Suzhou tire blaster/Suzhou highway intersection speed bump tire tie

Suzhou tire blaster/Suzhou highway intersection speed bump tire tie

The embedded tire tying device can not only be applied to the management system of highway order, but also to the retrieval safety operation control system to achieve modernization of retrieval management and ensure the reliability of retrieval. Install embedded tire tie devices where needed, introduce scientific management concepts in monitoring and management work, and set up operation platforms with high scientific and technological content from various aspects. The embedded tire tie can elevate the level of monitoring and management to a higher level.

The embedded tire tying device adopts a mechanical transmission system, which has good operational control performance and emits low noise. The embedded tire tie has a very long service life and is not prone to problems. Even if there are some issues, it is very easy to repair. The embedded tire tie can operate under different conditions and can be manually controlled even in the event of a power outage. The embedded tire tie can also be used in conjunction with other electric control devices.

The principle of roadblocks is composed of thick PVC plastic as a movable support and stainless steel hard needles. Stainless steel needles have a central vent hole. After the puncture needle is inserted into the tire, the air inside the tire will quickly release from the central ventilation hole. When the wheel comes into contact with a stainless steel nail obstacle, due to the pressure during the journey, the wheel is pressed against the stainless steel nail on the obstacle. The stainless steel nail will follow the direction of the car's movement and pierce into the tire, causing the gas in the tire to leak out from the puncture hole. The intention of effectively stopping vehicles upon arrival.

The installation of the embedded tire tie transmission system complies with the various regulations of the Highway Law, which can strictly ensure the smooth operation of highway toll management. The embedded tire tie currently used is also a facility with humanized design. The highway management department must conduct large-scale publicity work on the embedded tire tying device before it is put into use, to ensure that passing vehicles can timely notice and warn drivers who intend to break through the post.
Suzhou tire blaster/Suzhou highway intersection speed bump tire tieTechnical Specifications:

Weight 1.5 tons
System Control: Electric Hydraulic
Power supply: three-phase 380 (control voltage 24V).

Roadblock machine with buffering function
System power output (w): 3.75KW.

Color: Multiple colors
Descent time: ≤ 1-3S (adjustable).

Under pressure, container trucks weighing less than 120 tons can pass through.
Working temperature: -35 ℃~75 ℃ (suitable).
Protection level: IP68

The structure is sturdy and durable, with a large load-bearing capacity, smooth movement, and low noise.
Buffer time: 0.2-0.5

Material: A3 steel, sprayed with anti rust primer.
In the event of a power outage, the barrier machine can be manually raised and lowered.

Rise time: ≤ 1-3S (adjustable).
Remote control distance: 50-100 meters (depending on the environment).

Material thickness: 16MM, 20MM, 25MM (optional).

Construction method of speed bump tire blaster:

Use expansion screws to secure the equipment;

Underneath the equipment chassis, pre embed pipelines (one 3 * 2.5 power cable and one 2 * 1.5 control cable);

Connect power debugging equipment;

Determine the installation location and correct the road surface smoothness;

Place the equipment, adjust its position and levelness;