NSC2200E Communication and Data Processing Device

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NSC2200E communication and data processing device communication control device is the information center of the substation automation system, which communicates through different communication media and communication protocols,

Product Details

NSC2200E Communication and Data Processing DeviceNSC2200E Communication and Data Processing Device

1、 Hardware composition

The NSC2200E communication machine is developed using technology that meets the high reliability requirements of users. It adopts a highly reliable platform in hardware

Platform, fanless, no hard drive, low power consumption, meets the requirements of long-term uninterrupted operation. The operating system adopts an embedded multitasking real-time operating system

Unified (Linux), the communication software adopts modular design, multitasking operation, reliable operation, and will not affect each other.

The hardware platform of NSC2200E adopts a plug-in design, which can be flexibly configured according to different requirements. The following introduces commonly used modules.

1. Chassis

The chassis adopts a standard height of 6U and a width of 1/2 floor cabinet. It can run on a single machine or be combined into a layer for installation

It is reliable.

2. Bus board

The backplane serves as the carrier for other modules, providing voltage to them and connecting them through a signal bus. It has 4-8 slots,

You can choose based on the number of modules used in the project

3. Power module

The power module provides power to other modules on the backplane. The input voltage range is 110-220 VAC/DC, with a wide adaptability.

4. CPU module

The main frequency of the CPU module is 226MHz and the memory is 128MB. It uses onboard FLASH for kernel, program, and parameter storage, as well as built-in memory

USB port for storage expansion. The CPU module has 4 10/100M adaptive Ethernet ports for network communication.

5. Serial port card

Used for serial communication. Each serial port card has 8 serial ports. According to engineering needs, the serial port card can be expanded, up to a maximum of 2 strings can be expanded

Mouth card.

6. Panel

Used for connecting LCD displays, indicator lights, keyboards, and CPU modules on the front panel. Using convex film lights, LCD display with small keys

Disk, used to understand the basic information of operation.