Iron triangle heart-shaped directional headband clip on microphone ATM735

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Iron Triangle heart-shaped directional headband clip on microphone ATM73a is designed specifically for audio reception in film and television production and broadcasting interviews (ENG/EFP). The length of the super directional condenser microphone can be used for electronic news gathering, outdoor recording, and other special needs. Provide narrow angle super directional performance and provide long-distance sound reception effect. There is better noise resistance from both sides of the microphone to the back. Equipped with a high pass filter switch. It can work with battery or phantom power supply.

Product Details

Iron Triangle Heart Directional Headclip Microphone ATM73a Product Introduction

Iron triangle heart-shaped directional headband clip on microphone ATM735

Specially designed to provide hands-free voice recording for drummers, keyboardists, and other musicians.
Provide comfortable and inconspicuous design, as well as close range sound reception.
Configure a box type power supply module that can be operated using batteries or phantom power.
Heart shaped directional sound collection can effectively reduce noise interference from nearby and behind.
There areATM73cWThe model does not have a power supply module, with a 1.4m long connection, specifically designed for the UniPak iron triangle? Wireless system usage.

Technical specifications of the Iron Triangle heart-shaped directional headband clip on microphone ATM735

SPECIFICATIONS: >

component	Fixed charging backplate, electrostatic capacitive type
directivity	heart-shaped directivity
frequency response	40 15,000 Hz
high-pass filtering	80 Hz, 18 dB/octave
Open Circuit Sensitivity	Phantom power supply: 55 dB (1.7 mV) at 1V to 1 Pa Battery: 56 dB (1.5 mV) at 1V to 1 Pa
impedance	Phantom power supply: 200 ohms Battery: 270 ohms
High input sound pressure level	Phantom power supply: 146 dB, 1 kHz at high sound pressure Battery: 132 dB, 1 kHz at high sound pressure
Dynamic range (typical values)	Phantom power supply: 111 dB, 1 kHz at high sound pressure Battery: 97 dB, 1 kHz at high sound pressure
signal-to-noise ratio	59 dB, 1 kHz 于 1 Pa
phantom power	DC 11 52V, power consumption 2 mA typical
battery	1.5V AA Type 5 Battery
Battery consumption/lifespan	0.4 mA/1200 hours (alkaline battery)
switch	Turn off, turn on flat, turn on high pass filtering
weight	Microphone: 60g; Power supply module: 139 grams
size	Headband: 120.0 mm width, 80.5 mm microphone rod microphone: 20.4 mm diameter power module: 84.0 (height) x 63.0 (width) x 22.0 (thickness) mm
output terminal	Built in three pin XLRM card male head
conductor	1.4 m long, 2.8 mm diameter, microphone fixed connection, with TA3F shielded connector at one end.
standard configuration	AT8531 power supply module; AT8439 clip; AT8139L large windproof cotton; AT8139S small windproof cotton; battery

Iron triangle heart-shaped directional headband clip on microphone ATM735