YMD150W ceiling mounted LED explosion-proof floodlight

Widely used for general and operational lighting in hazardous environments such as oil extraction, refining, and chemical engineering, as well as in offshore oil platforms, oil tankers, and other places;
Suitable for energy-saving renovation projects and places where maintenance and replacement are difficult; Suitable for places with high protection requirements and humidity.
Suitable for Zone 1 and Zone 2 locations in explosive gas environments;
Suitable for Class IIA, IIB, IIC explosive gas environments;
Suitable for temperature groups T1~T6.

Basic Parameters:
Light source: Imported LED
Power: 20W-300W

Explosion proof mark: Exde IICT6
Protection level: IP66
Rated voltage: 220v-50Hz
Incoming thread: G3/4
Cable introduction: 8-14mm
Lamp weight: 10kg
Power factor: greater than 0.95
Color rendering index: greater than 95rx
Insulation level: I
Color temperature: 6000K
LED light source brand: Kerui 3535 SMT
Power supply: High performance waterproof power supply, equipped with surge protection and lightning protection treatment
Emergency locations: corridors, trenches, warehouses, maintenance facilities, safety passages, etc
LED light source brand: American Corui 3535-XTE
Color: earthy yellow, other colors such as gray and white, can be customized according to needs.?
Packing method: carton+foam (reinforced by external packing belt)
Company Name: Zhejiang Yamin Explosion proof Technology Co., Ltd

Brand: Yamin Explosion proof

YMD150W ceiling mounted LED explosion-proof floodlightProduct advantages:
1: All high-power LED floodlights use imported chips from abroad.
2: Efficient and energy-saving, with electricity consumption only 30% of energy-saving lamps and 10% of incandescent lamps, affordable and low-carbon
Save energy. The brightness is equalWThree times the brightness of ordinary energy-saving lamps and nine times the brightness of ordinary light bulbs.
3: Long lifespan, low power consumption, pure color, and no pollution. Its lifespan is also over 45000 hours and maintenance costs are low.
4: The use of * switch constant current source technology ensures stable operation of the LED.
5: Start without delay, reach normal brightness upon power on, no need to wait.
6: The LED is directly connected to the housing, and is cooled by the heat dissipation wings of the housing and air convection. The lamp housing adopts
High quality aluminum material is used for precision car aluminum molding, which can effectively dissipate heat and ensure the lifespan of the light source.