M-SYSTEM Love Mode Signal Isolation Converter

M-SYSTEM Love Mode Signal Isolation Converter
Machine Specifications
Construction: Thin Insertion Construction
Connection method: M3 screw terminal connection (allowable torque of screw is 0.8N · m)
Terminal screw material: iron surface treated with chromate (standard) or stainless steel
Shell material: Black flame resistant resin
Isolation: input-output power supply room
Output range: approximately -10 to+120% (at 1-5V DC)
Zero adjustment range: -5% to+5% (adjustable from the front)
Range adjustment range: 95-105% (adjustable from the front)

input specifications
■ Current input
Input resistor: Comes with a resistor (0.5W) installed on the input terminal
When selecting the current range, please enter the resistance value.
■ Voltage input
Input resistance: 1M Ω or above
● Possible manufacturing range
Input signal code: 0
Input range: -300 to+300V DC
Input range: 1-600V
Input zero voltage: less than 1.5 times the input range
Input signal code: 01
Input range: -30 to+30V DC
Input range: 1-60V
Input zero voltage: less than 1.5 times the input range

Output specifications
■ Current output (manufacturing possible range)
Output range: -10 to+20mA DC
Output range: 1-30mA
Output zero current: less than 1.5 times the output range
Allow load resistance: a resistance value that ensures the voltage between the output terminals of the converter is below 15V. However, when the output is negative, it is a resistance value that causes the voltage between the output terminals to be below 7V.
Voltage output (manufacturing possible range)
Output range: -10 to+12V DC
Output range: 5mV~22V
Output zero voltage: less than 1.5 times the output range
Allowable load resistance: A resistance value that allows the load current to be below 1mA (however, the output voltage should be above 0.5V)

Set specifications
power consumption
AC power supply:
Approximately 3VA at 100V AC
Approximately 4VA at 200V AC
Approximately 5VA at 264V AC
DC power supply: approximately 3W
Temperature range for use: -5 to+55 ℃
Humidity range: 30-90% RH (non condensing)
Installation: Wall mounted or DIN rail mounted
Weight: Approximately 150g

Performance (expressed as a percentage relative to range)
Standard accuracy: ± 0.1%
Temperature coefficient: ± 0.015%/℃
Response time: below 180 μ s (0 → 90%)
The impact of power supply voltage fluctuations: ± 0.1%/allowable voltage range
Insulation resistance: 100M Ω or above/500V DC
Isolation strength:
Input output 1000V AC for 1 minute
Input/Output - Power - Ground 2000V AC for 1 minute

M-SYSTEM Love Mode Signal Isolation Converter