Mini motor brushless motor

Mini motor brushless motor

The Mini Motor brand was born in 1974, when Mini Motor produced motors for the industrial sector. Mini Motor has added two more elements in terms of metal and electricity: electronics and computerization.

Mini Motor product classification:

Mini Motor Gear

Mini Motor　Brushless 无 刷

Mini Motor Clean

Mini Motor Driver

Mini Motor　New Products 新产品

Our Mini Motor motors are designed for action. Packaging, bottling, paving, boxed stacking, and twisting - this requires compact design, precise movement, correct speed, simple assembly, and resistance. In one sentence: ab sole Our motor learning festival: They can flexibly learn grammar and customization, coupled with their ability to adjust (speed and power with precision). In the world of Industry 4.0, lead speed is crucial, especially when combined with simple integration. Our new DR series offers integrated products: integrated drives that allow control of speed and torque, as well as integrated connected modules that support the most common fieldbus

GEAR

Mini Motor　AM THREEPHASE

Mini Motor　ASYNCHRONOUS MOTOR

Mini Motor Asynchronous Motor

Mini Motor has 2 or 4 poles in three stages, enclosed for external ventilation. F-type winding. IP65 protection according to CEI EN 60529. Power ranging from 9 to 270 W. versions B5-B14

Mini Motor should be required to provide motors equipped with electromagnetic brakes at 230 Vac, labeled with the letters KA (AMKA) or 24 Vdc, labeled with the letters KB (AMKB).

Mini Motor　GEAR

Mini Motor　AM MONOPHASE

Mini Motor　ASYNCHRONOUS MOTOR

Mini Motor Asynchronous Motor

Mini Motor single-phase has 2 or 4 poles, enclosed for external ventilation. Thermal safety notches on single-phase models. F-type winding. IP65 protection according to CEI EN 60529. Power ranging from 9 to 270 W. versions B5-B14

Requirement: Motors equipped with electromagnetic brakes shall be provided at 230 Vac, labeled with the letters KA (AMKA) or 24 Vdc, labeled with the letters KB (AMKB).

Mini Motor Gear

Mini Motor Communication

Mini Motor Coaxial Gear Motor with Gear Pair

Mini Motor motor: asynchronous single-phase or three-phase, with 2 or 4 poles,

Mini Motor is enclosed and has external ventilation. single-phase

Thermal safety incision of Mini Motor model. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor gear unit: using die cast aluminum sleeve. Box hardening and

Mini Motor hardened gear pairs with shaft rotating roller bearings. use

Mini Motor is lubricated with long-life oil. The sealing ring is made of special rubber and is used for high temperatures.

15 gear ratios (i) are available, ranging from 7.4 to 441.9. Rated torque 5 Nm. Version

B3 or B5.

Mini Motor Gear

Mini Motor Administrative Coordination Committee

Mini Motor Coaxial Gear Motor with Gear Pair

Mini Motor motor: DC and permanent magnet, enclosed

Mini Motor and external ventilation. F-type winding. According to CEI EN 60529, it has 24 Vcc

Mini Motor absorbs power of 60 W. IP65 protected power supply.

Mini Motor gear unit: using die cast aluminum sleeve. Box hardening

Mini Motor and hardened gear pair with shaft rotating roller bearings.

Mini Motor is lubricated with long-life oil. The sealing ring is made of special rubber and is used for high temperatures. 15 gear ratios (i) are available, ranging from 7.4 to 441.9. Rated torque 5 Nm. Version B3 or B5.

Mini Motor Gear

高手

Coaxial gear motor and planetary reduction gear

Mini Motor Motor:

MiniMotor asynchronous single-phase or three-phase, with 2 or 4 poles, enclosed for external ventilation. Thermal safety incision of single-phase model. According to CEI EN 60529 protection class F. IP65.

Mini Motor Gear Unit:

The first stage is die-casting aluminum shell, and the second stage is steel. Box hardening and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures.

