IHG stainless steel pipeline chemical pump

IHG stainless steel pipeline chemical pumpProduct Overview:

The IHG series stainless steel single-stage single suction vertical pipeline chemical pump is directly connected to the motor and pump, and the shaft seal adopts a hard alloy mechanical seal. The pump adopts a pipeline structure, and the inlet and outlet of the pump can be installed in the pipeline like valves

IHG stainless steel pipeline chemical pump product features:

1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same line. It can be installed in the pipeline like a valve, and can be used outdoors with a protective cover.

2. The impeller is directly installed on the long axis of the motor, with a short axial dimension. The pump and motor bearings are configured reasonably, which can balance the radial and axial loads generated by the pump operation,.

3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals.

4. Easy installation and maintenance, no need to disassemble the pipeline system, simply remove the pump coupling nut to extract the rotor components.

5. Pumps can be operated in series or parallel according to the requirements of flow rate and head.

6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

IHG stainless steel pipeline chemical pumpMain purpose:

IHG type verticalpipeline pumpIt is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from 20 ℃ to+120 ℃.

IHG stainless steel pipeline chemical pumpWorking conditions:

1. The suction pressure is ≤ 1.0MPa, or the working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa. The static pressure test pressure of the pump is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.

Note: If the medium used is with small particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.

IHG stainless steel pipeline chemical pumpModel meaning:

Structural description of IHG stainless steel pipeline chemical pump:

IHG stainless steel pipeline chemical pump connection method:

Installation method of IHG stainless steel pipeline chemical pump:

Performance parameters of IHG stainless steel pipeline chemical pump: