XBD-GDL vertical multi-stage pipeline fire pump

The XBD-GDL vertical multi-stage pipeline fire pump is a new generation of medium and low pressure fire pump set product developed by our company based on the XBD-L type according to the new standard requirements of fire pumps. Used for transporting clean water without solid particles and liquids with physical and chemical properties similar to water. Suitable for fire water supply in various occasions such as residential buildings, hotels, office buildings, commercial buildings, factories, hospitals, etc.

The significance of XBD-GDL vertical multi-stage pipeline fire pump model

1. The hydraulic model is advanced, efficient, and has a wide range of performance.
2. Vertical structure, small footprint.
3. Using high-quality bearings, it has low vibration, low noise, smooth operation, and is safe and reliable.
4. The inlet and outlet of the pump are on the same horizontal axis and have the same diameter specifications, making it easy to connect pipelines and facilitate loading and unloading.
5 supporting facilities and other occasions.

1. The medium used should be similar to water, with a kinematic viscosity of<150mm2/s, no hard particles, and no corrosive properties;
2. The environment where the pump is used has an altitude of less than 1000 meters. If it exceeds this altitude, it should be raised during the order process so that our factory can provide you with more reliable products;
3. Medium usage temperature -15 ℃~120 ℃;
4. System working pressure ≤ 2.5MPa;
5. The ambient temperature should be below 40 ℃ and the relative humidity should be below 95%.

1. The hydraulic model is advanced, efficient, and has a wide range of performance.
2. Vertical structure, small footprint.
3. Low vibration and noise, using hydraulic balance axial force to ensure smooth and safe operation of the pump.
4. The inlet and outlet of the pump are on the same horizontal axis and have the same diameter specifications, making it easy to connect pipelines and facilitate loading and unloading.

Structural diagram of XBD-GDL vertical multi-stage pipeline fire pump

1. The pump is a vertical, multi-stage segmented structure, with the inlet and outlet flanges on the same straight line. The impeller uses hydraulic balance to balance the axial force. There is a guide bearing at the lower end of the pump, and the shaft is fixed to the motor shaft through a clamp coupling. The outer cylinder is made of stainless steel.
2. The shaft seal adopts mechanical seal.
3. The pump is driven by a motor, and when viewed from the motor end, the pump rotates clockwise.
4. The pump outlet is equipped with an exhaust valve (nozzle) to ensure that the gas inside the pump can be completely discharged.
5. The impeller can be made of bronze material to avoid rust between the impeller and guide vanes after long-term shutdown.

Installation dimension diagram of XBD-GDL vertical multi-stage pipeline fire pump

model	H1	L	B	4-φd1	Imported flange (J)
					DN	N-φD2	φD
XBD**/**-（I）25×*	60	300	200	4-φ18	25	4-φ14	85
XBD**/**-（I）40×*	80	360	235	4-φ18	40	4-φ18	110
XBD**/**-（I）50×*	100	360	235	4-φ18	50	4-φ18	125
XBD**/**-（I）65×*	110	360	235	4-φ18	65	4-φ18	145
XBD**/**-（I）80×*	130	420	300	4-φ18	80	8-φ18	160
XBD**/**-（I）100×*	160	520	350	4-φ18	100	8-φ18	180
XBD**/**-（I）125×*	160	500	400	4-φ18	125	8-φ18	210
XBD**/**-（I）150×*	180	600	400	4-φ18	150	8-φ22	245

