Signal Converter M-System Love Model

Signal Converter M-System Love ModelMain functions and strengths
Provide power to a two-wire transmitter (output signal: 4-20mA DC) and convert the transmitted signal into an isolated DC signal
● Small terminal block structure
● Can be installed with high density

Machine Specifications
Construction: Small terminal disk construction
Connection method: M3.5 screw terminal connection (allowable torque of screw is 0.8N · m)
Terminal screw material: Nickel plated iron surface
Shell material: Black flame resistant resin
Isolation: input-output power supply room
Output range: approximately -10 to+110% (at 1-5V DC)
Zero adjustment range: -2% to+2% (adjustable from the front)
Range adjustment range: 98-102% (adjustable from the front)
Power display light: green LED, lights up when powered on

Power specifications for the use of 2-wire transmitters
Voltage range of power supply for 2-wire transmitter (between terminals ③ - ④):
24-28V DC (without load)
Above 18V DC (under 20mA DC load)
Current capacity: below 22mA DC
Short circuit protection circuit
Limit current: below 30mA
Allowable short-circuit time: infinite
Set specifications
power consumption
AC power supply: approximately 3VA
DC power supply: about 2W
Temperature range for use: -5 to+55 ℃
Humidity range: 0-90% RH (non condensing)
Installation: DIN rail installation
Weight: Approximately 80g

Performance (expressed as a percentage relative to range)
Standard accuracy: ± 0.1%
Temperature coefficient: ± 0.015%/℃
The impact of power supply voltage fluctuations: ± 0.1%/allowable voltage range
Insulation resistance: 100M Ω or above/500V DC
Isolation strength: input-output power ground connection
2000V AC for 1 minute (DC power supply)
1500V AC for 1 minute (AC power supply)

Signal Converter M-System Love Model