Environmentally friendly B1 grade rubber special adhesive, rubber insulation construction adhesive

Environmentally friendly B1 grade rubber special adhesive, rubber insulation construction adhesiveThe importance in construction mainly lies in the fact that after cutting the boards, we will wrap and bond them according to different cutting shapes to ensure the tightness of the entire system, thereby ensuring the insulation of the entire system.

Describe the correct use of insulation glue:Environmentally friendly B1 grade rubber special adhesive, rubber insulation construction adhesive

1Shake the container before use to make the glue evenly distributed. During actual installation, use a small can of glue to prevent it from evaporating too quickly. If necessary, use a large can Pour it into a small jar for use, and seal the jar mouth when not in use.

2Use a short and hard brush.

3Apply a thin and uniform layer of specialized adhesive to the bonding surfaces at both ends of the material.

Advantages of our company's rubber insulation adhesive:

4The natural drying time of specialized adhesive is about 2 minutes, and the length of time depends on the grade of the adhesive, the temperature and humidity of the atmosphere. The exposure time exceedsInvalid after 20 minutes.
5When using, wait for the glue to dry naturally. The correct method for measuring dryness is the "finger touch method". Use your fingers to touch the adhesive surface. If your fingers do not stick to the material surface If there is no sticky feeling on the surface of the material, it can be bonded.
6When bonding, simply align and grip the two surfaces of the adhesive interface for a while.
7If the placement time is too long and the two joint surfaces do not have adhesion when pressed together, please repeat steps 2-6.
8Normally, each kilogram of rubber adhesive can be applied to two square meters of bonding surface.

Characteristics of our company's rubber insulation adhesive:

9Usually, specialized adhesives cannot be used below 5 ℃. When working in an environment between 5 ℃ and 10 ℃, please place the adhesive indoors at a temperature of 20 ℃, Remove when needed.
10When connecting two materials under pressure, there is no need to wait for the glue to dry. The wet bonding method is used, and the materials are first placed at the installation site Apply glue to the interface, adjust the position of the two materials correctly, and soon they will bond firmly according to the position you designed.
11Check whether the insulation glue and the anti rust paint protecting the iron pipe are firmly bonded.