Efron Encoder Transmission Equipment from the United States

Efron Encoder Transmission Equipment from the United States

Efron Encoder Transmission Equipment from the United States

Brand Introduction

Founded in 1953 and located in Cleveland, Ohio, USA, Efron is a professional manufacturer of transmission equipment.

With over 40 years of research and manufacturing history in the field of heavy-duty encoders, we are a major global manufacturer and supplier of highly reliable heavy-duty encoders.

Its products have high reliability and durability, and are widely used in heavy-duty machinery industries with harsh working conditions such as metallurgy, lifting, ports, wind power, mining, petroleum machinery, papermaking, etc.

Product Model

HS6AS1R23FE2A000

HS35MYX6WPU0GA00

HS6AS1P23FU2X000

HS 25 are 1 qwe 0 AA 000

HS 35 is 1 SWU 0 AA 000

Avtron AFS-110-4LND-C Encoder

Working power supply: Voltage: 10-30 VDC

Current: 230mA at 10V, 100mA at 24V*

Output format: Ethernet/ IP*、Modbus TCP*、Profinet*、Powerlink、Profibus、CANOpen、DeviceNet、SSI、 parallel

Accuracy:+/-0.02 ° (+/-1 arc min)

Axial load: 9lbs [40N] in the axial direction, 25lbs [110N] in the radial direction

Temperature: -40 ° C to 85 ° C*

Environment: IP66**

Vibration: 10G, 10-1000Hz

Impact: 30G, 11mS duration*

Weight: 1.21lb [550g]; Stainless steel option 2.7lb [1200g]

The shaft plug used by HS25A encoder can easily install shafts ranging from 3/8 'to 3/4'; The size of the device can be adjusted by replacing or removing plugins, enabling our factories, distributors, and customer warehouses to quickly meet any needs. The shaft plug (3/8 'to 5/8') [6 to 16mm] also provides isolation from the motor shaft current, while allowing the housing to be grounded to meet NEC requirements.

Avtron encoders have shaft seals and bearings that can be kept sealed by temperature cycling and liquid spray to prevent contaminants from entering. Our encoder seals are protected by mechanical barriers to prevent bending or failure, while Avtron bearings use synthetic lubricants with a lifespan of * * *.

Many competitive optical encoder designs have the risk of damaging the sensor due to vibration or impact: the sensor is less than four thousandths of an inch away from a thin and typically flexible optical disc rotating at full motor speed. Some designs even use thin glass plates in "industrial" products! Avtron only uses unbreakable disks and a sensor to disk gap that is 8 times larger than its competitors.

Our optical HS25A encoder utilizes sensors, disks, bearings, and sealing technology to provide performance under industrial conditions. Choose Avtron HS25A now!

The AVTRON encoder in the United States is generally divided into incremental and type encoders, which have the biggest difference: in the case of incremental encoders, the position is determined by the number of pulses calculated from the zero mark, while the position of type encoders is determined by the reading of the output code. In a circle, the reading of the output code for each position is *; Therefore, when the power is disconnected, the encoder does not separate from its actual position. If the power is turned on again, the position reading will still be current,; Unlike incremental encoders, it is not necessary to search for zero marks.

The manufacturer of AVTRON encoders in the United States produces a wide range of series, generally including elevator encoders, machine encoders, servo motor encoders, etc. The encoders are all intelligent and have various parallel interfaces for communication with other devices.

The AVTRON encoder from the United States is a device that converts angular or linear displacement into electrical signals. The former becomes a code wheel, while the latter is called a code ruler. According to the reading method, encoders can be divided into two types: contact type and non-contact type. Contact type uses electric brush output, where one electric brush contacts the conductive or insulating area to indicate whether the code state is "1" or "0"; The non-contact receiving sensitive element is a photosensitive element or a magnetic sensitive element. When using a photosensitive element, the state of the code is represented by a transparent area and a non transparent area to indicate whether it is "1" or "0".

AFS32-360-4BNO-C

M4-4S1XH51ZP000

AVCP2E

AVST-1700A

HS35A YICDUIEA000 2962 G MODEL

M3-4T3R1024W

M3-4T3D1024W

ASSY. A19722.12EV. G

ASSY. A18876-1.REV.V

ASSY. A18639-1.REV.F

ASSY. A18123-1.REV.M

ADD32 C24089-04

AV25Y1CWA2XAA

M3-7SIR1024P004

M64S1H51ZW000

DC0180-4EN0-C2942?

M6-4S1H51ZT

The supplier cannot identify the AVTRON 5S3XH51-TOO3 12-24VDC model and needs to provide more detailed information or nameplate images

AVTRON AVTRON AFS280-4LNO-C

AVTRON AVTRON AFS360-4LNO-C

AVTRON AV115 1BAE05XP008

AVTRON AV115 1BAE84XP046

AVTRON AVTRON AV11AS2C23FA2A000 supplier unwilling to supply

AVTRON AVTRON AV11AS2CX3FA2A000 supplier unwilling to supply

The AVTRON AV56A1CBE8YXP000 model should be AV56A1CEE8YXP000

AVTRON AV56A1CEE8YXP000