YL-HP10-10S SAFT Adhesive Tape Shear Failure Temperature Tester

Execution standard: GB/T 36794-2018

SAFT Terminology Analysis

When the specimen is loaded with a certain standard mass, the upper limit temperature that the bonding area can withstand when shear failure occurs is the shear failure temperature SAFT.

Test Principle

By controlling the heating rate of the oven, the time required for the adhesive tape specimen to fail due to sticking is measured, and then the shear failure temperature is calculated.

Specifications

1. Analysis accuracy of the constant temperature chamber: 0.1 ° C;

2. Sample cutting blade: width 24MM;

3. Test area: 24 mmX24 mm;

4. Test board: 72 mm in length and 50 mm in width;

5. Manual or electric rolling wheels (purchased separately);

6. The temperature timing accuracy is 0.5 minutes;

7. The starting temperature is 40 ° C;

8. Test load: 1KG or 0.5KG, a total of 9 pieces;

9. Temperature range: normal temperature+5 ° C~300 ° C;

10. Temperature uniformity: ± 1 ° C;

11. Temperature control system: touch screen type, can set time, temperature, speed, and can set different temperature range program group testing methods;

12. Number of testing groups: A total of 9 groups, with each group timed separately and staggered in front and back;

13: Internal 304 stainless steel, external advanced powder coating treatment;

14. Power supply: 220V 2KW