15 gear ratios (i) are available, ranging from 37 to 2209.5. Rated torque 23.5 Nm. Version B3 or B5.

COAXIAL GEARED MOTOR WITH PLANETARY REDUCTION GEAR

gear

ACCE

Coaxial gear motor and planetary reduction gear

Mini Motor motor: DC and permanent magnet, enclosed and externally ventilated. F-type winding. 24 Vdc power supply. According to CEI EN 60529, the absorbed power is 60 W. IP65 protection.

Mini Motor gear unit: fi rst stage with die cast aluminum shell,

Mini Motor Steel Second Stage. Box hardening and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures. 15 gear ratios (i) are available, ranging from 37 to 2209.5. Rated torque 23.5 Nm. Version B3 or B5.

Mini Motor Gear

Mini Motor Pennsylvania

Coaxial gear motor: asynchronous single-phase or three-phase, 2 or 4-pole,

Enclosed and ventilated from the outside. Thermal safety incision of single-phase model. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor gear unit: Made of mold with outer shell - cast aluminum. Shell - hardened and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures. 14 gear ratios (i) are available, ranging from 6.48 to 372.8. Rated torque of 20 Nm. Version B3 or B5.

Mini Motor Gear

Mini Motor Park

Mini Motor coaxial gear motor: DC and permanent magnet, enclosed motor without external ventilation. F-type winding. 24 Vdc power supply. maximum

Input power 230 W. IP65 protection according to CEI EN 60529.

Gear device: using die cast aluminum sleeve. Box hardening and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures. 14 gear ratios (i) are available, ranging from 6.48 to 372.8. Rated torque of 20 Nm. Version B3 or B5.

Mini Motor Gear

Mini Motor　PAE

Coaxial gear motor and planetary reduction gear

Mini Motor Motor:

Mini Motor asynchronous single-phase or three-phase, with 2 or 4 poles, enclosed for external ventilation. Thermal safety incision of single-phase model. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor gear unit:

The first stage of Mini Motor is cast aluminum casing, and the second stage is made of steel. Box hardening and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures.

Thirteen gear ratios (i) are available, ranging from 48.7 to 1770.9. Rated torque of 90 Nm. Version B3 or B5.

Mini motor brushless motor

Mini Motor Gear

Mini Motor Steps

Mini Motor has a planetary reduction gear motor

Mini Motor Coaxial Gear

Mini Motor motor: DC, enclosed, no need for external ventilation. F-type winding. 24 Vdc power supply. Maximum absorbed power 230 W. IP65

Mini Motor protection according to CEI EN 60529.

Mini Motor gear unit: fi rst stage with die cast aluminum sleeve,

Steel second stage. Box hardening and hardened gear pairs with shaft rotating roller bearings. Lubricate with long-life oil. The sealing ring is made of special rubber and is used for high temperatures. Thirteen gear ratios (i) are available, ranging from 48.7 to 1770.9. Rated torque of 90 Nm. Version B3 or B5.

Mini Motor Gear BC2000 Worm Gear Motor.

Mini Motor single-phase and three-phase motors, up to 20 W. Center distance of 20 millimeters.

Mini Motor Motor:

Single phase and three-phase, with 2 poles enclosed for external ventilation. Safe thermal incision for single-phase models. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor with die cast aluminum casing (UNI 5076). Center distance of 20 mm. CARO bronze ring, hardness of 120 ÷ 160 HB. Hardened steel screws and ground threads. Fluorinated polymer (FPM) grooves. Lubricate with synthetic oil (EP).

Mini Motor offers 6 reduction gear ratios: 10/15/25/45/60/80.

Mini Motor has a maximum rated torque of 3 Nm. It is manufactured for B3/B14.

