-
E-mail
sales2@handelsen.cn
-
Phone
15801397840
-
Address
B-1707, 17th Floor, No. 222 Wangjing Xiyuan, Chaoyang District, Beijing
Product Categories
Beijing Handasen Machinery Technology Co., Ltd
2206B hydraulic pump
NegotiableUpdate on 03/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
2206B hydraulic pump $r $nRoquet 1G6CIJ23F 2206B space only allows pump bodies with a length of ≤ 80mm, traditional pumps (length ≥ 100mm) cannot be installed. Roquet customized 1G6CIJ23F 2206B for a wind power enterprise, reducing the pump body length to 70mm and changing the drive shaft to a short shaft B-type (length 20mm), while maintaining a torque of 25Nm and continuous pressure output of 150bar to meet the power requirements of the yaw system.
Product Details
Roquet 1G6CIJ23F2206B hydraulic pumpSolution for non-standard hydraulic requirements in special industries
Hydraulic equipment in special industries such as wind power, naval, and food processing often faces the dilemma of "no pump options" due to "narrow space," "harsh environment," and "inconsistent standards," such as the high-altitude narrow installation space of wind power yaw systems and the hygiene requirements of food equipment. Roquet 1G6CIJ23F 2206B customized hydraulic pump, relying on Roquet's over half century of hydraulic technology accumulation, can customize the structure, material and performance according to needs, and there is a gap in non-standard requirements for special industries.
1、 Roquet 1G6CIJ23F 2206B customized core direction (based on Roquet technology system)
| Customized dimensions< | Customization scope< | Adapt to industries and scenarios< | technical standard |
|---|---|---|---|
| Customization of structural dimensions | Pump body length: 65-120mm (can be shortened to 80% of standard pump) | Wind power high-altitude equipment, small naval machinery | Maintain hydraulic balance design, pressure fluctuation ≤ ± 5 bar |
| Drive shaft type: short shaft B type, special taper Z type, keyless shaft | Precision machine tools, medical equipment | Shaft diameter accuracy ≤ 0.01mm, torque 25-40Nm | |
| Front end cover specification: ultra-thin 22 type (thickness 8mm), customized installation hole position | Integrated hydraulic system, small construction machinery | Installation hole position tolerance ≤ 0.1mm | |
| Material Customization | Pump body: 316L stainless steel, galvanized cast iron | Food processing (316L), sodium (galvanized) | 316L meets FDA certification, galvanized and salt spray resistant for 500 hours |
| Sealing components: food grade nitrile rubber, fluororubber | Food processing and high-temperature equipment | Working temperature -30 ℃~+120 ℃ (fluororubber) | |
| Performance parameter customization | Displacement: 0.5-10 cm ³/rev | Small equipment (0.5cm ³/rev), large machinery (10cm ³/rev) | Displacement accuracy ± 2% |
| Pressure: 100-300 bar (continuous) | Low pressure equipment (100bar), high pressure system (300bar) | Pressure stability ± 3bar | |
| Speed: 500-6000 RPM | Wind power yaw (500RPM), high-speed machine tool (6000RPM) | Speed fluctuation ≤± 1% | |
| function integration | Pressure sensor interface, built-in overflow valve | Intelligent hydraulic system, equipment with high safety requirements | Sensor accuracy ± 0.5% FS |
二、 Roquet 1G6CIJ23F2206B hydraulic pumpAddressing hydraulic pain points in special industries
The hydraulic requirements of special industries have the characteristics of "strong personalization and high standards", and the customization ability of Roquet 1G6CIJ23F 2206B can accurately solve:
1. Wind power industry: adaptation to high-altitude narrow spacesThe wind power yaw system is installed at the top of the tower, and the space only allows for pump bodies with a length of ≤ 80mm. Traditional pumps (with a length ≥ 100mm) cannot be installed. Roquet customized 1G6CIJ23F 2206B for a wind power enterprise, reducing the pump body length to 70mm and changing the drive shaft to a short shaft B-type (length 20mm), while maintaining a torque of 25Nm and continuous pressure output of 150bar to meet the power requirements of the yaw system. After installation, the equipment maintenance personnel provided feedback that "the space is suitable and the operating noise is ≤ 60dB", which meets the requirements of wind power equipment.
2. Food Processing: Hygiene and Safety AssuranceThe hydraulic pump of food equipment needs to come into contact with food raw materials. Traditional cast iron pumps are prone to rusting, and seals may release harmful substances. Roquet customized 1G6CIJ23F 2206B for a food machinery enterprise, using 316L stainless steel pump body (surface roughness Ra ≤ 0.8 μ m) and food grade nitrile rubber seals, certified by FDA. In use, the pump body is rust free and the seals have no odor, solving the risk of traditional pumps contaminating food. The equipment has passed the HACCP system audit.
3. The naval industry: corrosion prevention and durabilityThe naval equipment is exposed to seawater humidity for a long time, and the traditional pump body will rust and be scrapped after 3-5 years. Roquet customized 1G6CIJ23F 2206B for a shipbuilding enterprise, using galvanized cast iron pump body (zinc layer thickness ≥ 80 μ m) and fluororubber seals, with salt spray resistance of over 500 hours. Installed in the hydraulic servo system of a small naval boat, after 5 years of use, the pump body shows no obvious corrosion, the seals are not aged, and the service life is extended by 2 times compared to traditional pumps.
3、 Roquet 1G6CIJ23F 2206B Customization Process and Consulting Channels
The customization process of Roquet 1G6CIJ23F 2206B follows the four steps of "requirements design testing delivery":
1. requirements alignmentProvide equipment drawings and operating parameters (such as installation space, pressure, temperature), Roquet technical engineers conduct requirement analysis, and issue a customized plan draft (including parameter tables and 3D drawings), with a cycle of 3-5 working days.
2. Design and SimulationAfter the scheme is confirmed, Roquet uses CAD for structural design and verifies hydraulic performance (such as pressure loss and flow distribution) through CFD simulation to ensure that the requirements are met, with a cycle of 7-10 working days.
3. Sample testingAfter making the samples, they will pass Roquet's fatigue test (1000 hours of continuous operation), noise test (≤ 65dB), and environmental test (high and low temperature, salt spray). After passing the tests, they will be delivered to the customer for trial use, with a cycle of 15-20 working days.
4. batch deliveryAfter the trial confirmation, Roquet will start mass production, provide customized technical documents (installation manual, maintenance guide), and arrange engineers to guide the installation on site. The cycle will be determined according to the order quantity (usually 20-30 days).
Similar Product Recommend
