Torque testing wrench SGSX | 0.3-2N. m torque testing wrench

Torque testing wrench SGSX | 0.3-2N. m torque testing wrench

The SGSX series test sold by Henggang manufacturerTorque wrenchIt is a tool for bolt tightening detection and controlThis SGSXWrench for testing torqueFeaturing high precision, accurate measurement, stable performance, low power consumption, simple operation, and interchangeable head（Replace the ratchet head, open the mouth, move the opening head, hook head, pipe clamp head, and plum blossom head）Such characteristics are widely applicable to industries such as automobiles, motorcycles, and machinery manufacturingBolt tightening detection and control.

Wrench for testing torque Speak orally

Wrench for testing torqueSpecification Model

Wrench for testing torquePicture ratchet

Wrench for testing torque Speak orally

Wrench for testing torque plum blossom head

Wrench for testing torque Pipe clamp head

Wrench for testing torquehookhead

Wrench for testing torqueHexagonal head inside

Wrench for testing torquebelt buckle

Wrench for testing torqueBottle cap head

Wrench for testing torque discrete signal

Wrench for testing torqueFeatures:

1. Power on self-test and automatic zeroing;Panel based software calibration and bidirectional linear correction;

2. Automatic shutdown after two minutes of no signal; Storage function for 300 sets of data;

3. Torque direction and undervoltage indication;

4. Anti corrosion buttons, low power consumption, and long-term stability design;

5. Switching between three measurement units (N.m, lbf. ft, lbf. in);

6. Three types of workMode (peak, tracking, preset) switching；

7. Set any alarm value with sound and light alarms;

8. Backlight display, the backlight will light up when there are buttons or significant value changes, and it will automatically turn off after 20 seconds of no operation;

Wrench for testing torqueInstructions:

1. Rotate the battery cover at the back and insert two No. 5 batteries facing forward, then tighten the battery cover;

2. Short press the "O/C" button to turn on the power, the LCD display will show characters, the wrench will start self checking, and after 3 seconds, it will reset to zero;

3. Unit selection, press "▼" to select the desired measurement unit;

4. Measurement method selection: Press the "M" key to select the "Tracking F" or "Peak H" mode;

5. Torque value alarm preset: Press the "M" and "preset P" modes, then press the "P" key to determine the required preset torque value, press the "▲" and "▼" keys to determine the required preset alarm value, and after the preset is completed, press the "M" key to exit the preset mode and return to the "tracking F" state, or press the "M" key again to enter the "peak H" state.

6. Zeroing: Before measurement, place the wrench in a natural horizontal unloaded state and press the "O/C" key to clear the existing displayed values, making the current state "zero position".

7. Measurement

a、 Tracking measurement: Press the "M" key to place the wrench in the "tracking F" state. In this state, the measurement displays the immediate torque value. When applying force, the torque value increases, when reducing force, the torque value decreases, and when not applying force, the torque value returns to the "zero position". Press the "S" key in this state to select the "backlight" on/off mode.

b、 Peak measurement: Press the "M" key to place the wrench in the "peak H" state, which records the peak torque. When applying force, the torque value increases, and when reducing force, the torque value remains unchanged. When continuing to apply force greater than the current torque, the value will continue to increase, that is, this state records the maximum torque value applied. After unloading the force, the value remains unchanged. Press the "S" key in this state, and the current value will be stored in the memory for querying the recorded torque value after measurement is completed.

C、 The preset measurement is in the "tracking F" or "peak H" state. When the applied force reaches the preset torque value, the alarm lights up and there is a "peak sound" alarm prompt. At this time, the applied force can be stopped. After unloading the force, press the "O/C" key to exit the alarm state.

Our company does not provide warranty coverage:

Product damage caused by personnel factors, such as improper installation, use, or storage leading to malfunctions, is not covered by warranty

Product damage caused by failure to follow the product manual is not covered by warranty

Due to environmental issues such as natural disasters, geological changes, and external reasons, we do not provide warranty coverage

Damage caused by unauthorized disassembly of the product by the customer is not covered by warranty

The warranty period for the battery in the product is only three months, and there is no warranty after three months.

Our company also sells:Tester for measuring wrench torque Hand pushed dial tensile tester Button tensile tester Various specifications and models of torque wrenches Install electric torque wrench Digital dynamometer CHATILLON Push Force Scale Pressure gauge Portable push-pull force gauge Electronic tensile tester Remote controlled tensile tester Instrument for measuring tensile strength Reinforcement tightening manual digital torque wrench Construction site electric wrench Digital force gauge Large scale push-pull force gauge Digital tension gaugeTorque wrench with display

Torque testing wrench SGSX | 0.3-2N. m torque testing wrench