Mini Motor Gear BC2000 12-2400 Trillion Worm Gear Motor

Mini Motor Motor:

Mini Motor DC and permanent magnet, enclosed. F-type winding. 24 Vdc. Absorbed power 60 W. IP65 protection according to CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor with die cast aluminum casing (UNI 5076). Center distance of 20 mm. CARO bronze ring, hardness of 120 ÷ 160 HB. Hardened steel screws and ground threads. Fluorinated polymer (FPM) grooves. Lubricate with synthetic oil (EP).

Mini Motor offers 6 reduction gear ratios: 10/15/25/45/60/80. The maximum rated torque is 5.2 Nm. Manufacturing B3/B14.

Mini Motor Gear BCE2000 Worm Gear Motor

Add the final stage of planet reduction.

Mini Motor single-phase and three-phase motors, up to 20 W. Center distance of 20 millimeters.

Mini Motor Motor:

Mini Motor asynchronous single-phase and three-phase 2-pole, enclosed and externally ventilated. Safe thermal incision for single-phase models. F-type winding. IP65 according to CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor with die cast aluminum shell in fi rst reduction stage, worm screws and steel with three internal planetary gears in the second planetary reduction stage, ratio i=5. Center distance 20 mm. CARO bronze ring, hardness 120 ÷ 160 HB. Hardened steel screws and ground threads. fluorination

Mini Motor Polymer (FPM) groove. Lubricate with synthetic oil (EP).

Mini Motor offers 6 reduction gear ratios: 50/75/125/225/300/400. The maximum rated torque is 14.4 Nm. Manufacturing B3/14.

Mini Motor 齿轮 BCE2000 12-24MP

Worm screw gear motor with planetary reduction

Mini Motor Motor:

Mini Motor uses permanent magnets for direct current and is enclosed. F-type winding. 24 Vdc power supply. According to CEI EN 60529, the absorbed power is 60 W. IP65 protection.

Mini Motor Gear Unit:

During the fi rst reduction stage with die cast aluminum shell, during the second planetary reduction stage with worm screws and steel, with three internal planetary gears, in a ratio of i=5. Center distance of 20 mm. CARO bronze ring, hardness of 120 ÷ 160 HB. Hardened steel screws and ground threads.

Fluorinated polymer (FPM) grooves. Lubricate with synthetic oil (EP).

Provide 6 reduction gear ratios: 50/75/125/225/300/400. The maximum rated torque is 15 Nm. Manufacturing B3/14.

Mini Motor Gear

Mini Motor emcee

Mini Motor Worm Gear Motor

Mini Motor worm gear motor. Single phase and three-phase motors range from 14 to 180 W. The center distance is 26 mm.

Mini Motor Motor:

Asynchronous single-phase or three-phase, with 2 or 4 poles, enclosed for external ventilation. Thermal safety incision of single-phase model. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor uses die cast aluminum casing. Center distance of 26 mm. CARO bronze ring, hardness of 120 ÷ 160 HB. Hardened steel screws, ground threads rotate on balls and rolling bearings. Lubricate with special long-life oil. The sealing ring is made of special rubber and is used for high temperatures.

10 levels of ratios (i) are available, ranging from 5 to 80. Rated torque 13 Nm. Version B3 or B5. B5/S left version - B5/D right version.

Mini Motor Gear

Mini Motor Mike

Mini Motor Worm Gear Motor

Mini Motor MP MOTOR: DC and permanent magnet, enclosed, with external ventilation. F-type winding. 24 Vdc power supply. Absorbed power of 60 W. IP65 protection according to CEI EN 60529.

Mini MotorMP3N-MP4N motor: DC and permanent magnet, enclosed, no need for external ventilation. F-type insulation layer. 12 or 24 Vdc power supply. According to CEI EN 60529, the absorbed power is 230 W. IP65 protection.

