JN-T500 (Fanuc 0I-MF direct coupled 20000rpm) drilling center

NegotiableUpdate on 06/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction -2. JN-T500 Technical Parameters Project Unit Specifications Workbench Size (length * width) mm650 * 400 Processing Range mm500 * 400T Slot Size (center distance * slot width * number of slots) mm125 * 1

Product Details

IIJN-T500 Technical Parameters

project		unit	Specifications
workbenches	Workbench dimensions (length * width)	mm	650*400
	machine range	mm	500*400
	T-slot size (center distance * slot width * number of slots)	mm	125143
	workbench. Heavy load capacity	kg	300
trip	X/Y/Z axis travel	mm	500/400/330
	Spindle nose end to worktable	mm	150-480 (optional height increase of 100mm)
	Spindle center to column guide surface	mm	430
main shaft	spindle taper		BT30
	Spindle speed	rpm	20000
	Spindle diameter	mm	105
	spindle bearing	individual	4XNSK7010C
	Spindle transmission mode		Direct equation
Spindle motor	spindle	kw	3.7-5.5KW
Spindle motor	torque	The continuous rated torque within 1500 revolutions per minute is 23.6. m, and the 1/2H torque is 35N. m
feed rate	Cutting feed (X/Y/Z axis)	mm/min	1~12000
feed rate	Fast feed (X/Y/Z axis)	mm/min	60000/60000/60000
accuracy	positioning accuracy	mm	0.008
accuracy	Repetitive positioning accuracy	mm	0.005
Automatic tool changing system	Number of cutting tools	T	21
	Knife changing method		Clamp arm type
	. Large tool diameter	mm	Φ 60 (Φ 80 adjacent space)
	. Large tool length	mm	250
	Weight of large cutting tools	kg	3 off load/10 full load
	Tool change time	s	1.75（T-T）
other	Air compression demand	kg/cm2	0.35-0.6
	High processing speed	mm/min	12000
	Cooling pump	w	1200
	Power demand	kva	10
	Weight	kg	3000
	Floor area (length * width * height)	mm	1700 * 2600 * 2500 (including water tank)

3、 Main configuration details table:

Product Name		specifications	Place of Origin	manufacturer
control system		0I-MF	Japan	fanuc
spindle		αiI2/20000	Japan	fanuc
servo motor	X-axis	αis8/4000	Japan	fanuc
	Y axis	αis8/4000
	Z-axis	αis812/4000
ball screw	X-axis	R28-16T4-FSDC-636.5-754.5-0.008	Taiwan	PMI (Intime)
	Y-axis	R28-16T4-FSDC-566.5-924.5-0.008
	Z-axis	R32-16T4-FSDC-584-713-0.008
Ball guide	X-axis	MSA30LS2SSF0A+R940-30/30PII	Taiwan	PMI (Intime)
	Y axis	MSA30LE2SSF0A+R1000+20/20PII
	Z-axis	MSA35S2SSF0A+R880+40/40PII
main shaft		DDS-30D-FNC-1	Taiwan	Pusen/Yucheng
Servo knife magazine		T3B21S-A-1A	Taiwan	Saint Jie
Screw rod bearing			Japan	NTN/NaCHi
Cooling pump		CBK 4-40/4	Taiwan	STAIRS
transformer		10KVA	joint venture	Luo Hong
Oil cooler			Taiwan	Poynter
lubrication system			Sino Japanese joint venture	river valley
Electrical components			Germany	Schneider
pneumatic components			Japan	SMC
Telescopic cover		T500-01000	Taiwan	Yide

4、 Mechanical indicators of machine tools

1Machine tool structure

The main basic components of the machine tool are made of high tensile strength cast iron, which is structurally optimized and has high static stiffness. The spindle has a high rigidity structure and high mechanical efficiency.

The spindle motor adopts AC servo technology, which can achieve continuously variable forward and reverse rotation

The three-axis ball screw adopts a pre stretched structure, which gives the three-axis good dynamic stiffness and resistance to thermal deformation. The three-axis adopts Taiwan's high-precision heavy-duty linear sliding rail, suitable for high-speed cutting, with strong rigidity and high efficiency

Three axis ball screw and drive servo motor are directly transmitted, with no cumulative transmission error, high repeatability and positioning accuracy, automatic tool changing structure, fast tool changing, and smooth action

All components and various measurement units of the machine tool comply with the International Organization of Units (ISO) standard

2Machine tool protection

Machine tool protection device is safe, complete, and reliable. Machine tool noise: meets national standards, 75dbSealed, dustproof and waterproof electrical control cabinet, gradeIP653Lubrication system

useTZElectric lubrication device for quantitative lubrication of sliding surfaces and ball screwsThe interval and amount of oil injection can be adjusted to ensure that each lubrication point is lubricated.... Oil injection

When the oil level is too low (oil shortage), the bed displays an alarm and lubricating oil is selected68 # guide rail lubricating oil

Lubrication box capacity2 liters

Lubrication pump voltage220VMotor output power25W，. Great pressure2.5MpaDischarge flow rate110Ml/min

4. Cooling system

Cooling system capacity240L

Stahl cooling pump, motor powerP1：1030W、P2：760W，flow5 m ³/h, Hmax: 37.5m cutting cooling with universal nozzle spraying coolant

5. Pneumatic system

The pneumatic system is equipped with a three-point combination, pressure switch, solenoid valve, etc., to achieve pneumatic tool change, spindle blowing, and pressure6-8KG/C

㎡, flow rate220L/MIN， External air gun for cleaning the work area6. Electrical system

The standard system has complete and reliable interlocking, safety protection, and fault self diagnosis alarm functionsRS232 standard communication interface, capable of storing programs on computer floppy disks

(Corresponding software can be provided according to user requirements) Other options can be selected according to user requirementssystem