model	series	traffic		head (M)	speed (r/min)	Motor power (kw)	efficiency （%）	Required cavitation allowance (NPSH)	weight
		(L/s)	(m3/h)
XBD3.60/0.56-(I)25×3	3	0.39 0.56 0.67	1.4 2 2.4	36	2900	1.1	23 30 32	2.9	58
XBD4.80/0.56-(I)25×4	4			48	2900	1.1		2.9	62
XBD6.00/0.56-(I)25×5	5			60	2900	2		2.9	68
XBD7.20/0.56-(I)25×6	6			72	2900	2		2.9	72
XBD8.40/0.56-(I)25×7	7			84	2900	2		2.9	78
XBD9.60/0.56-(I)25×8	8			96	2900	2.2		2.9	82
XBD10.8/0.56-(I)25×9	9			108	2900	2		2.9	86
XBD12.0/0.56-(I)25×10	10			120	2900	3		2.9	98
XBD13.2/0.56-(I)25×11	11			132	2900	3		2.9	102
XBD14.4/0.56-(I)25×12	12			144	2900	3		2.9
XBD15.6/0.56-(I)25×13	13			156	2900	4		2.9
XBD16.8/0.56-(I)25×14	14			168	2900	4		2.9
XBD18.0/0.56-(I)25×15	15			180	2900	4		2.9
XBD3.3/1.11-(I)25×3	3	0.78 1.11 1.33	2.8 4 4.8	33	2900	1.1	32 42 43	2.9	58
XBD4.4/1.11-(I)25×4	4			44	2900	1.5		2.9	65
XBD5.5/1.11-(I)25×5	5			55	2900	2.2		2.9	72
XBD6.6/1.11-(I)25×6	6			66	2900	2.2		2.9	76
XBD7.7/1.11-(I)25×7	7			77	2900	3		2.9	86
XBD8.8/1.11-(I)25×8	8			88	2900	3		2.9	90
XBD9.9/1.11-(I)25×9	9			99	2900	3		2.9	94
XBD11/1.11-(I)25×10	10			110	2900	4		2.9	110
XBD12.1/1.11-(I)25×11	11			121	2900	4		2.9	114
XBD13.2/1.11-(I)25×12	12			132	2900	4		2.9
XBD14.3/1.11-(I)25×13	13			143	2900	4		2.9
XBD15.4/1.11-(I)25×14	14			154	2900	5.5		2.9
XBD16.5/1.11-(I)25×15	15			165	2900	5.5		2.9
model	series	traffic		head (M)	speed (r/min)	Motor power (kw)	efficiency （%）	Required cavitation allowance (NPSH)	weight
		(L/s)	(m3/h)
XBD3.6/1.67-(I)40×3	3	1.17 1.67 2.00	4.2 6 7.2	36	2900	1.5	43 52 50	2.9	72
XBD4.8/1.67-(I)40×4	4			48	2900	2.2		2.9	78
XBD6.0/1.67-(I)40×5	5			60	2900	2.2		2.9	82
XBD7.2/1.67-(I)40×6	6			72	2900	3		2.9	92
XBD8.4/1.67-(I)40×7	7			84	2900	3		2.9	96
XBD9.6/1.67-(I)40×8	8			96	2900	4		2.9	112
XBD10.8/1.67-(I)40×9	9			108	2900	4		2.9	116
XBD12.0/1.67-(I)40×10	10			120	2900	4		2.9	120
XBD13.2/1.67-(I)40×11	11			132	2900	5.5		2.9	140
XBD14.4/1.67-(I)40×12	12			144	2900	5.5		2.9
XBD15.6/1.67-(I)40×13	13			156	2900	7.5		2.9
XBD16.8/1.67-(I)40×14	14			168	2900	7.5		2.9
XBD18.0/1.67-(I)40×15	15			180	2900	7.5		2.9
XBD3.0/3.33-(I)50×2	2	2.33 3.33 4.00	8.4 12 14.4	30	2900	2.2	49 57 55	3.5	113
XBD4.5/3.33-(I)50×3	3			45	2900	3		3.5	129
XBD6.0/3.33-(I)50×4	4			60	2900	4		3.5	149
XBD7.5/3.33-(I)50×5	5			75	2900	5.5		3.5	181
XBD9.0/3.33-(I)50×6	6			90	2900	5.5		3.5	190
XBD10.5/3.33-(I)50×7	7			105	2900	7.5		3.5	204
XBD12/3.33-(I)50×8	8			120	2900	7.5		3.5	212
XBD13.5/3.33-(I)50×9	9			135	2900	11		3.5	265
XBD15/3.33-(I)50×10	10			150	2900	11		3.5	273
XBD3/5-(I)50×2	2	3.50 5.00 6.00	12.6 18 21.6	30	2900	3	54 63 62	4.0	122
XBD4.5/5-(I)50×3	3			45	2900	4		4.0	142
XBD6.0/5-(I)50×4	4			60	2900	5.5		4.0	175
XBD7.5/5-(I)50×5	5			75	2900	7.5		4.0	189
XBD9.0/5-(I)50×6	6			90	2900	7.5		4.0	198
XBD10.5/5-(I)50×7	7			105	2900	11		4.0	252
XBD12/5-(I)50×8	8			120	2900	11		4.0	261