Mini Motor gear unit: with die cast aluminum casing. The center distance is 26 mm

CARO bronze ring, with a hardness of 120 ÷ 160 HB. Hardened steel screws, ground threads

Rotate on balls and rolling bearings. Lubricate with special long-life oil. The sealing ring is composed of

Made of special rubber, used for high temperatures. 10 levels of ratios (i) are available, ranging from 5 to 80. uh

Fixed torque of 9 Nm. Version B3 or B5. B5/S left version - B5/D right version.

Mini Motor Gear Mac

Worm gear motor with final planetary reduction stage.

Single phase and three-phase motors range from 14 to 180 W. The center distance is 26 mm.

Mini Motor Motor:

Asynchronous single-phase or three-phase, with 2 or 4 poles, enclosed for external ventilation. Thermal safety incision of single-phase model. F-type winding. IP65 protection according to CEI EN 60529.

Mini Motor　GEAR UNIT：

In the first reduction stage with die cast aluminum casing, in the second planetary stage with worm screws and steel casing, and with CARO bronze ring, with a hardness of 120 ÷ 160 HB. Hardened steel screws, ground threads rotate on balls and rolling bearings. Lubricate with special long-life oil. The sealing ring is made of high-temperature special rubber. 9 gear ratios (i) are available, ranging from 37.5 to 400.

Mini Motor rated torque 23.5 Nm. Version B3 or B5. B5/S left version - B5/D right version.

Mini Motor Gear Max WORM Screw Gear Motor and Planetary Reduction

Worm gear motor with final planetary reduction stage. DC motors ranging from 37 to 150 W with permanent magnets. The center distance is 26 millimeters.

Mini Motor GEAR MP Motor:

DC and permanent magnets, enclosed and externally ventilated. F-type winding. 24 Vdc power supply. According to CEI EN 60529, the absorbed power is 60 W. IP65 protection.

Mini Motor MP3N-MP4N motor: DC and permanent magnet, enclosed motor without external ventilation. F-type insulation layer. 12 or 24 Vdc power supply. Absorbed power 230 W. IP 65 protection according to CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor uses die cast aluminum casing in the first reduction stage and worm screws and steel sleeves in the second planetary stage, with three internal planetary gears. CARO copper ring, with a hardness of 120 ÷ 160 HB. Hardened steel screws, ground threads rotate on balls and rolling bearings. Lubricate with special long-life oil. The sealing ring is made of special rubber and is used for high temperatures.

9 gear ratios (i) are available, ranging from 37.5 to 400. Rated torque 23.5 Nm. Version B3 or B5. B5/S left version - B5/D right version.

Mini Motor Brushless

Mini Motor brushless technology refers to high power to weight ratio, high speed, and fully electronic streaming. This means higher efficiency and lower tolerance for mechanical wear: high torque to weight ratio; Rebuilt the Liabile, with longer lifespan and lower noise. In our brushless products, the DBS series is at the forefront of the world of automation and motion control. In fact, the brushless motor supports 6 different types of out of town buses, which have internal grinding drive and multi turn absolute encoder, and can store the final positioned coordi nates for up to 6 months. Integrated servo and gear motor, with all components integrated, optimized design, and advanced connections. In short, the ideal product is in the Dust 4.0 scenario.

Mini Motor Brushless - DBS S1 Series Continuous Service

DBS Bank

Mini Motor brushless server with integrated driver.

Mini MotorEN: A brushless server with integrated drivers. Power ranging from 125 to 250 W

Mini Motor Motor: Brushless 4-pole three-phase sinus motor, enclosed. A rotor with NdFeB magnets. Hot cut-off. Wrap F-type thermal cutting. IP65 protection complies with IEC/EN 60529 standard. Bearings have reduced rebound and special grease high temperature.

Mini Motor has a rated torque of up to 0.75 Nm.

Mini Motor Driver: Power 24 and/or 48 Vdc • Magnetic Absolute Encoder SSI (12 bit single turn/20 bit multi turn) with internal buffer battery+5 PNP digital inputs and 1 analog input -10+10V extension. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parameterization • Torque, speed, position, and positioning control.

