JN-H63 (Fanuc 0i-MF system belt drive 6000rpm) horizontal machining center

4、 Mechanical indicators of machine tools

1Machine tool structure

The main basic components of the machine tool are made of high tensile strength cast iron, which is structurally optimized and has high static stiffness.

The spindle has highrigidStructure, high mechanical efficiency, capable of high-precision heavy cutting machining.

The spindle motor adopts AC servo technology, which can achieve continuously variable forward and reverse rotation

The three-axis ball screw adopts a pre stretched structure, which gives the three-axis good dynamic stiffness and resistance to thermal deformation

The three-axis adopts high-precision grade heavy-duty linear sliding rails from Taiwan, suitable for high-speed cutting, with strong rigidity and high efficiency

Three axis ball screw and drive servo motor are directly transmitted, with no cumulative transmission error and high repeatability and positioning accuracy

Automatic tool changing structure, quick tool changing, smooth action

All components and various measurement units of the machine tool comply with the International Organization of Units (ISO) standard

2Machine tool protection

Machine tool protective devices are safe, complete, and reliable

Machine noise: meets national standards, 75db

The electrical control cabinet is sealed, dustproof and waterproof, with a rating of IP65

3Lubrication system

Using TZ electric lubrication device, quantitatively inject lubrication for each sliding surface and ball screw

The interval and amount of oil injection can be adjusted to ensure that each lubrication point is properly lubricated ... oil injection

When the oil level is too low (oil shortage), the bed display will sound an alarm

Lubricating oil selected is 68 # guide rail lubricating oil

Lubrication box capacity4rise

Lubrication pump voltage220VMotor output power25W，. Great pressure2.5MpaDischarge flow rate110Ml/min

4Cooling system

Cooling system capacity 240L

Stahl cooling pump, motor powerP1：1270W、P2：1030W, traffic5 m3/h，Hmax：48m

Cutting cooling is achieved by spraying coolant with a universal nozzle

5Pneumatic system

The pneumatic system is equipped with a three-point combination, pressure switch, solenoid valve, etc., to achieve pneumatic tool changing, spindle blowing, pressure 6-8KG/C ㎡, flow rate 220L/MIN, external air gun, which can clean the working area

6Electrical system

The standard system has complete and reliable interlocking, safety protection, and fault self diagnosis alarm functions

Equipped with RS232 standard communication interface, it can store programs on computer floppy disks

(Corresponding software can be provided according to user requirements)

Other systems can be selected according to user requirements