M-SYSTEM Love Mode Signal Isolation Converter

M-SYSTEM Love Mode Signal Isolation Converter

Ultra small signal isolation converter M2 series

DC signal converter
(Simulation type)

Main functions and strengths
● Ultra small plug-in converter with DC signal as input
Convert DC signals into standard process signals
● Quick response type can be selected
● Wide range of applicable power sources
● Can be installed with high density
Typical Applications
Isolate the on-site instruments from the control room and prevent external interference signals from entering

Enter specifications
■ Current input
Input resistor: Comes with a resistor (0.5W) installed on the input terminal
When selecting the current range, please enter the resistance value.
■ Voltage input
input resistance
量程 3～10 mV: 10kΩ 以上
量程 10～100 mV: 10kΩ 以上
Range 0.1-1V: 100k Ω or above
Range above 1V: 1M Ω or above
Possible manufacturing range
Input range: -300 to+300V DC
Input range: 3mV to 600V
Input zero voltage: less than 1.5 times the input range

Output specifications
■ Current output (manufacturing possible range)
Output range: 0-20mA DC
Output range: 1-20mA
Output zero current: less than 1.5 times the output range
Allow load resistance: a resistance value that ensures the voltage between the output terminals of the converter is below 15V
Voltage output (manufacturing possible range)
Output range: -10 to+15V DC
Output range: 5mV~22V
Output zero voltage: less than 1.5 times the output range
Allowable load resistance: A resistance value that allows the load current to be below 1mA (however, the output voltage should be above 0.5V)

M-SYSTEM Love Mode Signal Isolation Converter