All models of Mini Motor use a new 'open' platform, which allows configuration with the following main protocols: CanOpen, Ethernet Carter, Hyundai, Ethernet/IP, Profinet, power link.

2. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor Debussy

Mini Motor has a brushless servo with integrated drive and planetary reduction gears.

Mini Motor EN: Brushless servo motor with integrated drive and planetary gear rated torque ranging from 2.2 to 36.5 Nm.

Mini Motor Motor: Brushless 4-pole three-phase sinus motor, enclosed. A rotor with NdFeB magnets. Hot cut-off. Wrap F-type thermal cutting. IP65 protection complies with IEC/EN 60529 standard. Bearings have reduced rebound and special grease high temperature.

Mini Motor Driver: Power 24 and/or 48 Vdc • Magnetic Absolute Encoder SSI (12 bit single turn/20 bit multi turn) with internal buffer battery+5 PNP digital inputs and 1 analog input -10+10V extension. (0-5 o 4-20mA optional) • 1 Relay output (NC-NO) • USB port for parameterization • Torque, speed, position, and positioning control.

Mini Motor gear unit: planetary and hardened steel shell and baked precision teeth. 7. Sun and planetary gears that have undergone heat treatment.

Mini Motor sealing ring is made of special high-temperature rubber (FKM).

Mini Motor is lubricated with special long-lasting oil.

The rated torque of Mini Motor is as high as 33.2 Nm.

All models of Mini Motor use a new 'open' platform, which allows configuration with the following main protocols: CanOpen, Ethernet Carter, Hyundai, Ethernet/IP, Profinet, power link.

3. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor McDebus

Mini Motor brushless servo with integrated drive and worm screw reduction gear.

Mini Motor EN: Brushless servo with integrated drive and worm screw reduction gear. Rated torque 9 Nm

Mini Motor Motor: Brushless 4-pole three-phase sinus motor, enclosed. A rotor with NdFeB magnets. Hot cut-off. Wrap F-type thermal cutting. IP65 protection complies with IEC/EN 60529 standard. Bearings have reduced rebound and special grease high temperature.

Mini Motor Driver: Power 24 and/or 48 Vdc • Magnetic Absolute Encoder SSI (12 bit single turn/20 bit multi turn) with internal buffer battery+5 PNP digital inputs and 1 analog input -10+10V extension. (0-5 o 4-20mA optional) • 1 Relay output (NC-NO) • USB port for parameterization • Torque, speed, position, and positioning control.

Mini Motor gear unit: equipped with worm screws and die cast aluminum gearbox. 26 millimeters center distance. The hardness of the CARO copper crown is 120 ÷ 160 HB. The worm is made of steel bars and has grounding threads. The sealing ring is made of special high-temperature rubber (FKM). Lubricate with special long-lasting oil. There are 10 available gear ratios (i), ranging from 5 to 80. The rated torque is up to 9 Nm.

Mini Motor versions B3-B5 (B5/S left - B5/D right).

All models of Mini Motor use a new 'open' platform, which allows configuration with the following main protocols: CanOpen, Ethernet Carter, Hyundai, Ethernet/IP, Profinet, power link.

N.B。 To choose a suitable gear motor for Mini Motor, please refer to the relevant duty chart and maximum shaft load factor.

Mini Motor These gear motors need to run. Therefore, during the first 30 working hours, the torque will be lower than the torque indicated in the data.

4.Mini Motor Current Page:MCEDBS

Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor McDebus

Mini Motor Brushless Worm Servo Machine

Mini Motor and Planetary Reduction Gear

Mini Motor and integrated drive. should

Requirements for Mini Motor Electromagnetic Brake (MCEDBSK).

5. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor Polychlorinated

Brushless server with integrated driver and worm screw reduction gear.

Mini Motor should have an electromagnetic brake

Requirements for (PCDBSK)

6. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor Polychlorinated Biphenyls

Mini Motor Brushless Worm Servo Machine

Mini Motor with planetary reduction gear and integrated drive.

