-
E-mail
1450695433@qq.com
-
Phone
15631635222
-
Address
No.1 Chang'an Road, South District of Economic Development Zone
Product Categories
- MHYA32 mining armored communication cable
- Medium and low voltage power cables
- HYA communication cable
- Mining lightweight rubber sheathed cable
- MHYVP Mining Shielded Communication Cable
- MHYV mining communication cable
- Mining shielded control cable
- MHYVR Mining Communication Soft Cable
- MKVVR mining control flexible cable
- Mobile metal shielded monitoring rubber sheathed flexible cable for coal mines
- Mining mobile rubber sheathed cable
Tianjin Jinshuo Cable Co., Ltd
MYP rubber sheathed cable 1140V mining mobile shielded cable
NegotiableUpdate on 01/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
MYP rubber sheathed cable 1140V mining mobile shielded cable $r $n This product is suitable for copper core rubber sheathed flexible cables for mobile equipment with rated voltage of 0.66/1.14KV and below
Product Details
MYP rubber sheathed cable 1140V mining mobile shielded cable
Mobile cable MY cable for coal mines, 1.14KV rubber cable
Rated voltage 0.66/1.14KV and mobile rubber sheathed flexible cable for mining use (GB12972.5-91) | ||
This product is suitable for copper core rubber sheathed flexible cables for mobile equipment with rated voltage of 0.66/1.14KV and below | ||
model |
name |
main purpose |
（MY）UY-0.38/0.66 |
Mining mobile rubber sheathed flexible cable |
Power connection of various underground mobile coal mining equipment with rated voltage of 0.38/0.66KV |
(MYP)UYP-0.38/0.66 |
Mining mobile shielded rubber sheathed flexible cable |
Power connection of various underground mobile coal mining equipment with rated voltage of 0.38/0.66KV |
(MYP)UYP-0.66/1.14 |
Mining mobile shielded rubber soft sheathed cable |
Power connection for various underground mobile coal mining equipment with a rated voltage of 0.66/1.14KV |
Number of cores x conductor |
Nominal thickness of sheath (mm) |
outer diameter of cable |
Reference weight of cable (kg/km) |
|||||||
Nominal cross-section (mm2) |
Power cord core |
UC-0.38/0.66 |
UCP-0.38/0.66 |
|||||||
Power cord core |
Ground wire core |
Insulation nominal thickness (mm) |
Small value |
Large value |
Small value |
Large value |
UC |
UCP |
||
3×4 |
1×4 |
1.4 |
3.5 |
20.3 |
23.4 |
23.7 |
27.2 |
670 |
785 |
|
3×6 |
1×6 |
1.4 |
3.5 |
23 |
26.4 |
26.4 |
30.1 |
838 |
927 |
|
3×10 |
1×10 |
1.6 |
4 |
27.5 |
31.3 |
30.9 |
34.7 |
1292 |
1400 |
|
3×16 |
1×10 |
1.6 |
4 |
29.6 |
33.4 |
33 |
36.8 |
1465 |
1586 |
|
3×25 |
1×16 |
1.8 |
4.5 |
35.6 |
39.8 |
39 |
43.2 |
2159 |
2296 |
|
3×35 |
1×16 |
1.8 |
4.5 |
38.7 |
42.1 |
42.1 |
46.3 |
2596 |
2783 |
|
3×50 |
1×16 |
2 |
5 |
43.6 |
47.1 |
47.1 |
51.4 |
3385 |
3548 |
|
3×70 |
1×25 |
2 |
5 |
49.7 |
54.4 |
52.4 |
57.1 |
4292 |
4477 |
|
Number of cores x conductor |
outer diameter of cable |
Reference weight of cable (kg/km) |
||||
Nominal cross-section (mm2) |
Power cord core |
Sheath nominal |
UC-0.38/0.66 |
|||
Power cord core |
Ground wire core |
Insulation nominal thickness (mm) |
Thickness (mm) |
Small value |
Large value |
|
3×10 |
1×10 |
1.8 |
4.5 |
32.4 |
36.2 |
1476 |
3×16 |
1×10 |
1.8 |
4.5 |
34.6 |
38.4 |
1737 |
3×25 |
1×16 |
2 |
5 |
41.4 |
45.3 |
2400 |
3×35 |
1×16 |
2 |
5 |
44.2 |
48.4 |
2857 |
×350 |
1×16 |
2.2 |
5.5 |
49.1 |
53.4 |
3549 |
3×70 |
1×25 |
2.2 |
5.5 |
55.5 |
60.2 |
4608 |
3×95 |
1×25 |
2.4 |
6 |
61.2 |
65.9 |
4608 |
1. The insulation resistance between the main cores of cable insulation and between the main cores and the ground wire shall not be less than 100M Ω· km when converted to+20 ℃.
2. The transition resistance of the main core shielding layer shall not exceed 3k Ω when converted to 20 ℃.
3. Product standard: MT818.5-1999.
4. The MYP cable consists of three main cores with insulation shielding and a ground wire wrapped in a semi conductive rubber layer, which is twisted around the semi conductive rubber layer to form a cable. Squeeze black chlorinated polyethylene rubber sheath or black chloroprene rubber sheath outside.
5. Conductive core: Made of soft copper wire, its performance complies with GB/T3956-1997.
6. Insulation: XJ-00A rubber according to GB7594.2-1987 is used.
7. Core identification: Insulation color separation identification is used, with the main core being red, green, and white.
8. Ground wire: covered with a semi conductive rubber.
9. Insulation shielding: Cover the insulation surface with a semi conductive tape.
10. Cabling: Three main cores and one ground wire are twisted in the right direction around a semi conductive rubber pad core to form a cable.
11. Sheath: XH-03A rubber according to GB7594.7-1987 is used. The oxygen index of the sheath rubber is ≥ 40.
12. The flame retardant performance of the finished cable meets the requirements of MT386-1995.
13. Cable marking: The surface of the cable is printed with the model, voltage, specifications, and manufacturer's name.
MYP rubber sheathed cable 1140V mining mobile shielded cable
Our factory solemnly declares:
1. Sign a product quality assurance certificate and promise that unqualified products will never leave the factory.
2. Provide product quality tracking services within two years and keep customer service records in archives for 20 years.
3. Due to product quality issues, our factory will provide warranty, return, replacement, and meet customer requirements.
Product specifications: Customized according to customer requirements
Product quantity: The minimum order quantity is 100 meters, and the price for 100-200 meters will increase
Packaging instructions: Packaged in trays with a length of meters, packaged in cable shafts with a length of meters
Price Description: The price is updated at any time based on the fluctuation of copper prices
Similar Product Recommend
