Which is a good school for semi-automatic lifting piles

NegotiableUpdate on 02/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

School semi-automatic lifting piles are often suitable for channel control systems with high safety and low frequency of use. Due to economic considerations, they are often used in conjunction with fully automatic lifting columns to provide higher safety protection and avoid complex strong and weak electrical construction. As the size of the column increases with safety requirements, the built-in pneumatic assist device can bear larger loads. Which is a good school for semi-automatic lifting piles

Product Details

School semi-automatic lifting pileIt is mainly achieved by the operator's own weight pressing down. When the top of the column reaches the ground level position, the mechanical lock locks and holds. During the process of the column rising, it relies on the release effect of the internal air pressure assist device of the protective column itself. After using the key to release the mechanical lock, the column does not need to apply external force and automatically reaches the initial position and locks and holds. （Which is a good school for semi-automatic lifting piles）

Technical Specifications:
◆ Operating unit:Pneumatic hydraulic
◆Total weight:65KG
◆Diameter:219mm
◆ Circular tube thickness; 3mm (customizable 6mm, 8mm)
◆Surface treatment: Polishing, brushedOr spray coating
◆ Lift outheight:600mm
◆ Pre embedded depth: 800mm
◆riseControl method：Key opening, automatic ascent
◆declinemethod：After being pressed to the bottom by external force, the key locks
◆Reflective tape:High 5cmReflective tape wrapped around the cylinder
◆Operating noise:<60db
◆Protection level: IP67

（Which is a good school for semi-automatic lifting piles）