High power explosion-proof floodlight in factory workshop

BAT53-400High power explosion-proof floodlight in factory workshop

Explosion proof floodlight is aHigh brightness explosion-proof floodlightThere is also one大功率防爆投光灯With a power of up to 400W, it is suitable for large-scale projection lighting in flammable and explosive places, oil fields, offshore oil platforms and ships, metallurgy, petrochemicals and other indoor and outdoor operations, construction sites and large equipment.

BAT53-400High power explosion-proof floodlight in factory workshopPerformance Characteristics

1. All light sources and electrical appliances are made of German brand (Osram), which has a long lifespan, reliable performance, and brightness 10%~20% higher than similar products, saving the trouble and inconvenience of frequent bulb replacement.

2. The transparent parts have been optimized and processed, with soft light, uniform illumination, and no ghosting, effectively avoiding eye discomfort and fatigue during operation.

3. Exquisite structural design, good heat dissipation performance, effectively reducing the body temperature of the lamp and improving its service life.

4. Has good electromagnetic compatibility and will not cause any interference to various electrical appliances and transmission networks.

5. The shell adopts high-tech surface spraying technology, which is wear-resistant, corrosion-resistant, waterproof and dustproof, suitable for various harsh environments.

6. The shell is made of imported lightweight alloy, supplemented by multiple pressure reducing seismic design, with good impact resistance performance.

7. Multiple installation methods such as seat, ceiling, wall mounted, etc. are safe, simple, and convenient.

Determine the installation position and method of the lighting fixtures according to the actual needs of the work site, and then prepare a corresponding length of three core cable with a diameter of 8~14 mm based on the distance from the lighting fixtures to the power contact.

Open the end cover of the ballast, loosen the clamping nut of the ballast cable inlet, thread the lamp cable and power cable through the clamping nut and into the internal wiring terminal of the ballast, connect and fix them, and then tighten the cable clamping nut and the ballast end cover separately.

Install the lighting fixtures and ballasts according to the determined installation position and method, and then connect the other end of the ballast input cable to the 220V power supply according to explosion-proof requirements for lighting.

Loosen the screws at the bottom of the lamp holder bracket to adjust the lighting direction by rotating the bracket 360 ° left and right; Loosen the screws on both sides of the lamp holder bracket, adjust the lighting angle of the lamp holder up and down according to the lighting needs, and then tighten the screws.

When replacing the light bulb, use a suitable screwdriver or other tool to insert it into the two protruding holes on the side of the front cover, unscrew the front cover, remove the faulty light bulb, and replace it with a new one.

Precautions

1. During transportation, the lamps shall be installed in the cartons provided, and foam shall be added for shock absorption.

2. When installing and maintaining lighting fixtures, the power must be disconnected first

3. When in use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; The center temperature of the transparent component is high and should not be touched.

4. When replacing light bulbs, use bulbs of the same type and power; If the type or power of the light bulb is changed, the matching ballast should be replaced accordingly.

Safety Warning

1. It is strictly prohibited to turn on lighting fixtures with electricity on.

2. Non professionals are not allowed to install or dismantle lighting fixtures and ballasts at will.

1Classification of BAT52 integrated explosion-proof floodlights (based on the equipped light source):

1. Metal halide lamps (light source brands generally choose Shanghai Yaming and Philips)
BAT53-L70 explosion-proof floodlight
BAT53-L100 Explosion proof Projection Lamp
BAT53-L150 explosion-proof floodlight
BAT53-L250 Explosion proof Projection Lamp
BAT53-L400 explosion-proof floodlight
BAT53-L1000 explosion-proof floodlight
2. High pressure sodium lamp (light source brands generally choose Shanghai Yaming and Philips)
BAT53-N70 Explosion proof Flood Light
BAT53-N100 Explosion proof Flood Light
BAT53-N150 Explosion proof Flood Light
BAT53-N250 Explosion proof Flood Light
BAT53-N400 Explosion proof Flood Light
BAT53-N1000 Explosion proof Flood Light