Quotation for one ton of coking agent for coal-fired boilers in Urumqi

Quotation for one ton of coking agent for coal-fired boilers in UrumqiCoke removal additive is a new, efficient, and safe furnace additive. It is composed of various components such as oxidants, catalysts, and high-temperature retention agents. Widely used in power plant boilers or other industrial and civilian boilers and kilns that burn lump coal and pulverized coal. Its main functions and characteristics include: 1. Energy saving and efficiency increasing: it has good oxygen supply and oxygenation effects. Suspended carbon particles and combustible gases can be fully burned, thereby reducing the carbon content of slag and combustible materials in fly ash, and improving combustion efficiency. Practice has proven that coal powder boilers can save coal by about 1.5% -3.5%. The chain furnace is more obvious, saving at least 3% -10% of coal. 2、 Desulfurization and pollution reduction: It can fully burn carbon monoxide into harmless carbon dioxide gas emissions. What is particularly valuable is that it can convert sulfur in coal into solid sulfides and discharge them with slag, greatly reducing the emission of sulfur dioxide gas, which causes great air pollution. According to departmental testing, the use of '998' additive can achieve a purification and desulfurization rate of about 20% -60% for boilers. Therefore, not only has it protected and improved the environment, reduced the payment of pollution fees, but it has also provided a broader market for some high sulfur coal, which has significant strategic significance. 3、 A special modifier contained in the prevention and removal of coking can remain in the furnace for a long time. On the one hand, it prevents the formation of coking, and on the other hand, it can adhere to the furnace wall and infiltrate the coking layer, gradually loosening and shedding the coking, greatly improving the heat conduction efficiency of the boiler, reducing the exhaust gas temperature, and maintaining the safe and economical operation of the furnace. 4、 The coal powder furnace is easy to use and can manually inject powder directly into the negative pressure port of the boiler coal feeder or the powder mill. For other kilns, powder can be bagged from the manhole door and thrown into the burning zone together with the small bag. The amount of additives used is extremely small, with an initial usage of 0.02% of the coal consumption, which takes about half a month to a month. Subsequently, only one ten thousandth of the coal consumption is required. Add every eight hours, with very little labor required; To use defocusing additives, simply spray the agent into the observation hole of the furnace, which is beneficial for the civilized production of the boiler workshop; After the coke removal additive is injected into the furnace, it quickly vaporizes and passes through the furnace, superheater, reheater, economizer, and air preheater with the flue gas flow until it is discharged, so there are no dead corners in coke removal.

Quotation for one ton of coking agent for coal-fired boilers in Urumqi