-
E-mail
2336539452@qq.com
-
Phone
15221225095
-
Address
Huangdu Industrial Park, Jiading District, Shanghai
Product Categories
Shanghai Shuangjia Valve Co., Ltd
Electric sleeve temperature regulating valve
NegotiableUpdate on 02/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Shuangjia valve electric sleeve temperature regulating valve receives DC current signals from the regulating instrument, changes the flow rate of the regulated medium, and maintains the controlled process parameters at the given values. Widely used in the production automation control of industrial sectors such as power, metallurgy, chemical, petroleum, textile, pharmaceutical, papermaking, etc.
Product Details
Shuangjia ValveElectric sleeve temperature regulating valveThe nominal diameter ranges from 20 to 200mm, with nominal pressures of 1.0, 1.6, 4.0, and 6.4MPa. The operating temperature range is from -40 ℃ to 450 ℃, and the received signal is 0~10mA.DC or 4~20mA.DC. The electric single seat temperature regulating valve is suitable for situations with small pressure difference, high medium viscosity, or slight particle impurities. Electric sleeve temperature regulating valve is suitable for situations with large pressure difference. According to the material of the sealing part of the valve, there are two types: metal metal and non-metal metal seals. The latter can achieve a leakage rate of VI level (zero leakage) when the valve is closed. According to the different packing materials, it can be divided into two types: general packing seal and corrugated pipe seal. The former is used in general occasions, while the latter is used in important occasions where leakage is not allowed. The flow characteristics are linear or equal percentage. The electric flow temperature control valve can be divided into two types of actuators: ordinary type and electronic type. A variety of varieties and scales are available for selection.
Technical Specifications
Nominal Diameter(DN) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
Valve seat diameter(dn) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
Rated flow coefficient(KV) |
straight line |
6.9 |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
630 |
875 |
1250 |
Wait for percentage |
6.3 |
10 |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
360 |
570 |
850 |
1180 |
|
Allow pressure difference(MPa) |
3.2 |
3.0 |
2.0 |
1.8 |
1.5 |
1.4 |
1.0 |
0,7 |
0.6 |
0.5 |
0.3 |
0.2 |
0.1 |
|
Nominal Pressure(MPa) |
1.6、2.5、4.0、6.4、10.0 |
|||||||||||||
rated stroke(mm) |
16 |
25 |
40 |
60 |
100 |
|||||||||
Valve cover form |
standard form(-17～+250℃)High temperature type(+250～+450℃)Low temperature type(-40～-196℃)Bellows sealed type(-40～+350℃) |
|||||||||||||
Cover form |
Bolt compression type |
|||||||||||||
sealing packing |
VType PTFE packingVFlexible graphite packing material |
|||||||||||||
Valve core form |
Single seat plunger type valve core |
|||||||||||||
flow characteristics |
Linearity, equal percentage |
|||||||||||||
Configure actuator category |
381LSeries electric actuatorsPSLSeries electric actuators |
|||||||||||||
Actuator parameters |
Power supply voltage:220V/50HzInput signal:4-20mAor1-5V·DCOutput signal:4-20mA·DC |
|||||||||||||
Protection level: equivalentIP55Explosion proof signs:ExdⅡBT4(ExdⅡBT6Special Customization)Hand operated function: joystick | ||||||||||||||
Ambient temperature-25～+70℃Environmental humidity:≤95% | ||||||||||||||
Shuangjia ValveElectric sleeve temperature regulating valveperformance metrics
project |
indicator value |
||
basic error% |
match3810L±2.5; MatchingPSL±1.0 |
||
backlash% |
match381L ±2.0; MatchingPSL±1.0 |
||
dead zone% |
1.0 |
||
Always point deviation% |
Electric opening |
Starting point±2.5 |
destination±2.5 |
Starting point±2.5 |
destination±2.5 |
||
Electricity off |
Starting point |
±2.5 |
|
destination |
±2.5 |
||
Rated travel deviation% |
≤2.5 |
||
Leakage amountL/h |
0.01%×Rated capacity of valve |
||
adjustable rangeR |
30：1 |
||
structural diagram
