel | ||||||
| Air saturated bucket | Imported high-grade stainless steel SUS304 | ||||||
| Compressed air pipe material | High quality rubber tubing | ||||||
| Other pipelines | Thickened fluorosilicone rubber tube | ||||||
| pit the heart join in marriage place |
temperature controller | Imported "Youyi Control" brand temperature instrument | |||||
| Dehumidification and cooling | Single machine or double machine cascade refrigeration | ||||||
| compressor | Taikang, France | ||||||
| temperature sensor | PT100 platinum resistance thermometer | ||||||
| Heating pipe | Titanium alloy heating tube | ||||||
| Circuit breaker | Schneider miniature circuit breaker (prevents control circuit short circuit) | ||||||
| Standard configuration | V-shaped sample holder, round rod, nozzle, funnel, measuring cylinder, mist tube | ||||||
| Safety protection | Overtemperature, under phase/reverse phase of the whole machine, test timing, rapid defogging indication, test end Low water level protection, leakage, short circuit, compressor overpressure overload |
||||||
| supply voltage | AC380V±10% 50Hz | ||||||
| Power | 8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW | ||||||
| Usage environment | 5℃～＋28℃ ≤85％RH | ||||||
| Note: 1. The test data were measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. The above parameters are for reference only and can be customized according to the specific testing parameters of the user 3. This technical information is subject to change without prior notice |
|||||||
