Welcome Customer !

Membership

Help

Jiangsu Shengmeite Safety Equipment Co., Ltd
Custom manufacturer

Main Products:

smart-city-site>Products

Jiangsu Shengmeite Safety Equipment Co., Ltd

  • E-mail

    1470256239@qq.com

  • Phone

    18951061261

  • Address

    No.1 Shuishan Avenue, Suqian Software and Service Outsourcing Industrial Park

Contact Now

National Competition Marking Bullet Identification Bullet Protective Clothing Color Bullet Training Clothing

NegotiableUpdate on 02/13
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The national competition marking bullet identification bullet protective clothing and colored bullet training clothing standards comply with GA141-2010. The outer layer of the protective clothing is made of 220g/square meter polyester blended fabric. Mark the key protection areas of the colored elastic suit: chest, back, shoulders, collar, neck, front lower abdomen and crotch, elbows, knee joints. The chest, shoulders, abdomen, crotch, collar, front knee, and elbow pads are all reinforced with 6MM thick, 300g/square meter blended elastic fabric for protection. The 350mm area below the back shoulder is reinforced with 4MM thick, 200g/square meter blended elastic fabric for protection
Product Details

National Competition Marking Bullet Identification Bullet Protective Clothing Color Bullet Training Clothing


[National Competition Marking Bullet Protective Clothing] [Conjoined Marking Bullet Marking Bullet Colorful Bullet Clothing]


[Identification Bullet Protection Training Clothing] [Full Protection Color Bullet Training Clothing] [Identification Bullet Competition Protection Training Clothing]

National Competition Marking Bullet Identification Bullet Protective Clothing Color Bullet Training ClothingThe clothing standard complies with GA141-2010, and the outer layer of the protective clothing is made of 220g/square meter polyester blended fabric.


Mark the key protection areas of the colored bullet suit: chest, back, shoulders, collar, neckThe front lower abdomen, crotch, elbows, knee joints, chest, shoulders, abdomen, crotch, collar, front knee, and elbow pads are all reinforced with 6MM thick, 300g/square meter blended elastic fabric for protection. The 350mm area below the rear shoulder is reinforced with 4MM thick, 200g/square meter blended elastic fabric for protection.


The buttocks are reinforced with double-layer fabric for protection, and the crotch area is protected with engineering plastic injection molded protective componentsYStrengthen protection measures for the department.


The standard for the one-piece identification bullet colored bullet head helmet complies with GA293-2012 and GA294-2012. The helmet is a full face helmet with a fixed transparent face mask and neck protection. The helmet shell is made of engineering plastic and has breathable mesh distributed on the shell.

National Martial Arts CompetitionIdentification bomb protective equipment is a new type of protective equipment that simulates live ammunition for adversarial training; This protective equipment is suitable for both indoor and outdoor adversarial training; It has good practical protection effect in adversarial training, and there will be obvious marks and pain when hitting the opponent, but it will not pose a threat to the human body. Nowadays, many special forces and enforcement agencies in countries around the world are using this product for close combat training.