Oil drum heating with silicone 200L heater

Oil drum heating with silicone 200L heater

Technical performance:

Voltage and power: single-phase 220V/8KW (bucket body 7Kw, chassis 1KW).

Temperature control range: 50 ℃~300 ℃.

Appearance: Outer diameter 710 millimeters, inner diameter 610 millimeters, height 973 millimeters (including casters).

Weight: 80 kilograms.

Electrical strength: 1500V/1 minute

Insulation resistance:>1.5 Μ Ω

Heating time:

The heating time depends on various factors, such as the desired temperature inside the barrel, ambient temperature, properties of the heated substance, and the state that needs to be changed. Typical examples are as follows:

Water temperature ranges from 15 ℃ to 45 ℃ for 1 hour

Heavy oil from 20 ℃~60 ℃ for 2 hours

Heat Vaseline from 15 ℃ to melt (40 ℃~45 ℃) for 4 hours (with a temperature limit of 150 ℃)

Product Specifications

Parameters/Product Name	200L	200L	20L
size	250*1740mm	125*1740mm	200*860mm
voltage	220v2000w(220v3000w)	220v1000w	220v800w
Temperature Range	-20-250℃	-20-250℃	-20-250℃
temperature control accuracy	±1℃	±1℃	±1℃
weight	About: 0.65kg	About: 0.5kg	About: 0.55kg
barrel diameter	Diameter approximately: 580mm	Diameter approximately: 580mm	Diameter approximately: 300mm

Oil drum heating with silicone 200L heater

Instructions for use:

By heating, the liquid and solidified substances inside the bucket can be easily removed; Adhesive, grease, asphalt, paint, paraffin, oil, and various resin materials inside the barrel are heated by the barrel to evenly reduce their viscosity and reduce the power of the pump; The device is not affected by seasons and can be used year-round. Install sensors on the surface of the heating belt and directly control the temperature through temperature adjustment: the temperature adjustment range is 30-150 ℃. The temperature regulator is combined with a silicone heater, which is lightweight and easy to install with a metal buckle.

Introduction:

Oil drum heater, also known as oil drum heating belt or silicone rubber heater, is a type of silicone heating plate. Adopting the soft and bendable characteristics of silicone heating plates, metal buckles are riveted on the reserved holes on both sides of the heating plate, and fastened to the barrel, pipeline, and tank body with springs. Easy and fast installation. The silicone rubber heating plate can be tightly attached to the heated area by the tension of the spring, resulting in rapid heating and high thermal efficiency. The oil drum heating belt heats up the liquid and solidified materials inside the drum, such as adhesives, grease, asphalt, paint, paraffin, oil, and various resin materials. By heating the drum body, the viscosity is evenly reduced, reducing the power of the pump. Therefore, this device is not affected by seasons and can be used year-round. Surface mounted sensors can directly control temperature through temperature regulation.

Product Features:

1. Easy to operate: The bottom is equipped with universal wheels for movement, which can be directly moved to the site to heat the oil drum on site.

2. Safety of use: This product is equipped with a temperature control switch to control the inner wall temperature. When in use, it can be selected to adjust the constant temperature. Avoid accidents caused by overheating.

3. High thermal efficiency: The interior is uniformly equipped with electric heating plates and insulation layers, and a circular cover is added at the top to effectively reduce heat loss.

4. Cleaning and hygiene: As it is not an electric heating rod, steam tube, plug-in heating method, or external baking method, it avoids contamination of objects inside the bucket.

Intelligent temperature control oil drum silicon tape heater