-
E-mail
linpin@linpin.com
-
Phone
1580074900313818913497
-
Address
Linpin Industrial Park, No. 888 Zhangong Road, Linhai Industrial Zone, Fengxian District, Shanghai
Product Categories
Shanghai Linpin Instrument Co., Ltd
Lift type drip testing equipment
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product use: The lifting drip testing equipment is suitable for external lighting and signal devices, as well as for protecting the outer shell of automotive lighting fixtures. It can provide realistic simulation of various environments that electronic products and their components may be subjected to during transportation and use, such as water spraying and spray testing. To achieve the testing of waterproof performance of various products.
Product Details
| product name | Lift type drip testing equipment | |
| External dimensions | 1850×250×1850 （D*W*H）mm | |
Technical Parameter
Sales Hotline: 021-608 99999
| sexually ability finger treetop |
Spray aperture | ø0.4mm | |||||
| hole spacing | 20mm×20mm | ||||||
| Height range of drip trough | Adjustable from 200mm to 2000mm | ||||||
|---|---|---|---|---|---|---|---|
| rainfall | 1～3mm/min | ||||||
| Drip area | 800mm×1000mm | ||||||
| Drip tank height | 250mm | ||||||
| Test bench size | 0.7～1.0℃/min | ||||||
| Test bench angle | Adjustable from 15 ° to 45 ° (based on the vertical direction) | ||||||
| Rainy water | Adjustable from 15 ° to 45 ° (based on the vertical direction) | ||||||
| Time setting range | 1～9999H | ||||||
| send use material material |
temperature controller | Taiwan Weilun touch screen+German Siemens PLC module | |||||
| Worktable material | Aluminum alloy material | ||||||
| Drip tank | Water level regulation water supply tank, forklift lift equipped with flow meter | ||||||
| Sink material | 20mm acrylic sheet, arranged in a 20 × 20 square matrix for easy leveling correction | ||||||
| Safety protection | Automatic shutdown after motor overload, equipment timing, leakage, short circuit, and fault alarm | ||||||
| supply voltage | AC220V±10% 50Hz | ||||||
| Note: 1. The data was measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. The above parameters are for reference only and can be customized according to the specific testing parameters of the user 3. This technical information is subject to change without prior notice |
|||||||
