JN-IV850 (Fanuc 0I-MF (5 packs) system belt type 8000rpm)

JN-IV850 (Fanuc 0I-MF (5 packs) system belt type 8000rpm)

vertical machining center

JN-IV850Technical Parameter

Main Configuration Details Table

Mechanical indicators of machine tools

1Machine tool structure

The main basic components of the machine tool are made of high tensile strength cast iron, which is structurally optimized and has high static stiffness.

The spindle has a high rigidity structure and high mechanical efficiency.

The spindle motor adopts AC servo technology, which can achieve continuously variable forward and reverse rotation

The three-axis screw adopts a ball nut pair structure, which enables the three-axis to have good dynamic stiffness and resistance to thermal deformation

The three-axis adopts Taiwan's high-precision grade heavy-duty linear sliding rail, suitable for high-speed cutting, with strong rigidity and high efficiency

Three axis ball screw and direct drive servo motor transmission,No cumulative transmission error,High repeatability and positioning accuracy

Automatic tool changing structure,Quickly change the knife,Smooth movement

All components and various measurement units of the machine tool comply with international units of measurement(ISO)standard

2Machine tool protection

Machine tool protective devices are safe, complete, and reliable

Machine noise: meets national standards,75db

Sealed, dustproof and waterproof electrical control cabinet, gradeIP65

3Lubrication system

useTZElectric lubrication device for quantitative lubrication of sliding surfaces and ball screws

The interval and amount of oil injection can be adjusted to ensure that each lubrication point is lubricated....oiling

When the oil level is too low (oil shortage), the bed display will sound an alarm

Lubricating oil selection68#Guide rail lubricating oil

Lubrication box capacity2rise

Lubrication pump voltage220VMotor output power25W，. Great pressure2.5MpaDischarge flow rate110Ml/min

4Cooling system

Cooling system capacity240L

Stahl cooling pump, motor powerP1：1030W、P2：760W, traffic5 m3/h，Hmax：37.5m

Cutting cooling is achieved by spraying coolant with a universal nozzle

5Pneumatic system

The pneumatic system is equipped with a three-point combination, pressure switch, solenoid valve, etc., to achieve pneumatic tool change, spindle blowing, and pressure6-8KG/C㎡, flow rate220L/MINExternal air gun can clean the work area

6Electrical system

The standard system has complete and reliable interlocking, safety protection, and fault self diagnosis alarm functions

be equipped withRS232Standard communication interface, capable of storing programs on computer floppy disks

(Corresponding software can be provided according to user requirements)

Other systems can be selected according to user requirements

7Chip removal device

Chassis rear debris