Waterproof, explosion-proof, temperature controlled heating device

Waterproof, explosion-proof, temperature controlled heating deviceIt is composed of metal tubular electric heating elements, stainless steel (iron) protective covers, temperature controllers and other main materials and components. Its characteristics are: no noise, no smoke, odorless, uniform temperature control and no dryness sensation during heating. It has the characteristics of low heat load, long service life, no maintenance and repair requirements, high mechanical strength, easy installation, beautiful appearance, and safe use.

Waterproof, explosion-proof, temperature controlled heating deviceUsed for winter heating and insulation in outdoor work vehicles, power transmission and transformation stations, activity board rooms, hotels, laboratories, operating rooms, factory interiors, and warm rooms, as well as distribution cabinets and dehumidification heating.

2、 Technical standards

1. Heating equivalent (1KW) 860 kcal/h

2. Use space of 10 cubic meters/KW

3. Insulation resistance (cold state) ≥ 10 Ω

4. Withstand voltage test passed at 1500V/min

5. Temperature control range: 0 ℃ -30 ℃

6. Service life>5000h (continuous use)

3、 Installation and usage methods

1. The four corners of the heater are equipped with fixed installation holes, and two holes can be selected from each corner with three holes. First, install the heater on a bracket (the bracket form is designed by the user), and then fix it on the wall. The installation position should keep any wall at 10cmDistance to prevent wall aging caused by long-term use.

2. Fix the temperature controller on the wall, with a distance of at least 100mm from the heater to prevent false operation of the temperature controller. Connect the power supply to the temperature controller according to the wiring diagram, then connect the output hole of the temperature controller to the ceramic connector of the heater with a wire, and connect the ground wire to ensure safety.

3. After connecting the power supply, install the cover of the wiring terminal, adjust the temperature knob to the desired temperature scale, and adjust the switch knob to level II. When the indoor temperature is lower than the desired temperature, the power supply will automatically turn on and the heater will work. When the indoor temperature reaches the desired temperature, the power supply will automatically turn off and the heater will stop heating. The selection switch is divided into five levels. Level II is for two heaters to work simultaneously. RI and RII each refer to one electric heating plate and have corresponding settingsThe signal light displays that OFF is the off position.

4、 Precautions

1. The relative humidity of the working environment of the heater should be less than 85%

2. It is strictly prohibited to store and use in flammable and corrosive environments

3. It is strictly prohibited to place the heater directly under the power socket

4. It is strictly prohibited to place flammable, explosive, or humid items on the heaterTo prevent accidents from happening above.

5. Do not use in the bathroom. If you need to use it, please order a waterproof heater from our factory.

5、 After sales service

1. All products produced by our company are covered by the "three guarantees" policyAnd provide all technical and service consulting

2. If users require special specifications and technologies, please contact our technical department,The company will wholeheartedly satisfy