JN-IV1160 (Fanuc 0I-MF direct coupled 12000rpm) vertical machining center

4、 Mechanical indicators of machine tools

1. Machine tool structure

The main basic components of the machine tool are made of high tensile strength cast iron, which is structurally optimized and has high static stiffness.

The spindle has a high rigidity structure and high mechanical efficiency.

The spindle motor adopts AC servo technology, which can achieve continuously variable forward and reverse rotation

The three-axis screw adopts a ball nut pair structure, which enables the three-axis to have good dynamic stiffness and resistance to thermal deformation

The three-axis adopts Taiwan's high-precision grade heavy-duty linear sliding rail, suitable for high-speed cutting, with strong rigidity and high efficiency

Three axis ball screw and drive servo motor are directly transmitted, with no cumulative transmission error and high repeatability and positioning accuracy

Automatic tool changing structure, quick tool changing, smooth action

All components and various measurement units of the machine tool comply with the International Organization of Units (ISO) standard

2. Machine tool protection

Machine tool protective devices are safe, complete, and reliable

Machine noise: meets national standards, 75db

The electrical control cabinet is sealed, dustproof and waterproof, with a rating of IP65

3. Lubrication system

Using TZ electric lubrication device, quantitatively inject lubrication for each sliding surface and ball screw

The interval and amount of oil injection can be adjusted to ensure that each lubrication point is properly lubricated ... oil injection

When the oil level is too low (oil shortage), the bed display will sound an alarm

Lubricating oil selected is 68 # guide rail lubricating oil

Lubrication box capacity 2 liters

Lubrication pump voltage 220V, motor output power 25W, high pressure 2.5Mpa, discharge flow rate 110Ml/min

4. Cooling system

Cooling system capacity 240L

Stahl cooling pump, motor power P1: 1030W, P2: 760W, flow rate 5 m3/h, Hmax: 37.5m

Cutting cooling is achieved by spraying coolant with a universal nozzle

5. Pneumatic system

The pneumatic system is equipped with a three-point combination, pressure switch, solenoid valve, etc., to achieve pneumatic tool changing, spindle blowing, pressure 6-8KG/C ㎡, flow rate 220L/MIN, external air gun, which can clean the working area

6. Electrical system

The standard system has complete and reliable interlocking, safety protection, and fault self diagnosis alarm functions

Equipped with RS232 standard communication interface, it can store programs on computer floppy disks

(Corresponding software can be provided according to user requirements)

Other systems can be selected according to user requirements

7. Chip removal device

Optional (chain plate chip conveyor)