Three box thermal shock test chamber

NegotiableUpdate on 09/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product use: The three box cold and hot shock test chamber is an essential testing equipment in the metal, plastic, rubber, electronics and other material industries. It is used to test the material structure or composite materials, and can withstand continuous environments of extremely high and low temperatures in an instant. It can detect chemical changes or physical damage caused by thermal expansion and contraction of the sample in a short period of time.

Product Details

Device Model	Studio size (D * W * H) mm	Dimensions (D * W * H) mm
LRHS-100A-LW	450×500×450	1700×1440×1900
LRHS-150A-LW	500×600×500	1750×1540×2115
LRHS-225A-LW	750×600×500	2200×1540×2115
LRHS-320A-LW	800×800×500	2400×1740×2050
LRHS-500A-LW	1000×900×550	2600×1840×2080

Technical Specifications

Sales Hotline: 021-608 99999

sex can point mark	Impact temperature range	A：-45℃～150℃ B：-55℃～150℃ C：-65℃～150℃
	High temperature box temperature	RT~180 ℃ (unloaded)
	Low temperature box temperature	RT~-60 ℃ (unloaded)
	temperature fluctuation	≤ 1 ℃ (when unloaded)
	temperature deviation	± 3 ℃ (when unloaded)
	heating rate	From room temperature to 150 ℃ ≤ 25 minutes (average throughout the entire process)
	降温速率	From room temperature to -60 ℃ ≤ 50min (average throughout the entire process)
	Temperature recovery time	≤5min
	Time setting range	1～60000M
	test hole	Used for external testing of power or signal lines
make use material material	outer box material	High quality A3 steel plate electrostatic spraying
	Inner box material	Imported high-grade stainless steel SUS304
	Insulation material	Rigid polyurethane foam+glass fiber
nucleus heart match place	Temperature Controller	Imported "Youyi Control" brand temperature instrument
	temperature sensor	PT100 platinum resistance thermometer
	Cooling method	Double machine cascade refrigeration
	compressor	French Taikang Compressor/German Bitzer Compressor
Standard Configuration		Sample rack with 2 layers, equipped with condensate water collection tray, and discharged outside the box
safety protection		Compressor overpressure overload, overtemperature, leakage protection, fan motor overheating Overall equipment under phase/reverse phase overall equipment timing, overload, and short circuit protection
power supply voltage		AC380V±10% 50Hz
Power		(A) 17.0kW/22.0kW/25.0kW 53.0kW/72.0kW
Usage environment		5℃～＋28℃ ≤85% RH
Note: 1. The above data were measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. Customized cold and hot shock test chambers can be customized according to specific testing requirements of users 3. This technical information is subject to change without prior notice