According to the requirements of electromagnetic brake (polychlorinated biphenyl).

7. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor　XCDBS

Equipped with integrated driver and worm screw deceleration

Brushless servo for Mini Motor gears.

8. Mini Motor Brushless - DBS S1 Series Continuous Service

Mini Motor Smart Key

The key to parameterization of wireless radio sets

Mini Motor Smartkey is a tool that provides access to micro motor integrated drive system variables. Any device is equipped with 2.4Ghz WIFI antenna and Internet browser.

It can read and write all motor parameters, check statistical data during use, and start it.

Technical details of Mini Motor:

Mini Motor compatible products: DBS Bank FC-DR

Mini Motor access: via browser

Mini Motor Communication: Wireless 2.4GHz

Mini Motor Cleaning

1. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor　ACF

Mini Motor Coaxial Gear Motor

Mini Motor inline lined gear motor. 31 W three-phase motor

Mini Motor Motor:

Mini Motor Stepless Three Phase Motor, 2-pole, H-class winding according to CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529.

Mini Motor gear unit:

Mini Motor uses die cast aluminum casing. The hardened box and hardened bearings should require the output of stainless steel shafts. Lubricate with durable oil (non-toxic).

Mini Motor sealing rings are provided in special 15 gear ratios (i), ranging from 7,4 to 441,9. Rated torque from 0, 8 to 5 Nm. Version B3 or B5.

Mini Motor white epoxy resin protective coating.

Always apply the environment

Mini Motor inline six position gear motor. 31 W three-phase motor.

2. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor Assef

Mini Motor with planetary reduction gear

Coaxial gear motion of Mini Motor motor: an asynchronous three-phase motor with 2 poles, wound in accordance with CEI EN 60034-1 for Class H. IP67 standard protection complies with CEI EN 60529.

Mini Motor gear unit: using die cast aluminum sleeve. The hardened box and hardened bearings should require the output of stainless steel shafts. Lubricate with durable oil (non-toxic). The sealing ring is provided in a special 15 gear ratio (i), ranging from 37 to 2209,5. Rated torque from 3.9 to 23.5 Nm. Version B3 or B5. White epoxy resin protective coating. Always apply the environment. Customized products should be requested.

3. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor Pav

Mini Motor inline Hailikar gear motor.

Mini Motor 130 W three-phase motor

Mini Motor Motor:

Mini Motor Stepless Three Phase Motor, 2-pole, H-class winding according to CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529.

Mini Motor gear unit:

Mini Motor is made of cast aluminum casing. The hardened box and hardened bearings should require the output of stainless steel shafts. Lubricate with durable oil (non-toxic).

Mini Motor sealing rings offer 14 gear ratios (i), ranging from 6, 48 to 372,8.

The rated torque of Mini Motor ranges from 2.8 to 20Nm. It has a white epoxy resin protective coating.

Mini Motor always applies to the environment.

Mini Motor should request customized products.

4. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor Pav

Mini Motor coaxial gear power unit and planetary reduction gear.

Mini Motor is a coaxial gear motor with the following characteristics:

Mini Motor Motor: An asynchronous three-phase motor with 2 poles, with H-class winding according to CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529.

Mini Motor gear unit: using die cast aluminum sleeve. The second stage of the steel industry. The hardened box and hardened bearings should require the output of stainless steel shafts. Lubricate with durable oil (non-toxic). The sealing ring provides a special 13 gear ratio (i) ranging from 48,7 to 1770,9. Rated torque from 19.9 to 90 Nm. White epoxy resin protective coating. Always apply the environment. The standard PAE version also offers IP67, known as PAEF. Customized products should be requested.

5. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor Mechoff

Mini Motor worm gear motor. 31-88 W three-phase motor. The center distance is 26 millimeters.

