YN-100B pressure gauge -0.1-0MPa M20&# 215; 1.5 Radial

NegotiableUpdate on 02/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YN-100B pressure gauge -0.1-0MPa M20 The 1.5 radial gauge is based on a regular pressure gauge, with a fully enclosed case structure filled with damping fluid (usually glycerin or silicone oil) and equipped with a buffering mechanism to reduce the impact of severe environmental vibrations and medium pulses on the instrument readings. The shock resistant pressure gauge has stable and clear indications. Widely used in hydraulic machinery, petroleum, chemical, metallurgical, mining machinery, power equipment and other departments to measure the pressure of non corrosive media on copper and copper alloys.

Product Details

YN-100B pressure gauge -0.1-0MPa M20 × 1.5 radialHas good anti vibration performance, especially suitable for working environments with mechanical vibration and medium pulsation. The shock resistant pressure gauge can measure the pressure of liquids, gases, vapors, and other media that are non explosive, non crystalline, non solidifying, and do not corrode copper alloys.
YN-100B pressure gauge -0.1-0MPa M20 × 1.5 radialSpecification Diagram

□	-	□	□	□	□
YN 系列耐震压力表	-	60- The diameter of the pressure gauge is 60 millimeters 100- The diameter of the pressure gauge is 100 millimeters 150- The diameter of the pressure gauge is 150 millimeters 200- The diameter of the pressure gauge is 200 millimeters	Z-axis	T with edge	Q in front

Main technical parameters

Product Model	YN-60	YN-100	YN-150	YN-200
nominal diameter	F60	F100	F150	F200
threaded joint	M14×1.5	M20×1.5
Accuracy level	1.5； two point five	1.0； one point five
Measurement range (MPa)	-0.1~0； -0.1~0.06； -0.1~0.15； -0.1~0.3； -0.1~0.9； -0.1~1.5； -0.1~2.4； 0～0.1； 0～0.16； 0～0.25； 0～0.4； 0～0.6； 0～1； 0～1.6； 0～2.5； 0～4； 0～6； 0～10； 0～16； 0～25； 0～40； 0～60；
Vibration resistance level	V.H.4
Environmental conditions for use	Temperature -40~70 ℃; Relative temperature ≤ 85%

Usage and ordering instructions:
During use, if the ambient temperature is too high and the instrument reading does not return to zero, a small hole can be made in the instrument rubber stopper with a thin needle to allow the instrument chamber to communicate with the atmosphere.
The working environment should be free of corrosive gases.
Please specify the name, model, measurement range, and connecting thread when placing an order.
When the temperature of the measured medium exceeds 55 ℃, a condenser tube can be installed to reduce the temperature of the medium, minimize additional temperature errors, and ensure measurement accuracy