Thin layer color developing heater/CNC thin layer color developing heater M208989 instruction manual

• Product Usage

1. Thin layer plate color development heating
2. Thin layer plate heating point sample
3. Thin layer board drying activation

• Product Features

1. Adopting digital temperature control, accurate display, intuitive observation
2. Uniform heating, easy operation, and use

• product metrics

1. Power supply: 220V, 50HZ
2. Heating power: 1000W
3. Working area: 250×300mm
4. Heating range: 0-300 ℃
5. Heating accuracy: ± 1 ℃

• operating procedure

1. Connect the power and turn on the power switch;
2. Press the SET button to set the temperature. Press the SET button to flash the data on the digital display in the lower row (normal temperature measurement in the upper row), indicating that the instrument has entered the temperature setting state. Press△The key setting value increases, press▽The key setting value decreases. Continuously pressing the increase or decrease key setting value will quickly change. Press it againSETReturn the key instrument to normal working state, set the temperature, and start heating;
3. After finishing the work, cut off the power, wipe the working surface clean, and remove water droplets and dirt.

• Usage Notes

1Grounding the power socket for

2Do not directly contact the working surface during work to avoid burns

3When heating at high temperatures, place the thin plate at a lower temperature to avoid bursting

4Heating does not work, please check the fuse