Mini Motor Motor:

Mini Motor is an asynchronous three-phase motor with 2 poles, enclosed. Thermal safety function. H-type winding complies with CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529.

Mini Motor Gear Unit:

Mini Motor uses die cast aluminum casing. The wheelbase is 26 millimeters. The wheel rim is made of special bronze with a hardness of 120/160 HB. Worm gears require hardened steel and grinding wire for rotating balls and roller bearings, as well as stainless steel for the output shaft. Lubricate with special long-lasting oil. The sealing ring is made of special white rubber and is used for high temperatures. Rated torque from 0, 5 to 5 Nm. Version B3 or B5. B5/S left version - B5/D right version.

Mini Motor white epoxy resin protective coating.

Mini Motor always applies to the environment.

Mini Motor should request customized products.

6. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor European Economic Forum

Mini Motor has worm gears with planetary reduction gears.

Mini Motor Motor: An asynchronous three-phase motor with 2 poles, enclosed. Thermal safety function. H-type winding complies with CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529.

Mini Motor gear unit: using die cast aluminum casing. The second stage of the steel industry. The wheelbase is 32 millimeters. The wheel rim is made of special bronze with a hardness of 120/160 HB. Worm gears require hardened steel and grinding wire for rotating balls and roller bearings, as well as stainless steel for the output shaft. Lubricate with special long-lasting oil. The sealing ring is made of special white rubber and is used for high temperatures. Rated torque from 13.1 to 90 Nm. Version B3 or B5. B5/S left version - B5/D right version. White epoxy resin protective coating. Always apply the environment.

Mini Motor should request customized products.

7. Mini Motor Cleaning - F Series - Food and Beverage

Ph.D.

The digital driver of Mini Motor asynchronous three-phase motor can reach up to 0.27 kW.

Mini Motor can be embedded in the PA-PAE MC-MCE-PCE series for communication.

8. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor DRF Bus

The asynchronous three-phase motor with communication between digital driver and fieldbus can reach up to 0.27 kilowatts.

Embeddable communication - PA-PAE-MCE-PC-PCE series.

9. Cleaning - F Series - Food and Beverage

Mini Motor McFarks

Mini Motor Worm Gear Motor

Mini Motor with gear motor. Motor: 4-pole sinusoidal brushless motor, enclosed 188-293 W. rotor and NdFeB magnet.

Mini Motor motor: 4

Mini Motor Brushless Sinus Motor, Closed. A rotor with NdFeB magnets. Safety circuit breaker. H-type winding complies with CEI EN 60034-1. IP67 standard protection complies with CEI EN 60529. Feedback and 2-pole parser. Reduce high-temperature clearance bearings with special grease.

Mini Motor Gear Unit:

Mini Motor with die cast aluminum casing. Center distance of 26 mm. CARO bronze ring, hardness of 120 ÷ 160 HB. Worm gears require hardened steel and grinding wire for rotating balls and roller bearings, as well as stainless steel for the output shaft. Lubricate with special long-lasting oil. The sealing ring is made of special rubber and is used for high temperatures. 10 levels of ratios (i) are available, ranging from 5 to 80. Rated torque up to 12 Nm. Version B3 or B5. B5/S left version - B5/D right version. White epoxy resin protective coating.

Mini Motor always applies to the environment.

10. Mini Motor Cleaning - F Series - Food and Beverage

Mini Motor Mini 300

Mini Motor EN: Digital driving gear (inverter/driver): AC brushless servo up to 2.3 Nm: asynchronous three-phase motor up to 0.75 kW.

The Mini Motor Miniaction 300 is designed to control three-phase asynchronous motors and brushless AC motors (BLAC) with a power output of up to 0.75 kW. The core of the power supply is the intelligent IGBT module (IPM), equipped with a protection system to ensure reliable and efficient equipment, while limiting the demand for external components, among other things. The control logic consists of a 32-bit microcontroller with a set of optimized speed instructions, making it very suitable for controlling precision motors.

