Clutch torque testing machine, SGDN-10 machine for measuring torque

Clutch torque testing machine, SGDN-10 machine for measuring torque

Produced by Henggang manufacturerClutch torque testing machineAlso known asAlso known as motor dynamic torque tester, rotary torque tester, etc；Clutch torque testing machineCan be used for testing the output torque and power of tractors, automobiles, airplanes, various ships, mining machinery, sewage treatment systems, industrial and process industries, and various rotating power equipment.

Picture of clutch torque testing machine

Specification and model of clutch torque testing machine

Clutch torque testing machineFeatures:

1. The square wave amplitude of the signal output waveform can be selected from 5V/12V.

2. Power on to enter the working state, no preheating process is required.

3. High detection accuracy, good stability, and strong anti-interference ability.

4. Can be installed in any position and direction.

5. Continuous measurement of positive and negative without repeated zeroing

torque.

6. Non contact transmission of energy and signals, regardless of rotation, speed, and direction when transmitting signals.

7. Prohibition can be transmitted

torqueSignal, rotationtorqueSignal, dynamicstorqueSignal, statictorqueSignal.

8. The sensor can be used independently of the secondary instrument, and can output impedance as long as power is supplied as needed

torqueProportional square wave or pulse wave frequency signal; Or voltage and current signals.

Due to the induction power supply of transformers and the absence of worn parts such as collector rings, they can work at high speeds for a long time and are widely used in motors, generators, reducers, and diesel engines

torquemonitor.

Clutch torque testing machineMain functions:

Can detect the torque, speed, and power output of power machinery. Such as electric motors, internal combustion engines, hydraulic (pneumatic) motors, traction machines, oil drilling rigs, etc.

Can detect the input and output torque, speed, power, and efficiency of transmission machinery. Such as reducing transmission, electric valves, clutches, etc.

Can detect the tolerable torque of steel transmission components. Such as oil drilling rig drill rods, coal mine mountain fixed anchor rods, etc.

Can detect the braking torque of braking machinery. Such as brakes, power loss protectors, automotive eddy current reducers, crane reducers, brakes, etc.

Can detect the torque and power required for rotating working machinery. Such as generators, water pumps, fans, mixers, etc. Can detect the frictional torque of motion. Such as car transmission ball head and ball head seat, ship tail shaft and tail shaft sleeve, ball screw and nut, etc.

Clutch torque testing machineTransportation, installation, use and operation:

The equipment is strictly prohibited from being exposed to rain, inverted, or impacted during transportation. During the transportation, installation, and use of equipment, it is strictly prohibited to lift, pull, press, pry, or impact sensors. The equipment should be installed in a dry and ventilated factory without the presence of corrosive gases. The equipment should be installed firmly and have reliable grounding. The main shaft of the equipment cannot withstand radial forces, and the coaxiality requirement error should not exceed 0.05mm. Flexible couplings with compensating clearances should be used. Equipment dedicated power supply to prevent interference. There must be no strong magnetic field interference sources around the equipment. The equipment shall be set with instrument parameters and operated by the operator according to the classification manual. Non personnel are not allowed to operate it. The precision of the equipment has been calibrated before leaving the factory. Non personnel are not allowed to adjust the calibration accuracy buttons and knobs, otherwise it will cause precision deviation and need to be recalibrated.

Clutch torque testing machineThe ambient temperature shall not exceed 40 ℃. The altitude shall not exceed 2500m. When the ambient temperature is 20 ℃, the relative humidity shall not exceed 85%.

Clutch torque testing machineApplication scenarios

User requirements and suggestions

As a user of Shanghai Henggang Instrument Co., Ltd., we appreciate your trust in our company. If you have any suggestions or requirements for our products, please inform us in a timely manner. At the same time, regular maintenance should be carried out according to the user manuals and maintenance manuals of various products of the company. If the instrument malfunctions, please notify our maintenance personnel in a timely manner to detect and handle it in a timely manner, and keep daily records of the equipment operation station. We believe that through communication and cooperation between both parties, the equipment will be well maintained.

Our company also has other products:spring dynamometer Construction site electric wrench Micro pressure gauge Tester for measuring wrench torque Hand pushed dial tensile tester Button tensile testerVarious specifications and models of torque wrenches Install electric torque wrench Digital dynamometer CHATILLON Push Force Scale Pressure gauge Portable push-pull force gauge Electronic tensile tester Remote controlled tensile tester Instrument for measuring tensile strength Reinforcement tightening digital torque wrench Construction site electric wrench Digital force gauge Large scale push-pull force gauge Digital tension gauge High precision digital torque wrench Terminal tensile tester

Clutch torque testing machine, SGDN-10 machine for measuring torque