JGZP cable marking machine dial (roller type)

The cable marking machine dial is used to match the JGYH-B cable marking machine produced by our company. It is made of steel alloy and has the advantages of being sturdy, durable, not easy to wear, and has fast thermal conductivity. It is suitable for marking cables ranging from 4mm ² to 185mm ². The main numbers are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 M、X、 A series of numbers and letters such as+, -, #, etc. can also be customized with various symbols and characters according to customer requirements.

Cables need to be repaired and identified. Marking and numbering cables is a good method for cable identification. The crimping machine is suitable for cable repair,4mm2—185mm2The main font sizes used for cable voltage numbering are:0、1、2、3、4、5、6、7、8、9TheMTheX、+This product is composed of a series of numbers and letters such as, -, #, etc., which can be reused freely. It has a long service life, is not easily damaged, has a simple and reliable structure, and is easy to operate.

JGZP cable marking machine dial (roller type)product structure

1This product uses fully automatic temperature control, with short time and fast heating, and the situation is stable throughout the ship20Can be achieved within minutes150℃。

2The product code is aluminum disc, with a long lifespan, not easily damaged, and can be used freely.

3Temperature control, when you set the appropriate temperature, can be self controlled.

4This product is not explosion-proof and is not suitable for underground operations.
This machine does not require pulling cables indoors, does not require lead marking, and does not require a heat exchanger. Regardless of where the wires are located, they can be found at both ends in the warehouse, on the mining truck, or in the yard. Regardless of the number or length, the task can be completed in one go. This machine is labor-saving, time-saving, and automatic, making it an ideal equipment for cable management.

JGZP cable marking machine dial (roller type)Instructions for Use

1Firstly, connect the power supply, which must be grounded with a voltage of220V.

2Select and place the required numbers, turn on the switch (circuit breaker), and set the temperature150℃-160Between ℃.

3When the temperature control reaches, place the cable on top,15Just take it out in minutes, don't take too long as it will affect the quality of the cable.

Main technical parameters

This product is divided into two types

1Roller type

voltage220Vpower4KW

Character plate16only warm-up time30minute

Pressure range length225mm

2Block style, divided into two categories

① Pressure range length230mm

voltage220Vpower1.4KW

Character code32only warm-up time10minute

The above products are all internally heated, energy-saving.