Mini Motor Performance

Mini Motor closed-loop speed control

Mini Motor Position Control

Limitations on the delivery torque of Mini Motor

Mini Motor stores up to 127 motion configuration files

17 digital inputs and 5 digital outputs

2 analog inputs and 1 analog output

Input of incremental encoder for line driver program type

Input of parser

24V output, used to control and maintain the brake

Output for connecting external braking resistance

Built in EMC filter (C3 industrial environment rating)

Keyboard with detachable display screen (optional)

Mini Motor's new product

Dr. Mini Motor

The digital driver of Mini Motor asynchronous three-phase motor can reach up to 0.27 kW.

Mini Motor can be embedded in AC ACE-PA-PAE MC MCE PC PCE series

Mini Motor's new product

There is Dr. Bus near Mini Motor

Inverter for three-phase motor

Mini Motor Reverse Digital Driver

The Mini Motor DR-BUS is designed to be integrated with three-phase motors, providing a compact solution that uses on-site bus protocols to control motor speed.

INVERTER: 230V single-phase or 115V single-phase power • 0-230V 0-120Hz output • USB port for parameterization • V/F or FOC (sensorless) speed control • Support for fieldbus: Ethernet, Ethernet, power link, Profinet • Optional brake management 24V 10W • Optional STO • IP 65

Technical details of Mini Motor:

Mini Motor supply voltage: 230V 50/60 Hz 2.8 single-phase, 115V 50/60Hz 1.4 single-phase

Mini Motor output: 0-230V 0-120Hz 1.4 arm/5 arm peak

Mini Motor motor power: up to 270W

Mini Motor motor control algorithm: V/F, FOC

Mini Motor fieldbus: Ethernet, Ethernet, power link, professor

Mini Motor　IP 65

Mini Motor's new product

Mini Motor　CCS

Mini Motor 24V brushless server for format change

Mini Motor: Mini Motor brushless three-phase four pole sinus motor, enclosed. A rotor with NdFeB magnets. Hot cut-off. Wrap F-type thermal cutting. IP65 protection complies with IEC/EN 60529 standard. Bearings have reduced rebound and special grease high temperature.

Mini Motor drive: P now 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single revolution/20bit multi revolution) and internal buffer battery • USB port for parameterization • Torque, speed, position and Hawking control • Fieldbus support: Canopen, Modbus Rtu, Ethernet, Ethernet, power link Profinet。

Mini Motor gear unit: with molded aluminum body (UNI 5076). 20mm center distance. CARO copper crown, hardness 120 ÷ 160 HB. Fluorocarbon polymer sealing ring (FPM). Lubricate with synthetic oil (EP).

Mini Motor service: D uses S3 25% within 10 minutes of nominal torque.

Technical details of Mini Motor:

Mini Motor nominal torque: 6Nm

Mini Motor rated speed: 72 rpm

Mini Motor power output: 45W

Mini Motor operating cycle: S3 25% nominal value exceeding 10 minutes S2 5 minutes at 5Nm

Mini Motor fieldbus: Canopon, Modebus Rtu, EtherCat, Ethernet, power link, Profenet.

Mini Motor　IP 65

A 4-pole sine brushless motor with a rotary transformer.

Brushless motor 4-pole sine brushless motor

Fully enclosed. A rotor with neodymium iron boron magnets. Safety circuit breaker. Winding level F. IP65 protection level, in compliance with CEI EN 60529 standard. Feedback with 2-pole rotary transformer.

Low clearance bearings using special lubricating grease, suitable for high temperatures.

According to the requirements, a 24 Vdc NC brake (normally closed) with permanent magnets can be provided. It is identified by the letter K (BSK).

Model:

Brushless - BS 35/60

Brushless - BS 45/35

Brushless - BS 45/70

Brushless - BS 55/100

Brushless - BS 55/50

Brushless - BS 80/100

Brushless - BS 80/50

Brushless - BS 35/30