Road manual anti-collision hydraulic lifting column

Road manual anti-collision hydraulic lifting columnparameter
◆ Operating unit:Pneumatic hydraulic
◆ Total weight:60KG
◆ Diameter:168mm
◆ Circular tube thickness;3mmCustomizable6mmThe8,mm）
Surface treatment: polishing,Drawing or spraying
◆ Raise the height :600mm
◆ Pre embedded depth:800mm
◆ Rising control mode: key on, automatic rising
◆ Lowering method: After external force is pressed down to the bottom, the key is locked
◆ Reflective tape:high5cmReflective tape wrapped around the cylinder
◆ Operating noise:<60db
◆ Protection level:IP67

Road manual anti-collision hydraulic lifting columnSuitable for channel control systems with high safety and low frequency of use, for economic reasons, it is often used in conjunction with fully automatic lifting columns to provide higher safety protection and avoid complex strong and weak electrical construction. When the column size continues to increase with safety requirements, the shield protection semi-automatic lifting column contains an air pressure assist device that can bear larger loads.

The descent process of the semi-automatic lifting column is mainly achieved by the operator's own weight pressing down. When the top of the column reaches the ground level position, the mechanical lock locks and holds. The process of the column rising relies on the release effect of the internal air pressure assist device of the protective column itself. After releasing the mechanical lock with a key, the column does not need to apply external force and automatically reaches the initial position and locks and holds.

The product is widely used in urban transportation, pedestrian streets, highways, toll stations, airports, schools, banks, large clubs, parking lots, and many other occasions. By imposing restrictions on passing vehicles, traffic order and the safety of major facilities and places have been effectively ensured.
1Government unit gate: It can be controlled by electric, remote control, or card swiping to effectively prevent external vehicles from entering and illegal vehicles from entering.
2Pedestrian street: Install lift type roadblocks at pedestrian street intersections. The roadblocks are usually raised to restrict vehicle access. In case of emergency or special circumstances (such as fire, first aid, inspection, etc.), the roadblocks can be quickly lowered to facilitate vehicle passage.
3Road median: Elevating barriers can be used in non fully enclosed road median to prevent vehicles from making left turns or U-turns. In case of special circumstances such as road construction or road blockage, roadblocks can be set down to divert vehicles.
4Multi purpose square: During the day, roadblocks are raised and vehicles are prohibited from entering the square. At night, the square is used as a temporary parking lot, where roadblocks are lowered and vehicles can enter and park.
5Open park: Elevating barriers are installed at the intersection of the open park. The barriers are usually raised to prevent vehicles from passing, and visitors can freely pass through. In case of special circumstances, lower the lifting barrier to facilitate vehicle passage.
6Places such as residential areas, banks, schools, etc. that restrict vehicle access and ensure effective use of fire exits.
7Highway: Emergency road closure is required, and automatic lifting stakes can be used for convenience and speed, as well as to solve police problems.