New standard third-generation fire protection equipment

New standard third-generation fire protection equipment

New standard third-generation fire protection equipmentIt should refer to firefighters conducting surveys, assessing the fire situation, searching for the source of the fire, or investigating the cause of the fire at the scene of the fire. Ordinary firefighting uniforms are different. Fire site investigation may be conducted after the fire has been brought under control, but there are still risks of high temperatures, harmful gases, and structural instability on site. So protective equipment needs to protect them from these hazards.

Third generation fire adjusted clothing

Fire scene investigation suit jacket and top, with the words "fire scene investigation" and fire investigation signs;

Fabric color: deep green; Fabric style: single line 1.5mm square jacquard polyester with four sided stretch and weft stretch mountaineering fabric; The fabric composition is polyester and spandex: polyester composition is not less than 90%;

The fabric density shall not be less than: weft (root/10cm) 440, warp (root/10cm) 460: fabric weight shall not be less than 157g/㎡;

Appearance: Reflecting the professionalism of fire investigation: Comfortable and loose chest circumference, chest marked with professional elements of fire investigation and fire investigation, slim waist, simple and windproof, tight cuffs and hem, front placket (net width 7cm, ± 0.2cm), stand collar, multiple pockets+bag cover (bag teeth width 2.2cm, ± 0.2cm, bag mouth with zipper) jacket, pure cotton lining, resin zipper and customized logo zipper rope;

Craftsmanship: Adopting conventional stitching techniques, with 0.1-0.6CM visible thread sewn onto the body, and tight stitching and wrapping techniques on the inside of the pants, with conventional stitching and edging treatment.

Pants fabric:

Deep enterprise youth; Fabric style: Single line 1.5MM checkered jacquard polyester four sided elastic fabric; The ingredients are polyester and spandex: the polyester component is not less than 90%;

Fabric density: weft (root/10cm) 440, warp (root/10cm) 460:

The weight of the fabric shall not be less than 157g/㎡;

Third generation fire adjusted clothingstyle

1. Adopting lightweight elastic grid fabric with strong wear resistance. Enhance the comfort of the fabric by adding lining fabric to the inner layer;

2. The fabric has moisture permeability function;

3. The elasticity of the waist side fabric adapts to the tightness and does not tighten the waist;

4. Zipper pocket design for secure storage, laser engraved metal buttons;

5. 6-8 pants loops, thickened and reinforced;

The assault suit has the words "fire scene inspection" and fire investigation signs.

The fabric composition level shall not be lower than: outer jacket: 100% polyester, TPU transparent film, excellent waterproof performance evaluation, water contact grade not lower than level 4 according to the implementation standard of GB/T 4745-2012, moisture permeability (before washing) requirement not lower than 3450g/m2/24h according to the implementation standard of GB/T 12704.2-2009, and anti splash treatment on the surface; Inner set: ultra-fine Yao particles, 100D/144F dual brush dual Yao, weight range 210-225g;

style

1. The outer shell and inner liner can be worn alone or in combination;

2. Waterproof and breathable fabric;

3. The seams of the outer jacket are fully glued to ensure that there is no water leakage at the seams;

4. Detachable three-dimensional windproof cap, adjustable on both the side and back center of the cap;

5. Adjustable elastic rope design at the hem;

6. The inner and outer jackets are designed with multiple zippered pockets, with a total quantity of no less than 9;

7. Outer jacket back pocket, size not less than 45cm * 18cm;

8. Sleeve Velcro+dual adjustment of elasticity;

9. Inner lining fleece fabric;

10. Inner liner elastic edging cuffs;