-
Phone
13813156012
-
Address
Zhenxing North Road, Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province
Product Categories
- Density meter
- melt indexer
- Elasticity meter
- Digital tensile machine
- compression set
- mould
- Thickness gauge
- Low temperature brittleness tester
- Computer tensile machine
- Planing machine
- Plasticity testing machine
- Notch prototype
- Fatigue cracking testing machine
- Cutting knife
- Insulation resistance meter
- Compression stress relaxation instrument
- Mooney Viscometer
- Dumbbell prototype
- Roller Wear Machine
- Akron abrasion machine
- Hot deformation Vicat
- Rubber cutting machine
- Special film paper for vulcanizing tester Menni
- Double head slicer
- impact testing machine
- Tensile testing machine
- Hardness tester
- Vulcanizer, Rotorless Vulcanizer, Rheometer, Rotorless Rheometer
- Aging chamber, ozone aging chamber
Yangzhou Zhengyi Experimental Machinery Co., Ltd
Circular cutting knife
NegotiableUpdate on 04/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Circular cutting knife
Product Details
There are other specifications of cutting knives available for purchase:
1. 2 * 35 rubber dumbbell cutter
2. 3 * 100 plastic film and pipe dumbbell cutter
3. 4 * 75 rubber and cable dumbbell cutter
4. 4 * 50 rubber and cable dumbbell cutter
5. 5 * 56 dumbbell cutter
6. 5 * 100 dumbbell cutter
7. 6 * 115 rubber and plastic dumbbell cutter
8. 10 * 100 dumbbell cutter
9. 10 * 120 plastic film dumbbell cutter
10. 15 * 150 straight blade
11. 13 * 152 porous material dumbbell cutter
12. Right angle tearing cutter
13. Pant cutting knife
14. Crescent shaped cutting knife
15. Circular cutting knife
There are also special requirements for cutting knives that can be customized in size
For blade maintenance:
The cutting edge of the cutting blade should be regularly maintained and serviced, as blunting, chipping, or curling of the edge can cause defects in the specimen and affect the test results. When the cutting blade is not in use, the cutting edge should be placed on a soft sponge or kept out of contact with the surface.
The cutting blade should be stored in a dry environment and coated with protective oil to prevent corrosion.
When using, the cutting edge should be protected by placing a suitable soft and hard tape or high-quality cardboard underneath the sample to protect the cutting edge from damage. The cutting edge should be regularly adjustedGrind to maintain sharpness.
Note: Maintenance of the cutting edge is important. The cutting edge can be lightly ground and trimmed with a grinding stone, and the condition of the cutting edge can be evaluated by testing the fracture point of the sample after a series of experiments. When removing the fractured specimen from the clamp of the testing machine, check whether there is a tendency for the specimen to fracture at or near the same point. If there is such a tendency, it indicates that the cutting edge may become dull, have a notch, or curl at this specific location.
Cutting lubrication:
Lubricate the cutting blade or sample surface with diluted detergent, and pay attention to wiping the metal surface dry after using the lubricant to prevent rusting of the cutting edge.
