Three beam infrared radiation

ABE-100/ABE-150/ABE-250Three beam infrared radiationFeatures

The 4-stage frequency conversion technology solves the problem of mutual interference between infrared radiation during installation under complex conditions.

The dual digital tube displays signal strength and can show small changes in the signal in real time, making debugging intuitive and convenient.

The infrared signal secondary processing function (comparable to AGC function) is more adept at dealing with adverse weather conditions such as wind, frost, snow, fog, tide, and direct sunlight.

Intelligent heating function, effective defrosting and ice removal, suitable for various temperature environments.

The alarm triggering time can be adjusted according to the needs of different environments and scenarios.

The auxiliary light calibration method used makes infrared light calibration more efficient.

ABE-100/ABE-150/ABE-250Three beam infrared radiationTechnical Specifications

Model: ABE-100/ABE-150/ABE-250

Outdoor warning distance: 100m/150m/250m

Indoor warning distance: 300m/450m/750m

Maximum communication distance: 600m/900m/1500m

Current consumption: 80mA max/90mA max/110mA max

Detection method: simultaneous interruption of three beams

Interruption time: 50ms, 100ms, 300ms, 700ms (toggle switch selection)

Power supply voltage: DC9-30V/AC9-20V

Alarm cycle: ≥ 1.5s

Power supply and voltage: DC11-18V, current 50-90mA (Max)

Beam frequency: 4 options (transmitter and receiver must be set to the same frequency)

Alarm output: Relay contact output 1C, contact capacity AC/DC30V 1A max

Anti disassembly output: normally closed, opens when the casing is removed

Protection level: IP65

Working temperature: -25 ℃~55 ℃

Environmental humidity: 95%

Correction angle: Horizontal 180 ° (± 90 °), Vertical 20 ° (± 10 °)

Installation location: indoor/outdoor, wall/pole installation

Weight (transmitter+receiver): 1670g

Size: 91 × 92 × 291mm

attachment

U-shaped bracket: 4 pieces, 70.4mm * 37.5mm * 21.5mm, thickness 1.5mm, stainless steel

Installation screws for pole: 8 pieces, PM4*30mm

Wall installation screws: 8, PA4*25mm

Expansion tubes: 8, Φ7*27mm， green

Heater (optional)

Power supply: 12V-24VDC/AC

Current: 200mA max per piece

Maximum operating temperature:+70 ℃

remark

When the ambient temperature is below -20 ℃, please use the optional "heater", and there is no polarity requirement for the leads at both ends of the heater.