Circuit breaker characteristic tester TPGKC-E, produced by Topu brand

Product Introduction of Circuit Breaker Dynamic Characteristics Tester
Yangzhou Top Electric Technology Co., Ltd. specializes in research and development, as well as productionCircuit breaker characteristic tester TPGKC-E, produced by Topu brandReferring to DL/T846.3-2004 "General Technical Conditions for High Voltage Testing Equipment" Part 3 of the power industry standard, the high-voltage switch comprehensive tester is designed based on this, providing convenience for dynamic analysis of various circuit breakers. It can accurately measure the mechanical dynamic characteristic parameters of low oil, high oil, vacuum, sulfur hexafluoride and other high-voltage circuit breakers of various voltage levels. It is also applicable for time testing of electromagnetic action electrical appliances such as contactors, relays, etc.

Main features of circuit breaker dynamic characteristic tester
1Chinese interface display of main data and operation commands

2Print data and waveforms on the data and curve screen in a time-sharing manner.

3Non test data not displayed (including data)0Not displayed)

4Short term data testing function for gold (in combination)000Valid by status!）

5Non moving rod measurement ratio is suitableV0TheV1TheV2TheV3TheV4Definition of various speeds .

6Test data can be stored and uploaded to a computer.

Test data of circuit breaker dynamic characteristic tester
1Time: Inherent opening (closing) time

Opening (closing) at different stages within the phase

Opening (closing) with different phases

Closing (opening) bounce time (number of bounces)

combine, synthesize-Time division (golden short time)

2Speed: Just open (just close) speed

Average speed during time period (travel or angle period)

Open (close) maximum speed

3Journey: Moving contact stroke (opening distance)

Contact stroke (insertion stroke)

Overstroke itinerary

Rebound stroke (amplitude)

4Operating current characteristics

5Low voltage operating characteristics

Note: Bounce frequency, overshoot stroke, and rebound stroke (amplitude) must be read on the waveform and can be printed out.

Technical specifications of circuit breaker dynamic characteristic tester
Environmental group: Belonging toGB6587.1-86The General Principles for Environmental Testing of Electronic Measuring InstrumentsIIIGroup Instrument（Can be used in outdoor environments）.

Type: Portable

Packaging: Aluminum alloy

Using power supply:

Voltage: AC220V ± 10%

Frequency: 50Hz ± 5%

Environmental requirements for use

Environmental temperature: -10 ℃~40℃

Relative humidity:<80%

safety performance

Insulation resistance:>2MΩ

Leakage current:<3.5mA

Dielectric strength: The power supply incoming line can withstand the shell1500V（50HzEffective Value1Minute withstand voltage

Time testing

Test range: 0.1ms to 997ms

Accuracy: ± (0.1% reading+2 words)

Graphic display:13Road ≮0.1msAll jumps

speed test

Speed measurement range:1mmsensor 0.01～25.00m/s，

0.1mmsensor 0.001～2.50m/s

1° angle sensor 1Zhou Bo/ 1°

Accuracy: 1mmsensor ± (1% reading+1 word)

0.1mmsensor ± (2% reading+1 word)

1° angle sensor ± (1% reading+1 word)

Itinerary test

Test scope:1mmsensor 0～750mm

0.1mmsensor 0.1～30mm

1° angle sensor 0～360°

Accuracy: ± (1% reading+1 word)

Graphic display:S-tCurves and each1mmor0.1mmor1The numerical value of displacement (rotation angle) in degrees

Current characteristic test

Test range: 40mA~10A

Accuracy: ± (1% reading+40mA)

Graphic display: I-t curve and parameter values at each point (I, t) on the curve

DC power supply

Output voltage: 30-250V continuously adjustable

Output current: ≤15A

Load change rate: ≤5%

Resolution: 40mA

Circuit breaker characteristic tester TPGKC-E, produced by Topu brandmanufacturerFriendly reminder: When purchasing instruments, choose products from direct manufacturers, as product quality and after-sales service are guaranteed!

Top Electric's main products:
Variable frequency series resonance test device, DC high voltage generator, SF6 micro water meter, SF6 gas leak detector, SF6 gas purity tester SF6 density relay calibrator, test transformer, ultra-low frequency high voltage generator, cable fault tester, DC resistance tester, transformer ratio group tester, microcomputer relay protection tester, high voltage switch mechanical characteristic tester, insulation oil dielectric strength tester (insulation oil withstand voltage tester), frequency conversion anti-interference dielectric loss tester, fully automatic capacitance and inductance tester, circuit resistance tester (contact resistance tester), high current generator (current converter), grounding resistance tester, insulation resistance tester (megohmmeter), zinc oxide lightning arrester tester, transformer characteristic tester, insulation boot and glove withstand voltage tester, power safety tool mechanical performance tester (electronic force tester), wireless high voltage nuclear tester Phase meter, transformer capacity characteristic tester Transformer on load tap changer tester, transformer winding deformation tester, transformer characteristic comprehensive testing bench, lightning counter calibrator, vacuum degree tester, vacuum oil filter, solar photovoltaic junction box tester, electric heating appliances, insulation products, sliding wire guide rail bridge, etc.

Yangzhou Top Electric Technology Co., Ltd
Address: No.2 Guotai Road, Baoying Economic Development Zone, Jiangsu Province