The online gas analyzer TA200 is equipped with a touch control screen, allowing for one handed control of all operations; The calibration menu and alarm value settings are password controlled to prevent accidental operation; Configure zero point calibration, full-scale point calibration, and third point calibration to ensure good linearity; One click recovery of "factory settings" eliminates the need for factory repair after accidental operation
Online gas analyzerTA200 product features
TA200 is equipped with a touch control screen, allowing for one handed control of all operations
★ Three screen display slides back and forth to switch
Screen 1: Numerical status display, simultaneous display of concentration for three component gases
Screen 2: Detailed numerical display, concentration unit, temperature, pressure
Screen 3: Real time concentration curve display, with clear concentration changes in mind
★ Calibration menu and alarm value settings are password controlled to prevent accidental operation
★ Configure zero point calibration, full-scale point calibration, and third point calibration to ensure good linearity
★ Free selection of Chinese and English menus to meet various customer needs
★ One click restore to "factory settings", saving the process of returning to the factory for repair after accidental operation
★ Standard 19 inch chassis, rack mounted or desktop, can be selected for use in various industrial sites and laboratories for testing
★ The filter cannot be disassembled or replaced on site, making it suitable for various 24-hour non-stop industrial sites
Product Parameters
Project Content |
specific parameters |
Product Model |
TA200 |
Product Name |
Online gas analyzer |
detect gas |
Carbon monoxide, oxygen, sulfur dioxide, hydrogen sulfide, carbon dioxide, methane, nitrogen oxides (nitric oxide, nitrogen dioxide) (details by ITU) |
Detection Principle |
UV, IR, and electrochemistry (details available on ITU) |
resolution |
0.1ppm,1ppm, 0.01% or 0.1% VOL; Depending on the measurement range |
response time |
T90 < 2s (60l/h flow); T90<1s (180l/h flow) |
detection accuracy |
± 2% FS (conventional accuracy); ± 1% FS (high precision); |
intake air temperature |
0- 50℃ |
warm-up time |
About 2 minutes |
Gas flow influence |
<±0.5% FS / <±1% LDL |
temperature effect |
<±1% / 10k |
Gas pressure influence |
<±0.2% / 10hPa |
display data |
ppm, Vol.-%,mg/m3 |
communication interface |
RS232; GSM |
weight |
Approximately 10kg |
protection level |
IP42 (EN 60529) |
display |
4.3 "backlit touch screen |
Storage temperature |
-10℃ - 60℃ |
Operating Temperature |
5℃ - 45℃ |
atmospheric pressure |
760 – 1160 hPa |
Operating Humidity |
0-95% non condensing |
working power supply |
90 – 264 VAC 50/60Hz |
Product weight |
15KG |
Overall Dimensions |
577*512*255mm |