XBD13.5/5-(I)50×9	9			135	2900	15		4.0	280
XBD15/5-(I)50×10	10			150	2900	15		4.0	289
model	series	traffic		head (M)	speed (r/min)	Motor power (kw)	efficiency （%）	Required cavitation allowance (NPSH)	weight
		(L/s)	(m3/h)
XBD2.4/10-(I)65×2	2	5.00 6.67 8.00	18 24 28.8	24	2900	3	54 63 62	4.0	122
XBD3.6/10-(I)65×3	3			36	2900	4		4.0	142
XBD4.8/10-(I)65×4	4			48	2900	5.5		4.0	175
XBD6.0/10-(I)65×5	5			60	2900	7.5		4.0	189
XBD7.2/10-(I)65×6	6			72	2900	7.5		4.0	252
XBD8.4/10-(I)65×7	7			84	2900	11		4.0	261
XBD9.6/10-(I)65×8	8			96	2900	11		4.0	280
XBD10.8/10-(I)65×9	9			108	2900	15		4.0	289
XBD12/10-(I)65×10	10			120	2900	15		4.0	20
XBD13.2/10-(I)65×11	11			132	2900	15		4.0
XBD14.4/10-(I)65×12	12			144	2900	18.5		4.0
XBD2.4/15-(I)80×2	2	7.00 10.00 12.00	25.2 36.0 43.2	24	2900	4	59 71 70	4.2	193
XBD3.6/15-(I)80×3	3			36	2900	5.5		4.2	227
XBD4.8/15-(I)80×4	4			48	2900	7.5		4.2	244
XBD6.0/15-(I)80×5	5			60	2900	11		4.2	292
XBD7.2/15-(I)80×6	6			72	2900	11		4.2	302
XBD8.4/15-(I)80×7	7			84	2900	15		4.2	322
XBD9.6/15-(I)80×8	8			96	2900	15		4.2	332
XBD10.8/15-(I)80×9	9			108	2900	18.5		4.2	365
XBD12/15-(I)80×10	10			120	2900	18.5		4.2	375
XBD2.8/20-(I)100×2	2	10.00 15.00 18.06	36 54 65	28	2900	7.5	62 73 71	4.0	218
XBD4.2/20-(I)100×3	3			42	2900	11		4.0	267
XBD5.6/20-(I)100×4	4			56	2900	15		4.0	287
XBD7.0/20-(I)100×5	5			70	2900	18.5		4.0	320
XBD8.4/20-(I)100×6	6			84	2900	18.5		4.0	330
XBD9.8/20-(I)100×7	7			98	2900	22		4.0	373
XBD11.2/20-(I)100×8	8			112	2900	30		4.0	400
XBD12.6/20-(I)100×9	9			126	2900	30		4.0	421
XBD14/20-(I)100×10	10			140	2900	37		4.0	432
model	series	traffic		head (M)	speed (r/min)	Motor power (kw)	efficiency （%）	Required cavitation allowance (NPSH)	weight
		(L/s)	(m3/h)
XBD2.8/20-(I)100×2	2	14.00 20.00 24.00	50.4 72 86.4	28	2900	11	64 73 71	4.5	276
XBD4.2/20-(I)100×3	3			42	2900	15		4.5	298
XBD5.6/20-(I)100×4	4			56	2900	18.5		4.5	336
XBD7.0/20-(I)100×5	5			70	2900	22		4.5	381
XBD8.4/20-(I)100×6	6			84	2900	30		4.5	453
XBD9.8/20-(I)100×7	7			98	2900	30		4.5	466
XBD11.2/20-(I)100×8	8			112	2900	37		4.5	493
XBD12.6/20-(I)100×9	9			126	2900	37		4.5	582
XBD14/20-(I)100×10	10			140	2900	45		4.5	595
XBD4.0/30-(I)125×2	2	20.83 30.00 36.11	75 108 130	40	2900	18.5	65 74 72	4.5	292
XBD6.0/30-(I)125×3	3			60	2900	30		4.5	430
XBD8.0/30-(I)125×4	4			80	2900	37		4.5	463
XBD10.0/30-(I)125×5	5			100	2900	45		4.5	555
XBD12.0/30-(I)125×6	6			120	2900	55		4.5	640
XBD14.0/30-(I)125×7	7			140	2900	75		4.5	840
XBD16.0/30-(I)125×8	8			160	2900	75		4.5	855
XBD18.0/30-(I)125×9	9			180	2900	90		4.5	870
XBD20.0/30-(I)125×10	10			200	2900	90		4.5	955
XBD4.0/45-(I)150×2	2	30.00 45.00 53.89	108 162 194	40	2900	30	69 78 77	4.5	422
XBD6.0/45-(I)150×3	3			60	2900	37		4.5	452
XBD8.0/45-(I)150×4	4			80	2900	55		4.5	613
XBD10.0/45-(I)150×5	5			100	2900	75		4.5	820
XBD12.0/45-(I)150×6	6			120	2900	75		4.5	836
XBD14.0/45-(I)150×7	7			140	2900	90		4.5	922