Facial temperature measurement access control all-in-one machine - touch version

Facial temperature measurement and access control all-in-one machine - Touch version $nDS-K1T6QT-F70-3XFTB is a facial access control all-in-one machine that integrates facial detection and thermal imaging temperature measurement. In order to improve the accuracy of temperature measurement, it combines facial recognition algorithm and temperature measurement technology to measure the facial area and avoid errors caused by temperature measurement of other parts of the human body. Through facial information and temperature comparison, it can achieve dual control of entry and exit personnel. It can be widely used in hospitals, stations, parks, venues, factories and other scenarios to achieve personnel permission management and temperature monitoring, effectively meeting the requirements of epidemic prevention and control.

　　Facial temperature measurement access control all-in-one machine - touch version

Adopting a 7-inch touch screen with a 16:9 aspect ratio and a screen resolution of 600 * 1024

Equipped with a 2 million wide dynamic camera, facial recognition distance of 0.3m~2m, suitable for a height range of 1.4m~1.9m. Support comparison between outdoor backlighting and low light environments, and also have photo and video anti-counterfeiting functions

The device adopts a non-contact temperature detection module, with a temperature detection distance between 0.3m~2m, a temperature measurement range of 30 ℃ -45 ℃, and a detection accuracy of ± 0.5 ℃ (without blackbody);

Adopting deep learning algorithms, supporting a face capacity of 5000. Fast recognition speed and higher accuracy.

Supports multiple authentication methods, including facial recognition or card swiping, facial recognition+card swiping, etc. The facial comparison time is less than 0.3 seconds per person, and the facial verification accuracy is ≥ 99%.

The device supports two working modes: face permission verification+face temperature measurement mode, and fast temperature measurement mode (face detection+face temperature measurement);

Support configuration of facial permission verification+facial temperature measurement mode (supporting multiple verification methods such as card swiping+facial temperature measurement, facial recognition+facial temperature measurement, card swiping+facial+facial temperature measurement, etc.), that is, after verifying the identity of the person, perform facial temperature detection and bind the person's information and temperature data uniformly (temperature measurement can also be performed if identity verification fails);

Support configuring fast temperature measurement mode (face detection+face temperature measurement), which means that when a face is detected (without permission verification), facial temperature detection will be performed and facial photos will be captured;

Support displaying body temperature detection results on the device screen and outputting real-time voice alarms for abnormal body temperature;

The device supports mouth detection mode, which can be configured with reminder mouth detection mode and forced mouth detection mode; Reminder for wearing mouth zh mode: If the mouth zh is not worn, it can be used for identity verification and normal check-in. After passing the identity verification, a voice prompt will be sent to the mouth zh for wearing; Forced wearing mouth zh mode: Without mouth zh, identity verification cannot be done, voice prompts to wear mouth zh

Supports TCP/IP network communication for networked operation or standalone operation in disconnected mode.

Real time uploading of device comparison results and linked captured photos to the platform for storage or issuing card and face data from the platform to the device through TCP/IP protocol. Link to capture photos and save the captured images.

Connect one card reader or access control host externally through the RS-485 interface.

By connecting to the security door control module through the RS-485 interface, the security door control module can be connected to the electronic control lock. In the event of malicious damage to the host, the door will not be opened. External access control host or Wiegand card reader through Wiegand interface.

　　Facial temperature measurement access control all-in-one machine - touch version

Model DS-K1T6QT-F70-3XFTB

Embedded Linux Operating System

Display screen size: 7-inch touch screen

Resolution: 1024 * 600 card type 13.56MHz, Mifare, CPU serial number

Face recognition verification time 1: N face comparison time ≤ 0.3S/human face verification accuracy ≥ 99%

Facial recognition distance 0.3m-2m

Face capacity of 5000, storage capacity of 50000 cards, 100000 event records

Communication method: 10/100/1000Mbps adaptive network port

Physical interface RS485 * 1, Wiegand * 1 (supports bidirectional) USB*1、 Electric lock * 1, door magnet * 1, door opening button * 1

Camera with 2 million pixels, wide dynamic range, supporting backlit environment

Sensor type Vanadium oxide (VOx) microcalorimeter

Temperature measurement range: 30 ℃ to+45 ℃

Temperature measurement distance 0.3-2m

Temperature measurement accuracy ± 0.5 ℃ (without blackbody)

Device power supply DC 12V/2A (without power supply, centralized power supply)

Relative humidity 0% to 90% (in non condensing water droplet state)

Working temperature: 0 ℃~+50 ℃

Indoor environment with no wind

Installation method: open installation, 86 bottom box installation

Dimensions (length * width) 239mm * 116.5mm * 33mm (excluding temperature measuring components)