-
E-mail
hebeiyiqu@qq.com
-
Phone
15127693765
-
Address
Liuyanma Industrial Zone, Dacheng County, Langfang City, Hebei Province
Product Categories
Tianjin Cable Factory Rubber and Plastic Cable Factory (Tianjin Cable Cat Group)
UGFP High Voltage Cable 6/10kv-3x50+3x16/3
NegotiableUpdate on 02/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
UGFP high-voltage cable 6/10kv-3x50+3x16/3; Mining cable is the abbreviation for flame-retardant cable used in coal mines. According to the industry standard "Flame retardant cables for coal mines" issued by the State Administration of Coal Industry, the naming content of mining cables, that is, the meaning of the model of mining cables, is as follows.
Product Details
UGFP High Voltage Cable 6/10kv-3x50+3x16/3
1. Model and name:
UGF-6000V mining rubber sheathed flexible cable UG-6000V mining rubber sheathed flexible cable
2 Execution standard: TL/J30-94
3. Cable usage: Mobile power distribution equipment and mining machinery with AC rated voltage of 6kV and below; Copper core rubber insulated rubber sheathed flexible cable for lifting and transportation machinery.
4 Usage characteristics:
The rated voltage of the cable is 6kV; the long-term operating temperature of the cable is+65 ℃.
The minimum bending radius of a cable is 6 times the diameter of the cable.
The chloroprene rubber or mixed rubber mainly composed of chloroprene rubber used for cable sheath shall not be tested for oil resistance and non flammability.
5 Technical performance:
The direct current resistance of the conductor at 20 ℃ is shown in the table above.
The insulation resistance between finished cable cores, converted to a length of 1km and a temperature of 20 ℃, should not be less than 100 megaohms.
The main cores of the finished cable and between the main cores and the grounding wire should be able to withstand an AC voltage test of 50 Hz 15000 volts for 5 minutes without breakdown.
UGFP High Voltage Cable 6/10kv-3x50+3x16/3
1、 The naming of cables consists of eight parts: the first part is the series code M, which is the first letter of the pinyin of the coal character; The second part is the use of characteristic codes, reflecting the occasions in which the cable is used. The meaning of the letters is as follows: C, used for coal mining machines; D， Used in low-temperature environments; M， Used for hat lamps; Y， For mobile coal mining equipment; Z， Used for electric drills.
The third part is the structural feature code, which represents the structural features of the cable. The meaning of the letters is as follows: B, weaving reinforcement; J， Equipped with monitoring cores; P， Non metallic shielding; PT， Metal shielding; Q， Lightweight; R， Strengthen the wrapping.
The fourth part is the material characteristic code, represented by E indicating that the insulation or sheath is made of elastic material. When both insulation and sheath are made of rubber, this section is omitted. E， Elastic material.
The fifth part is the rated voltage U0/U (KV).
The sixth part represents the number of power wire cores multiplied by the nominal cross-sectional area. The two are connected by a multiplication sign, with the unit being square millimeters.
The seventh part represents the number of ground wire cores multiplied by the nominal cross-sectional area. The two are connected by a multiplication sign, with the unit being square millimeters.
The eighth part represents the number of auxiliary wire cores multiplied by the nominal cross-sectional area. The two are connected by a multiplication sign, with the unit being square millimeters.
Connect the fourth and fifth parts with a "-"; Connect the sixth, seventh, and eighth parts with a "+".
Similar Product Recommend
